SHOWTEC 51329 Galactic RGB850 850mW Red/Green/Blue Laser, ILDA & DMX

Discontinued

2,145.69 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
• Sealed Optics • DMX & ILDA control • 20K Scanner pair • Very wide beam angle • Runs pre-programmed shows from SD card • Flightcase, ILDA cable & 1G SD card included The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the […]

 

Read more

• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• Very wide beam angle
• Runs pre-programmed shows from SD card
• Flightcase, ILDA cable & 1G SD card included

The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the new 200mW 638nm red laser, the visual brightness is around a 1.2W traditional RGB laser with 660nm red laser. It has beautiful clear colors created by these 3 separate laser-diodes, Red, Green and Blue with TTL modulation. The RGB850 can be controlled by DMX and has many built-in figures and patterns. It can project two built-in patterns at the same time. You can also create your own designs and shows with any kind of ILDA laser software. The RGB850 is equipped with a 20K scanner pair which makes faster and bigger projections possible with less flickering. For rental solutions you can use the SD card slot to run pre-programmed shows without any controller.

Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area’s a remote interlock is necessary for safety regulations.

Specifications

Power Input: AC 100-240V, 50/60Hz
Power Consumption: 68 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 850mW (200mW 638nm Red, 150mW 532nm Green, 500mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-60˚
Control Modes: Auto, Sound, Master/Slave, DMX, ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 335 x 240 x 165mm (excl. bracket)
Dimensions flightcase: 760 x 435 x 315mm
Weight: 11,5 kg
Accessories: 2 Keys, Interlock test connector, flightcase, ILDA cable, 2G SD card

 

 

 

 

 

 

Weight 11.50 kg

Reviews

There are no reviews yet.

Be the first to review “SHOWTEC 51329 Galactic RGB850 850mW Red/Green/Blue Laser, ILDA & DMX”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHOWTEC 51329 Galactic RGB850 850mW Red/Green/Blue Laser, ILDA & DMX removeCameo IODA 1000 RGB - Professional Show Laser 1000mW RGB removeARTLIGHT RGB2W Laser 2000mW 25kpps ILDA scanner ,LCD,SD,X/Y, RGB dimmer removeJB Systems Radiant Laser removeCameo LUKE 700 RGB - Professional Show Laser 700mW RGB removeCameo D FORCE 3000 RGB Laser 3Watt remove
NameSHOWTEC 51329 Galactic RGB850 850mW Red/Green/Blue Laser, ILDA & DMX removeCameo IODA 1000 RGB - Professional Show Laser 1000mW RGB removeARTLIGHT RGB2W Laser 2000mW 25kpps ILDA scanner ,LCD,SD,X/Y, RGB dimmer removeJB Systems Radiant Laser removeCameo LUKE 700 RGB - Professional Show Laser 700mW RGB removeCameo D FORCE 3000 RGB Laser 3Watt remove
Image
SKU51329CLLIODA1000RGB638RGB2000130799CLLLUKE700RGBCLLDFORCE3000RGB
Rating
Price2,145.69 incl. GR VAT 1,245.41 incl. GR VAT 1,488.00 incl. GR VAT385.26 incl. GR VAT 638.60 incl. GR VAT 2,632.63 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityOut of stockOnly 1 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• Very wide beam angle
• Runs pre-programmed shows from SD card
• Flightcase, ILDA cable & 1G SD card included

The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the new 200mW 638nm red laser, the visual brightness is around a 1.2W traditional RGB laser with 660nm red laser. It has beautiful clear colors created by these 3 separate laser-diodes, Red, Green and Blue with TTL modulation. The RGB850 can be controlled by DMX and has many built-in figures and patterns. It can project two built-in patterns at the same time. You can also create your own designs and shows with any kind of ILDA laser software. The RGB850 is equipped with a 20K scanner pair which makes faster and bigger projections possible with less flickering. For rental solutions you can use the SD card slot to run pre-programmed shows without any controller.

Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations. Specifications Power Input: AC 100-240V, 50/60Hz
Power Consumption: 68 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 850mW (200mW 638nm Red, 150mW 532nm Green, 500mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-60˚
Control Modes: Auto, Sound, Master/Slave, DMX, ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 335 x 240 x 165mm (excl. bracket)
Dimensions flightcase: 760 x 435 x 315mm
Weight: 11,5 kg
Accessories: 2 Keys, Interlock test connector, flightcase, ILDA cable, 2G SD card  
   

 

 

 

With a strong output of 1,000 mW and red, green and blue color mixes the IODA 1000 RGB features diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1.5 mrad only. The red 638 nm diode achieves a significantly better visibility than a conventional 650 nm diode and makes the IODA 1000 RGB the ideal choice for highly professional laser shows.

With analog modulation for up to 16 million colour hues the Ioda Series professional show lasers generate stunning graphics projections with razor-sharp beams. Their dust proof dual layer aluminium enclosures separate the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. All Ioda laser lights sport high speed 30 Kpps scanners  8 degrees ILDA, a 60° scan angle and 128 impressive pattern presets. They provide an ILDA interface on 25-pin D-sub connectors for computer control, DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. They are also capable of master, slave and standalone operation, and the low noise fan keeps the compact units cool and quiet. They feature 3-pin DMX connectors, Neutrik powerCON mains inputs and outputs plus a key switch to prevent unauthorized use. For audience safety Ioda laser lights are equipped with a "Scan Fail Safety" system.

Note: Sharing identical presets, the Ioda lasers are compatible with the Luke series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.

