• Plug and Play • Cost Effective • Infra Red Remote Controller included • Built-in Programs (fades) • 3M Tape A plug and play Flexstrip set which can be used for numerous applications. The Flexstrip set comes including power supply, IR remote control and 300cm of Flexstrip. Operating is easy with the IR remote control […]
• Plug and Play
• Cost Effective
• Infra Red Remote Controller included
• Built-in Programs (fades)
• 3M Tape
A plug and play Flexstrip set which can be used for numerous applications. The Flexstrip set comes including power supply, IR remote control and 300cm of Flexstrip. Operating is easy with the IR remote control that allows you to set fixed colors and smooth color change fades.
Specifications LED: 5050 RGB, 30 LEDs per meter.
Length: 300 cm
Power consumption: 21,6W
Power supply: 12V, 1.5A
PCB color: White, 10mm wide
Beam angle: 120 degrees
Included: Controller, IR remote, Power supply
The Flex-Strip Set should not be used in sealed or hot places. Always mount on an aluminium or metal surface for best heat dissipation. It is not possible to extend the strip without using a repeater.
Weight
1.00 kg
Reviews
There are no reviews yet.
Be the first to review “SHOWTEC 42770 Flexstrip Set 300 cm” Cancel reply
• Plug and Play
• Cost Effective
• Infra Red Remote Controller included
• Built-in Programs (fades)
• 3M Tape
A plug and play Flexstrip set which can be used for numerous applications. The Flexstrip set comes including power supply, IR remote control and 300cm of Flexstrip. Operating is easy with the IR remote control that allows you to set fixed colors and smooth color change fades.
Specifications LED: 5050 RGB, 30 LEDs per meter.
Length: 300 cm
Power consumption: 21,6W
Power supply: 12V, 1.5A
PCB color: White, 10mm wide
Beam angle: 120 degrees
Included: Controller, IR remote, Power supply
The Flex-Strip Set should not be used in sealed or hot places. Always mount on an aluminium or metal surface for best heat dissipation. It is not possible to extend the strip without using a repeater.
NON Waterproof CCW led strip 240pcs/meter 19,2watt/meter
Number of LEDS: 60pcs/m
Power: 14.4W/M - Total: 72A
1 LOT=1ROLL=5METER=16.4FT
5 meter appearance size: 5000 mm x 10 mm
Light life: > 50000 hours
Waterproof level: bare plate (IP65)
Working temperature: - 20 degreeto 50 degree
Light Angle: 120 degrees
PCB specification: 6.5 * 11.5 mm (5050 single crystal monochrome and three monochromatic crystal),
1 SET RGB+24KEY Controller Package included:
1x waterproof 5050 RGB led strip light
1x IR Remote Controller(24KEY)
1x IR Receiver
1x 12V 5A Power Adapter LX12-05
The Touch! wireless RGB LED Controller is our most advanced and easiest to use RGB LED controller. With this controller, you can use the touch wireless remote to control your RGB LED fixtures, providing full color and brightness control. Simply connect this unit to your RGB LED fixtures and a power supply, grab the remote control, and start controlling your fixture.
Choose any color output using the touchwheel on the remote control, or choose from 11 pre-programmed scenes.
The RGB Touch Controller is a colour-change control system for LED lighting.
It features the latest in capacitance and wireless touch technology, to ensure an increased lifespan and reliability by eliminating the mechanical wear associated with physical buttons.
The wireless range of the kit is approx 20m and incorporates a new PWM control technology to eliminate the flicker between colour changes.
Many features come as standard including multi-type memory functions for colour, modes, speed and brightness/dimming.
The kit comes boxed and complete with user manual, simple-to-install input/output receiver and capacitive-touch, colour wheel handheld controller.
Technical parameters:
Controller：
Working temperature：-30℃~+60℃
Supply Voltage：DC5V/DC 12V-24V,
Output：3 channels N-MOS Drain open output
Connection mode：common anode
Static power consumption：<0.5W
Output current： 6A*3Ch=18A 6A(Each channel)
controller dimension：：L83 Χ W79 Χ H33 mm
Package size：L205ΧW135ΧH45mm
Net Weight：168g
Gross Weight：392g
Remote Control:
Working temperature：-30℃~+60℃
Power supply mode：2pcs NO.7 Battery
Supply voltage：3V
Static power consumption：<0.09mW
Static current：10uA
Operating current：15mA
Remote-controlled distance：>20M
Stand-by time：6 months
External dimension:
Remote control Function instruction:
changing models are as below:
Connection Instruction:
DC+： For power input +（power supply voltage12v-24v）
DC-： For power input -
V+： For Load Common anode
R/CH1： Load output Red channel
G/CH2： Load output Green channel
B/CH3： Load output Blue channel
Power： Red indicating light is for power light，when the power on it will be turn on.
Receiver： Green indicating light, normally it will be in the state of OFF,it will be twinkle
when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be
twinkle in a Fixed frequency to indicate the user.
Typical Applications:
Notes:
1. The use of power and load voltage, current, power must be consistent with the product.
2. Please make the connection like the diagram above（to connect the load wire first, than to connect with the power），In the process of operation please avoid short circuit.
3. This product warranty is 24 month，But not including the damage by people and other reason caused by over load working.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Remote control Function instruction:
changing models are as below:
Connection Instruction:
DC+： For power input +（power supply voltage12v-24v）
DC-： For power input -
V+： For Load Common anode
R/CH1： Load output Red channel
G/CH2： Load output Green channel
B/CH3： Load output Blue channel
Power： Red indicating light is for power light，when the power on it will be turn on.
Receiver： Green indicating light, normally it will be in the state of OFF,it will be twinkle
when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be
twinkle in a Fixed frequency to indicate the user.
Typical Applications:
Notes:
1. The use of power and load voltage, current, power must be consistent with the product.
2. Please make the connection like the diagram above（to connect the load wire first, than to connect with the power），In the process of operation please avoid short circuit.
3. This product warranty is 24 month，But not including the damage by people and other reason caused by over load working.
Reviews
There are no reviews yet.