Content |
• IR remote control included
• 32 Patterns and built-in shows
• 180mW Red, Blue and Purple colors
• Master / Slave possibility with other value line units
The RBP-180 is the successor of the RVP-250. Because of the change from violet into blue laser it creates the colors more intense and gives a better output. Another addition is the Ir remote controller that gives you the possibility to control the laser without DMX. The multicolor lasers from Galactic Value Line can function as a Master for the single color laser when they are used in Master / Slave mode. All Multicolor lasers from the Galactic Value Line have the same personality which has 10 DMX channels and 32 different patterns.
The Galactic Value Line is a family of compact lasers with the same functionalities but different colors. These 5 new models of the value line series are equipped with an IR remote and updated with more bright and better color combinations. They all have the same control modes and programs. This makes it easy to create a versatile laser-show with different units. The Galactic Value line has one auto and one sound to light program integrated and they can be selected manually or by DMX. In DMX mode you also have total control of all Patterns, X-Y movements, zooming, speed and rotation. All Galactic value line models are equipped with optimized optics for the best laser performance.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
The Galactic value line makes it possible to create a cost effective professional laser-show with one or multiple units.
Compatible Galactic Value line MKII series:
• 51333 G40, Green 40mW
• 51334 B400, Blue 400mW
• 51335 RGY-140, Red Green Yellow 140mW
• 51336 GBC-120, Green, Blue, Cyan 120mW
• 51337 RBP-180, Red, Blue, Purple 180mW
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 16 Watt
Laser Color: Red, Blue , Purple
Laser Power: 180mW (100mW 650nm Red, 80mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 3B
Scan Speed: Stepping motor
Scan Angle: +/-30˚
Control Modes: Auto, Sound, Master/Slave, DMX
Control Display: 4 Digits LED
DMX Channels: 10
Data Connector: In/Out (XLR 3Pin)
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 145 x 160 x 80mm (excl. bracket)
Weight: 1.3Kg
Accessories: IR remote, 2 Keys, Interlock test connector
|
Description - A compact but very effective 40mW green class 3B laser.
- Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ, …
- Several working modes:
- DMX-control: 1channel for easy operation or 8 channels for full control.
- Standalone: sound activated (internal mic) or automatic.
- IR-remote: infrared remote control.
- Master/slave: wonderful synchronized shows.
- Built-in microphone
- 3-digit LED display for easy menu navigation
- Key actuated on/off switch and emergency switch (interlock) input for additional safety
- Complies to EN/IEC 60825-1 2007 for Laser Safety
Technical Information - Mains Input: AC 100~240V, 50/60Hz
- Fuse: 250V 1A slow blow (20mm glass)
- Total Power consumption: 12W
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 8 channels
- DMX starting address: 001 à 505
- Laser Power: 40mW Green CW laser (λ = 532nm)
- Laser radiation class: 3B
- Beam diameter @ aperture: less than 5mm
- Divergence (each beam): less than 2 mrad
- Divergence (total output): less than 90°
- Working temperature: 10°C to 40°C
- Laser Safety Standard: EN/IEC 60825-1 2007
- Size: 145x160x80mm
- Weight: 1.3kg
|
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
ILDA extension cable incl. screw lock 3 m
Product type
Laser Accessories
Connector 1
25-pin Sub-D male
Connector 2
25-pin Sub-D female
Colour
Black
Length
300 mm
Weight
0,24 kg
Features
incl. screw lock
|
Fantastic laserburst effect using a 650nm 1000mW red and a 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 100mW Red CW laser (λ = 650nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg |
Laser power |
10000mw |
Color Balance |
Green>10000mW/520nm OEM ( |
|
Reviews
There are no reviews yet.