Content |
• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• Very wide beam angle
• Runs pre-programmed shows from SD card
• Flightcase, ILDA cable & 1G SD card included
The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the new 200mW 638nm red laser, the visual brightness is around a 1.2W traditional RGB laser with 660nm red laser. It has beautiful clear colors created by these 3 separate laser-diodes, Red, Green and Blue with TTL modulation. The RGB850 can be controlled by DMX and has many built-in figures and patterns. It can project two built-in patterns at the same time. You can also create your own designs and shows with any kind of ILDA laser software. The RGB850 is equipped with a 20K scanner pair which makes faster and bigger projections possible with less flickering. For rental solutions you can use the SD card slot to run pre-programmed shows without any controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 68 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 850mW (200mW 638nm Red, 150mW 532nm Green, 500mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-60˚
Control Modes: Auto, Sound, Master/Slave, DMX, ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 335 x 240 x 165mm (excl. bracket)
Dimensions flightcase: 760 x 435 x 315mm
Weight: 11,5 kg
Accessories: 2 Keys, Interlock test connector, flightcase, ILDA cable, 2G SD card
|
JB Systems Lounge Laser DMX
Der JB Systems Lounge Laser DMX ist ein Effekt-Laser, der durch eine spezielle Rastertechnologie eine große Anzahl einzelner Laserstrahlen aufteilt, die in alle Richtungen zeigen und so einen verblüffenden, raumfüllenden Effekt erzeugen. Durch die Plug and Play-Funktion werden keine teuren Steuergeräte benötigt. Der JB Systems Lounge Laser DMX kann über die DMX-Steuerung (1 oder 7 Kanäle), Sound-to-Light und Master/Slave Betrieb laufen.
JB Systems Lounge Laser DMX:
- Effekt-Laser
- Betriebsmodi: DMX-Steuerung (1 oder 7 Kanäle), Standalone (musikgesteuert oder automatisch), Master/Slave-Funktion
- Spannungsversorgung: 230 V
- max. Leistung: 128 Watt
- CW Laser grün: 40 mW/532 nm
- CW Laser rot: 150 mW/650 nm
- LED Leistung: 5 Watt/blau
- Laserschutzklasse: 3B
- EN/IEC: N60825-1:1994 + A1:2002 + A2:2002 + COTT
- Maße: 8,6 x 23,3 x 17,6 cm
- Gewicht: 1,6 kg
|
Description - The best of both worlds: a traditional 2 color laser + laser burst effects combined in one unit!
- Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ,...
- Class 3B laser based on 40mW 532nm green + 200mW 450nm blue laser.
- The color of the beams changes all the time using laser blanking technology.
- Several working modes:
- DMX-control: 1channel for easy operation or 10 channels for full control
- Standalone: sound activated (internal mic) or automatic
- Master/slave: wonderful synchronized shows
- Optional CA-8 remote controller available
- Compatible with RF-DMX Converter:
* Set the Radiant laser to 1CH DMX-mode
* Set the RF-DMX Converter to MODE1 - Built-in microphone
- 3-digit LED display for easy menu navigation
- Optional CA-8 controller for additional functions available
- Key actuated on/off switch and emergency switch (interlock) input for additional safety
- Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information - Mains Input: AC 100~240V, 50/60Hz
- Fuse: 250V 1A slow blow (20mm glass)
- Total Power consumption: 30W
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 10 channels
- DMX starting address: 001 à 512
- Laser Power:
- 40mW Green CW laser (λ = 532nm)
- 200mW Blue CW laser (λ = 450nm)
- Laser radiation class: 3B
- Beam diameter @ aperture:
- Divergence (each beam)
- Divergence (total output)
- Working temperature: 15°C to 40°C
- Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
- Size: 25 x 24 x 19 cm
- Weight: 2,6kg
|
Cameo D FORCE 3000 RGB
- 3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
- Beam alignment without the need for servicing!
- Dust-proof aluminium casing for minimum maintenance
- 30 kpps high-speed galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precise beams with extremely low divergence for razor-sharp projections
- Interlock Out for sending the emergency switch-off signal
- Control via ILDA
- Scan Fail safety system
- Neutrik powerCON mains input and output
- Thermally activated fan for controlled operating temperature
- Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Laser sources
Laser diode
Scanner
30 kpps @ 8° ILDA
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Plug & play: no expensive controllers needed!
a multifunctional infrared remote can be used to control the functions
standalone mode with built-in microphone or automatic shows can be selected
all kinds of strobe effects
adjustable mounting bracket (stand) and power adapter included
key actuated on/off switch for additional safety
complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Details:
Mains Input: AC/DC Adapter 230V AC -> 12V / 600mA
Power consumption: 5,7W
Laser Power: 40mW green CW laser (532nm), 100mW red CW laser (650nm)
Laser radiation class: 3B Laser
Safety Standard: EN60825-1:1994 + A1:2002 + A2:2002 + COTT
Patters: like Micro Star Laser, plus more patter
Operating modes: standalone mode with built-in or automatic
Remote control: inluded
Dimensions: 117 x 92 x 46 mm
Weight: 0,54kg
|
RGB2w (Red500mw/638nm; Green: 500mw / 520nm; Blue:1000mw/450nm) 25kpps scanner ,LCD,SD,X/Y, RGB dimmer
Laser diode Laser power:2000mW
Color Balance:
Red>500mw/638nm ( 500mW/520nm OEM ( 1000mw/445 OEM ( |
Reviews
There are no reviews yet.