  • Item number:CLLIODA1000RGB
  • Product type: LASER
  • Total power: 1000 mW
  • Colour spectrum: RGB
  • Wavelength(s): 638 nm, 532 nm, 447 nm
  • Beam Data: approx. 3 mm / 1.5 mrad divergence
  • Laser sources: Laser diode & DPSS
  • Laser class: 4
  • Scanner: High performance galvoscanner, 30 kpps  8 degrees ILDA
  • Max. scan angle: 60 degrees
  • Operating modes: ILDA, DMX-512, Auto, Sound Control
  • DMX input: 3-pin XLR
  • DMX output: 3-pin XLR
  • ILDA input: 25-pin Sub-D male
  • ILDA output: 25-pin Sub-D female
  • DMX mode: 4-channel, 12-channel
  • Controls: Mode, Enter, Value Down, Value Up
  • Display elements: LC display
  • Power supply: AC 100-240 V / 50-60 Hz
  • Power consumption: 100 W
  • Power connector: Neutrik PowerCon
  • Housing Material: aluminium
  • Housing colour: black
  • Dimensions (WxDxH): 188 mm x 201 mm x 210 mm (excluding bracket)
    cllioda1000rgbc
 

RGB2w (Red500mw/638nm; Green: 500mw / 520nm; Blue:1000mw/450nm) 25kpps scanner ,LCD,SD,X/Y, RGB dimmer

Laser diode      Laser power:2000mW

Color Balance:

Red>500mw/638nm ( 500mW/520nm OEM ( 1000mw/445 OEM (

Description

  •     The best of both worlds: a traditional 2 color laser + laser burst effects combined in one unit!
  •     Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ,...
  •     Class 3B laser based on 40mW 532nm green + 200mW 450nm blue laser.
  •     The color of the beams changes all the time using laser blanking technology.
  •     Several working modes:
    • DMX-control: 1channel for easy operation or 10 channels for full control
    • Standalone: sound activated (internal mic) or automatic
    • Master/slave: wonderful synchronized shows
    • Optional CA-8 remote controller available
    • Compatible with RF-DMX Converter:
      * Set the Radiant laser to 1CH DMX-mode
      * Set the RF-DMX Converter to MODE1
  •     Built-in microphone
  •     3-digit LED display for easy menu navigation
  •     Optional CA-8 controller for additional functions available
  •     Key actuated on/off switch and emergency switch (interlock) input for additional safety
  •     Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
  • Mains Input:  AC 100~240V, 50/60Hz
  • Fuse:  250V 1A slow blow (20mm glass)
  • Total Power consumption:  30W
  • Sound Control:  Internal microphone
  • DMX connections:  3pin XLR male / female
  • DMX channels:  1 or 10 channels
  • DMX starting address:  001 à 512
  • Laser Power: 
    • 40mW Green CW laser (λ = 532nm)
    • 200mW Blue CW laser (λ = 450nm)        
  • Laser radiation class:  3B
  • Beam diameter @ aperture: 
  • Divergence (each beam) 
  • Divergence (total output) 
  • Working temperature:  15°C to 40°C
  • Laser Safety Standard:  EN/IEC 60825-1 Ed2, 2007-03
  • Size:  25 x 24 x 19 cm
  • Weight:  2,6kg

Projecting red, green and blue color mixes with 700 mW output power the LLUKE 700 RGB includes diode and DPSS lasers with 3 mm beam diameters and no more than 2 mrad divergence.

The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners  8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.

Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.

  • Item number: CLLLUKE700RGB
  • Product type:  LASER
  • Total power: 700 mW
  • Colour spectrum: RGB
  • Wavelength(s): 650 nm, 532 nm, 447 nm
  • Beam Data: approx. 3 mm / 2 mrad divergence
  • Laser sources: Laser diode & DPSS
  • Laser class: 4
  • Scanner: High performance galvoscanner, 30 kpps  8 degrees ILDA
  • Max. scan angle: 60 degrees
  • Operating modes: ILDA, DMX-512, Auto, Sound Control
  • DMX input: 3-Pin XLR
  • DMX output: 3-Pin XLR
  • ILDA input: 25-pin Sub-D male
  • ILDA output: 25-pin Sub-D female
  • DMX mode: 4-channel, 12-channel
  • Controls: Mode, Enter, Value Down, Value Up
  • Display elements: LC display
  • Power supply: AC 100-240 V / 50-60 Hz
  • Power consumption: 75 W
  • Power connector: Neutrik PowerCon
  • Housing Material: aluminium
  • Housing colour: black
  • Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
 

Cameo D FORCE 3000 RGB

  • 3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
  • Beam alignment without the need for servicing!
  • Dust-proof aluminium casing for minimum maintenance
  • 30 kpps high-speed galvo scanner @ 8° ILDA
  • Analogue modulation for up to 16 million colour shades
  • Precise beams with extremely low divergence for razor-sharp projections
  • Interlock Out for sending the emergency switch-off signal
  • Control via ILDA
  • Scan Fail safety system
  • Neutrik powerCON mains input and output
  • Thermally activated fan for controlled operating temperature
  • Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)

The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections

The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.

This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.

Product type
Laser

Total power
3000 mW

Colour spectrum
RGB

Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm

Beam Data
2 x 4 mm

Laser sources
Laser diode

Laser Class
4

Scanner
30 kpps @ 8° ILDA

Max. scan angle
50 °

Operating modes
ILDA

Operating voltage
100 V AC - 250 V AC

Power consumption
110 W

Power connector
Neutrik PowerCon

Housing material
aluminium

Cabinet colour
Black

Width
246 mm

Height
238 mm

Depth
175 mm

Weight
7,9 kg

Weight11.50 kg6.50 kg6.00 kg2.60 kg5.50 kg8.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.50 kg
Weight 6.50 kg
Weight 6.00 kg
Weight 2.60 kg
Weight 5.50 kg
Weight 8.00 kg