SHOWTEC 34000 Safeled Emergencylight including 3 labels

• Led technology
• Low power consumption
• Double function emergency light

Input Voltage: 100~240 VAC…50/60Hz
Power consumption: 9,3W
LED type: 5050 SMD
LED quantity: 30pcs
Lumen Output: 400Lm, 131Lm*
* = when Emergency exit label is mounted
Battery: Ni-CD 800mA 7,2V
Emergency duration: 60 minuts max.
Full in compliance with EN60598-1, EN60598-2-22, EN55015, EN61547, EN61000-3-2 and EN6100-3-3
Emergency light comes including 3 types of emergency exit labels.
Dimensions: 302 x 150 x 52mm
IP Rating: IP-65
Housing: ABS Plastic
Weight: 1,03Kg

• 4-way power strip with plastic housing
• Sockets are 45° rotated /Ability to connect corner plugs
• Surge protection / child protection
• Voltage: 230V
• Maximum load: 3500W/16A
• 2 USB ports 5.0V/2.1A
• Degree of protection: IP20
• Light switch On/Off to save energy
• Cable length: 1.5m
• Cable type: H05VV-F 3G1.5mm²
• Dimensions (HxWxD): 34x6x5 cm
• Colour: Black

Info

Extension Cable DMX, IP65, 3 meters, with XLR 3 pin, male and female.

FULL-BRIDGE PWM MOTOR DRIVER

The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.

The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation.

A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.

An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A.

Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.

*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN

STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole

• Able to drive both windings of bipolar stepper motor
• Output current up to 750 mA each winding
• Wide voltage range: 10 V to 46 V
• Half-step, full-step and microstepping mode
• Built-in protection diodes
• Internal PWM current control
• Low output saturation voltage
• Designed for unstabilized motor supply voltage
• Internal thermal shutdown

Power supply for Atomic Strobe or Colourchanger.