• Sealed Optics • DMX & ILDA control • 20K Scanner pair • Very wide beam angle • Runs pre-programmed shows from SD card • Flightcase, ILDA cable & 1G SD card included The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the […]
• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• Very wide beam angle
• Runs pre-programmed shows from SD card
• Flightcase, ILDA cable & 1G SD card included
The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the new 200mW 638nm red laser, the visual brightness is around a 1.2W traditional RGB laser with 660nm red laser. It has beautiful clear colors created by these 3 separate laser-diodes, Red, Green and Blue with TTL modulation. The RGB850 can be controlled by DMX and has many built-in figures and patterns. It can project two built-in patterns at the same time. You can also create your own designs and shows with any kind of ILDA laser software. The RGB850 is equipped with a 20K scanner pair which makes faster and bigger projections possible with less flickering. For rental solutions you can use the SD card slot to run pre-programmed shows without any controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area’s a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 68 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 850mW (200mW 638nm Red, 150mW 532nm Green, 500mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-60˚
Control Modes: Auto, Sound, Master/Slave, DMX, ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 335 x 240 x 165mm (excl. bracket)
Dimensions flightcase: 760 x 435 x 315mm
Weight: 11,5 kg
Accessories: 2 Keys, Interlock test connector, flightcase, ILDA cable, 2G SD card
Weight
11.50 kg
Reviews
There are no reviews yet.
Be the first to review “SHOWTEC 51329 Galactic RGB850 850mW Red/Green/Blue Laser, ILDA & DMX” Cancel reply
• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• Very wide beam angle
• Runs pre-programmed shows from SD card
• Flightcase, ILDA cable & 1G SD card included
The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the new 200mW 638nm red laser, the visual brightness is around a 1.2W traditional RGB laser with 660nm red laser. It has beautiful clear colors created by these 3 separate laser-diodes, Red, Green and Blue with TTL modulation. The RGB850 can be controlled by DMX and has many built-in figures and patterns. It can project two built-in patterns at the same time. You can also create your own designs and shows with any kind of ILDA laser software. The RGB850 is equipped with a 20K scanner pair which makes faster and bigger projections possible with less flickering. For rental solutions you can use the SD card slot to run pre-programmed shows without any controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 68 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 850mW (200mW 638nm Red, 150mW 532nm Green, 500mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-60˚
Control Modes: Auto, Sound, Master/Slave, DMX, ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 335 x 240 x 165mm (excl. bracket)
Dimensions flightcase: 760 x 435 x 315mm
Weight: 11,5 kg
Accessories: 2 Keys, Interlock test connector, flightcase, ILDA cable, 2G SD card
This first of a kind laser uses a 5W blue LED, mixed with red and green laser beams to create mesmerising plasma type effects best viewed on a flat surface, such as a wall or ceiling. The effect rotates and changes constantly, the speed of which can be controlled manually on the unit to suit the mood. This laser, unlike standard lasers, does not require smoke to create the best effects, making it the most unique and desirable product on the market.
* Unique rotating plasma pattern effect (best viewed without smoke)
* Create a thunderstorm effect by manually controlling red and green strobe times and brightness of the blue LED
* 100mW red and 40mW green lasers
* 5W blue LED
* Manually control speed, brightness and strobe
* 3 modes of operation: Manual, Auto and Sound to light
* We recommend that this product is used within the guidelines HSG95
* Key controlled for laser emission safety
Fantastic laserburst effect using a 650nm 1000mW red and a 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 100mW Red CW laser (λ = 650nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg
Name:Pure diode RGB5000 laser light
Laser power:5000mW
Color Blance:
Red>1000mw/638nm (
Green>1200mW/520nm OEM ( 3000mw/445 OEM (
With a strong output of 1,000 mW and red, green and blue color mixes the IODA 1000 RGB features diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1.5 mrad only. The red 638 nm diode achieves a significantly better visibility than a conventional 650 nm diode and makes the IODA 1000 RGB the ideal choice for highly professional laser shows.
With analog modulation for up to 16 million colour hues the Ioda Series professional show lasers generate stunning graphics projections with razor-sharp beams. Their dust proof dual layer aluminium enclosures separate the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. All Ioda laser lights sport high speed 30 Kpps scanners 8 degrees ILDA, a 60° scan angle and 128 impressive pattern presets. They provide an ILDA interface on 25-pin D-sub connectors for computer control, DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. They are also capable of master, slave and standalone operation, and the low noise fan keeps the compact units cool and quiet. They feature 3-pin DMX connectors, Neutrik powerCON mains inputs and outputs plus a key switch to prevent unauthorized use. For audience safety Ioda laser lights are equipped with a "Scan Fail Safety" system.
Note: Sharing identical presets, the Ioda lasers are compatible with the Luke series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
Item number:CLLIODA1000RGB
Product type: LASER
Total power: 1000 mW
Colour spectrum: RGB
Wavelength(s): 638 nm, 532 nm, 447 nm
Beam Data: approx. 3 mm / 1.5 mrad divergence
Laser sources: Laser diode & DPSS
Laser class: 4
Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
Max. scan angle: 60 degrees
Operating modes: ILDA, DMX-512, Auto, Sound Control
DMX input: 3-pin XLR
DMX output: 3-pin XLR
ILDA input: 25-pin Sub-D male
ILDA output: 25-pin Sub-D female
DMX mode: 4-channel, 12-channel
Controls: Mode, Enter, Value Down, Value Up
Display elements: LC display
Power supply: AC 100-240 V / 50-60 Hz
Power consumption: 100 W
Power connector: Neutrik PowerCon
Housing Material: aluminium
Housing colour: black
Dimensions (WxDxH): 188 mm x 201 mm x 210 mm (excluding bracket)
Cameo D FORCE 3000 RGB
3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
Beam alignment without the need for servicing!
Dust-proof aluminium casing for minimum maintenance
30 kpps high-speed galvo scanner @ 8° ILDA
Analogue modulation for up to 16 million colour shades
Precise beams with extremely low divergence for razor-sharp projections
Interlock Out for sending the emergency switch-off signal
Control via ILDA
Scan Fail safety system
Neutrik powerCON mains input and output
Thermally activated fan for controlled operating temperature
Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.