| Content | Multi Exchanger 72CH. DMX/Analog 3 & 5 pin - Convert the signal from DMX-512 to 72 CH. ANALOGUE output.
Control Mode DMX, MIDI, Stand Alone
LED Indicators Operation mode, Signal
Maximum Ambient Temperature 35
Power Supply 240 VAC 50-60 Hz
Power Connector in Schuko Plug
DMX Connector XLR 3P In/Out, XLR 5P In/Out
DMX Connector in XLR 3P, XLR 5P
DMX Connector out XLR 3P, XLR 5P
Installation Depth (excl. connector) 126
IP Rating IP20 (indoor use only)
Housing Aluminum die-cast
• Convert the signal from MIDI to 72 CH. ANALOGUE output.
• The front panel alpha-numeric display shows the DMX start address & programming options.
• The last scene remains when DMX disappears.
• Pre-store a scene and is available for emergency.
• Memory backup with EEPROM.
• CHASE function can be selected from 1 to 72 channel & speed control.
• Select ANALOGUE output from +(-)10V, +(-)12V and +(-)15V.
• Receive NOTE ON/OFF signal of MIDI.
Technical Info
Voltage: 230V
Dimensions: 483 x 130 x 45 mm (LxWxH)
Weight: 1,65 kg |
LED PC-Control 512 DMX-software with interface Features: > 1 DMX universe > Automatic program generator with X-Pan, Y-Tilt and RGB effects > Graphic patch Eeditor for DMX fixture addressing > Quick fixture profile editor with 3000 files (libraries) included > Advanced Matrix editor to allow all LED configurations > Several menu languages (French, English, German, Chinese) > Full RGB (W/A) color + dimmer management and rendering > Graphic 2D edition of the fixtures > Up to 5120 channels with several plugged interfaces > Fade-in time between programs and scenes > Graphic and user friendly live board that can be operated by touch screen > Colors, dimmer, speed, black out and pause can be managed in live mode > Multiple program triggers > USB 2.0 to 512 DMX channels (2 x 512 channel version is available PC-Control 1024) > Pilot LED to indicate the current DMX signal state > High voltage proof > DMX output speed signal can be configured for perfect DMX line stability and full compatibility with any electronic fixtures (Mab, Break, Delay, frequency 1 to 45 Hz) > Strong aluminum housing that can be wall mounted > Operating system: Mac Os X, Windows 32 or 64 bit (2000, XP, Vista, 7) > CPU: 1 Ghz , RAM memory: 512 Mb, Hard disk space: 150 MB (51860150) |
-
Product Features:
This DMX512 encoder options the advanced micro control unit, It can receive the DMX512 standard digital control signal which is internationally widely used It changes the signal into PWM control signal to actuate the LED lamp It can also connect the DMA digital console to change the light or each dynamic effect In addition, when the decoder is not connected with the DMA console, it can be used as a synchronous controller That is to say you can Synchronously control number of decoders and LED lights
Basic parameters:
Basic parameters
Product Name: DMX512 Decoder
Supply voltage: DC12-24V
Output channels: 3 channels (R, G, B, ) or 4 channels (R, G, B, W )
Output current: Max.8A Per Channel
Output Power 1:12V:<288W, 24V:<576W (3 channels)
Output Power 2:12V:<384W, 24V:<768W (4 channels)
Operating temperature: -20-60C
Controller size: L166*W67*H41(mm)
Box size: L176*W84*H50(mm)
Net weight: 360g
Gross weight: 408g
DMX512 standard: DMX512/1990
Control mode: button control, 512 console control
Accessories: A pair of XLR plugs
Package List:
1 * DMX Decoder
1 * Male and female XLR connectors
1 * User manual
|
- Professional 6-way DMX splitter / booster
- Chassis 1U 19" rack-mount enclosure
- 6 electrically isolated XLR (3-pin / 5-pin) outputs
- DMX status indicator per channel
- Power status indicator
- Switchable 120 Ohm terminating resistor for the DMX THRU output jack
- Front and rear rack-mount angle attachment options
The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
Product type
Other Lighting Accessories
Type
DMX splitter / booster
DMX inputs
2 (parallel)
DMX input connectors
XLR 3-pin male , XLR 5-pin male
DMX Thru Outputs
2 (parallel)
DMX Thru Output Connectors
XLR 3-pin female , XLR 5-pin female
DMX outputs
6
Controls
DMX Thru Terminator , Power On/Off
Indicators
6 x Power LED , 6 x Signal LED
Mains connector
IEC power connector
Operating voltage
transformer
Operating voltage
230 V AC, 50 Hz
Power consumption
15 W
Width
483 mm
Height
44 mm
Depth
160 mm
Weight
2,976 kg
Accessories (included)
Power cord | Signal splitting/amplification is easier now thanks to the D6 Branch from American DJ. This DMX Splitter/Amplifier allows for the easy connection to lighting units and the transmission of signals to them. Lightweight and easy to mount, functions perfectly as a transmission hub for any permanent setup or mobile entertainment system.
Do you want to manage your DMX fixtures in a more organized fashion using an easy solution? The D6 Branch from American DJ is the solution you need. The D6 Branch Splitter/Amplifier allows you to make your fixtures easy to manage. By significantly reducing your need for DMX cables in your production you make set-up easier, reduce the risk of a plug failure or tripped over wire, while also making your whole production cleaner and less cluttered.
Though lightweight, the D6 Branch is built from high quality materials making it the ideal blend of functionality, durability and portability. This unit is perfect for any club, bar, stage or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed in relation to one another. Modernize your light show production today, go professional with the D6 Branch DMX Splitter/Amplifier from American DJ.
- 6-Way DMX Splitter & amplifier
- 1x DMX In, 6x DMX Out & 1 DMX Thru (all 3-pin XLR’s)
- Link with other D6 Branch Splitters
- Input & outputs are electrically and optically isolated from each other
- Includes two straps to securely attach to truss
- Clamp mount bracket included
- On/Off power switch
- Multi-voltage operation: AC 100-240V, 50/60Hz (IEC Socket)
- Dimensions (LxWxH): 4.75”x5”x6” / 118.5x122.5x153mm
- Weight: 2.5 lbs/ 1 kg.
|
| Power supply: |
100-240 V AC, 50/60 Hz
12 V DC 1 A |
| Power consumption: |
1 W |
| Power connection: |
Mains input via 4-pin screw plug connector (M) mounting version power supply cord with AC adapter (provided) |
| DMX input: |
2 x 3-pin XLR (M) mounting version |
| DMX output: |
1 x 3-pin XLR (F) mounting version |
| Use of brands: |
Built with NEUTRIK connector |
| Dimensions: |
Width: 13 cm
Depth: 7 cm
Height: 4,1 cm |
| Weight: |
500 g |
|
Reviews
There are no reviews yet.