Content |
REGIA 2048 Opera is a new lighting console designed and manufactured for a wide range of professional applications. REGIA 2048 Opera?s features are among the best in its category: 2048 DMX channels, four independent DMX lines, on-board CD burner, built-in hard disk and two SVGA outputs for outboard monitors to display the status of each fixture used via a cutting edge graphic interface. Motorized A & B Masters, track ball to accurately position mirrors and movin heads, Shape Engine, personalities library for all major fixture models, unlimited multi-part cues.REGIA 2048 Opera comes in a sturdy metal chassis with very low weight and compact dimensions, facilitating transport and installation.The unit also has an integrated UPS which ensures approximately 30 minutes free-standing operation in the event of a power failure, and it?s protected against incorrect connection to a 380V mains power supply.
TECHNICAL DATA CONTROL PANNEL 96 Manual Presets 24 Playback Registers 36 Virtual Registers per page Motorized A and B masters FEATURES Personality libraries Direct Fixture, Group, Palette and Cues access Shape Engine Unlimited number of Cues Unlimited number of Cues-List Unlimited number of Pages WYSIWYG CE in bundle Flash memory card OUTPUT 2048 DMX channels 4 independent DMX 512 lines HARDWARE Track ball / mouse 2.5“ 5 encoders knobs 11 function keys Keyboard Optical mouse CDRW burner on-board On-board hard disk 3.5? Disk drive on-board Anti-blackout buffer battery; running time: 30 min. MONITOR 1 output SVGA display 1 not included (optional touch screen) 1 output SVGA display 2 not included CONNECTIONS 4 DMX Out, 1 DMX In, MIDI In / Out / Thru, SMPTE In, LAN 1 / 2, RS-232, RGB1 / 2, Printer port, Keyboard / Mouse, AUX In DIMENSION (HxWxD) 16,5 x 120 x 56,5 cm WEIGHT 35 kg |
24/48 Channels of dimming control with capability for 12 moving lights
The ?Frog? range of control desks builds upon the foundations of the Sirius and XL families using the latest technologies to bring new and improved features. As Zero 88 products, the Frog desks naturally retain the same ease of use, reliability and affordability as their predecessors. The FatFrog can control up to 48 generic channels, which may be manually or automatically patched to any of the 512 DMX channels, there is also capability for control of up to 12 intelligent fixtures. The desk is fitted with a floppy drive for loading and saving show data, a remote ?Go? port and an output for a monitor. Memories can be recorded as scenes or chases, each having its own fade times and modifiers. Memories may be played back with the crossfade master and the ?Go? button for sequential, pre-programmed shows. Extra flexibility is afforded through the 240 submasters allowing for the creation of lighting effects for the more spontaneous shows.Don?t be fooled by its simplicity and ease of use; the Fat Frog offers a host of powerful features, making it a formidable tool for creating shows. Its versatility makes it ideal for all entertainment lighting applications allowing even relatively inexperienced operators to create exciting shows. The movement effects engine allows for simple and rapid programming of commonly used effects, whilst the inbuilt fixture library enables simple selection and manipulation of the moving lights. The unique ?F.R.O.G.? (fixture random output generator) function can instantly generate unique lighting effects. These may be outputted automatically or stepped through, with desired looks being recorded as required.
Features * 24/48 dimmer channels * 240 submasters * Softpatch * 999 Memories * 24 palettes for Colour, Beamshape, Position * Disk Drive * 12 Moving Lights * Effects Generator * FROG Autochase function * Fixture library with over 1200 moving lights * 'GO' button for memory playback * 2 DMX Outputs * SVGA Monitor ouput |
Mixer for standard lighting control DMX-512 . Allows the recording of 4.600 steps in 96 programmes.
Great capacity of scenes and sequencies memory. Editable memory. Possibility to edit several
programmes simultaneously, by audio, crossfader or inner clock. Standard MIDI in, out and thru.
