| Content |
• 70W COB LED Source
• 2 DMX channels
• Multi-voltage
• Large 90 degree beam angle
The Showtec PAR56 COB white Spot is a new technology of LED packaging for LED light engines.
Because Multi LED chips are packaged together as one lighting module it is now possible to achieve a very high light output without narrowing the beam angle. Due to the special design of the mirror it is possible to project a light beam up to 90 degree's without getting different color shades ore high spots on the projected surface. This effect is great for most applications where you would need an equally divided wash of light.
Specifications Output
Lux @2m: 1800
Max distance: 10m
LED Quantity: 1 x 70W White COB
Color temp: 7000-8000K
Dimmer: 0-100%
Strobe: 0-20Hz
Refreshrate: 7,8 KHz
Beam Angle: 90 degrees
Control
On Board: Display for easy Set Up
Options: DMX512, Auto, Manual
DMX personality: 1, 2, Channel
Filterframe: Not available
Barndoor: Not available
Electrical
Input Voltage: 100~240VAC...50/60Hz
Power consumption: 76W max @FO
Physical
Dimensions (LxWxH): 240 x 172 x 330 mm
Weight: 2,3 kg
IP Rating: IP-20
Connections: Schuko + XLR 3 pole
Cooling: Forced Cooling (Fan)
|
Eurolite LED PAR56 RGB CHROME 20W
A new look for an old acquaintance
DMX-512 control via regular DMX-controller (occupies 6 channels)
Sound-control via built-in microphone
Color-change speed adjustable via dip switches
Illumination angle approximately 45?°
Locking possibility at the mounting bracket
For illuminating e. g. mirror balls, entrance or counter areas or as basic illumination
Perfect in public places, main halls, stages, lounges
Multi-color color-changes
Advantages of LED-technology: extremely long life, low power consumption, minimal
heat emission, defacto maintenance free with brilliant light radiation
Available in alu or in black
Specifications:
Power supply: 230 V AC, 50 Hz ~
Power consumption: 20 W
Dimensions: 220 x 210 x 220 mm
Weight: 1.5 kg
Number of LEDs: 151
|
Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a polished housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 80 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Fan
- Sturdy aluminium housing with polished or black finish
Specifications - Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Polished
- Dimensions (without mounting brackets): 260 x 280 x 300 mm
|
Info
LED Neon Flex 230V white 5000K 91cm
|
18 x 8W QUAD Colour LED RGBW PAR Can in black housing
Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.
It is operated using four buttons and an LED display on the back.
The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.
There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.
The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.
- Type: Studio PAR 64
- Colour spectrum: RGBW
- Number of LEDs: 18
- LED type: 8 W QUAD colour
- Refresh rate: 5000 Hz
- Beam angle: 25°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin male
- DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
- DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
- Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED display
- Power supply: 110 V AC - 250 V AC
- Power consumption: 170 W
- Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
- Housing material: metal
- Housing colour: black
Dimensions without mounting bracket
- Width: 230 mm
- Height: 220 mm
- Length: 255 mm
|
The Cameo CLPFLATPRO18IP65 is purpose designed for outdoor use and rated IP65 according to EN 60529. With a powerful illuminance of 23,000 lux and a silent, passive cooling design the super slim professional PAR light is the perfect choice where space is limited. It features 18 ultra bright high performance 10 watt LEDs for impressive, rich RGBWA colour mixing, a 30° beam angle and 3,000 Hz refresh rate to eliminate flicker.
The CLPFLATPRO18IP65 provides master, slave and standalone capability and a total of 5 DMX modes with numerous functions, integrated programs and an LED Display with mode, enter, up and down controls for easy manual operation.
The Cameo CLPFLATPRO18IP65's black die-cast enclosure is protected against dust and low pressure water jets from all directions. It includes dedicated screw connectors for DMX signal and power input and output for daisy-chaining up to 10 units. The universal bracket offers a wide variety of mounting options.
- Colour Range: RGBWA
- Number of LEDs: 18
- LED Type: 10 W
- Beam Angle: 30°
- DMX Input: XLR 3-pole, XLR 5-pole
- DMX Output: XLR 3-pole, XLR 5-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: LED Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 200 W
- Power Connector: 3-pin special screw connector
- Housing Material: Metal
- Housing Colour: Black
- IP Class: 65
- Type of cooling: Convection
- Illuminance (lx 1m): 23000 lx
- Dimensions (without mounting bracket): 280 x 280 x 160 mm
|
Reviews
There are no reviews yet.