XLR-3 connector with inversor of polarity. | Comfortable DMX-controller
* 24 control channel
* 48 memorizable programs via 4 pages
* 12 scenes can be called directly via the faders
* Blackout-function
* Sound control via Line In connection
* 19" mounting dimensions with 6 units
FEATURES:
Power supply: 230 V AC, 50 Hz ~
via 9-12 V DC, 500 mA power unit included in the delivery
Power consumption: 4 W
Number of control-channels: 24
Sound-control: via Line In RCA-socket (min. 100 mV)
DMX 512-output: 3-pin XLR-connector with polarity selector
Dimensions (LxWxH): 483 x 264 x 90 mm
19" mounting dimensions with 6 u
Minimum mounting depth: 80 mm
Weight: 5 kg
70064540 |
Powerful theatre control for generic and moving lights, with a fast, easy to use interface.
For too long the creativity of lighting professionals has been stifled by the limitations and excessive cost of high end lighting control. The Illusion has been designed to challenge this status quo. Using leading edge technology, exceptional graphics and user definable modes of operation, the Illusion performs as a fast, effective lighting tool.
The addition of moving light control software to the Illusion makes it an exceptionally powerful controller with many features previously only found in more expensive consoles. The only limit on the number of moving lights available is the 512 DMX channels available. Three high resolution encoders allow for easy control of the moving light parameters. To facilitate ease of programming the Illusion makes use of palettes or focus groups for each type of LTP parameter. Building memories using palettes will ensure that changes to any palette are tracked through to the associated memories. Separate fade times can be set for parameters and for brightness channels allowing for exceptional flexibility in replaying shows. To further facilitate programming the Illusion has a powerful effects engine that allows for the creation of not only movement effects but also colour and beam effects. The comprehensive library of fixtures available ensures that the user can program any moving light. Fixture libraries are updated on a regular basis or it is possible to create your own unique fixture personalities using a free software tool. Programming moving lights is simple whether using the mouse and screen commands or using command line syntax. With powerful editing tools the desk allows users to track changes to memories forward and backwards or to change a single cue.
With 500 channels as standard, the Illusion features the phenomenally powerful Cueline system, which gives instant and clear graphical representation of the cue list allowing easy visualisation, operation and editing. The graphical user interface and memory stack are fully integrated. Modifications in the memory stack automatically update the Cueline system and vice versa. Using Cueline it is possible to create multipart cues that alter different parameters making the playback of moving lights intuitive and simple.Clear front panel controls can be configured to suit your preferred style of operation, with a choice of command line operation or full GUI. Powerful shortcuts, associations and macros can be set up to aid the programming operation whilst flexible linking and triggering operations make the replay of complex lighting sequences extremely simple. Multi-part cues, linked submasters, follow-ons, audio effects, channel groups and full LTP channel control can all be achieved without the need to search through endless menus or remember confusing key sequences.
Features
* 500 Control Channels * Up to 400 Memories * 108 Programmable Submasters * HTP & LTP Control * Go Button Playback * Two Manual Playbacks * Remote Triggering * Full Proportional DMX Patch to 512 Channels * Unique Cueline Interface * Multi-Mode Operation * Audio Effects * Palettes (Focus Groups) * Fixture libraries * Full Tracking * Parameter level programming * SMPTE, MIDI, DMX-IN and ChilliNet functionality available via optional kit |
Maxxyz is Martinʼs professional lighting console with a string of original features and an intuitive and graphical software interface.
* Integrated 3D Visualizer: preview or program in real-time 3D
* Digital LCD buttons for fast and direct programming
* Multiple wing attachment
* Up to 32 DMX universes, 8 available directly from the console
* Dual processing power, 2 Pentium CPUs
* Maxxyz Manager Software for programming and triggering via time and calendar schedules
* Customizable Graphical User Interface with context sensitive toolbars and integrated help menu
* Powerful effects engine
* Controls up to 16384 fixtures
* 1000 cuelists with motorized fader control
* 1000 cuelists with playback control buttons
* 12 customizable function keys
* Parallel execution of multiple cuelists
* Submaster, groupmaster and override functionality
* Parameter and time-fanning functionality
* Auto update for presets and cues
* On-the-fly global timing adjustments
* Networking with Maxedia media server
|
Reviews
There are no reviews yet.