| Content |
• IR remote control included
• 32 Patterns and built-in shows
• 180mW Red, Blue and Purple colors
• Master / Slave possibility with other value line units
The RBP-180 is the successor of the RVP-250. Because of the change from violet into blue laser it creates the colors more intense and gives a better output. Another addition is the Ir remote controller that gives you the possibility to control the laser without DMX. The multicolor lasers from Galactic Value Line can function as a Master for the single color laser when they are used in Master / Slave mode. All Multicolor lasers from the Galactic Value Line have the same personality which has 10 DMX channels and 32 different patterns.
The Galactic Value Line is a family of compact lasers with the same functionalities but different colors. These 5 new models of the value line series are equipped with an IR remote and updated with more bright and better color combinations. They all have the same control modes and programs. This makes it easy to create a versatile laser-show with different units. The Galactic Value line has one auto and one sound to light program integrated and they can be selected manually or by DMX. In DMX mode you also have total control of all Patterns, X-Y movements, zooming, speed and rotation. All Galactic value line models are equipped with optimized optics for the best laser performance.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
The Galactic value line makes it possible to create a cost effective professional laser-show with one or multiple units.
Compatible Galactic Value line MKII series:
• 51333 G40, Green 40mW
• 51334 B400, Blue 400mW
• 51335 RGY-140, Red Green Yellow 140mW
• 51336 GBC-120, Green, Blue, Cyan 120mW
• 51337 RBP-180, Red, Blue, Purple 180mW
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 16 Watt
Laser Color: Red, Blue , Purple
Laser Power: 180mW (100mW 650nm Red, 80mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 3B
Scan Speed: Stepping motor
Scan Angle: +/-30˚
Control Modes: Auto, Sound, Master/Slave, DMX
Control Display: 4 Digits LED
DMX Channels: 10
Data Connector: In/Out (XLR 3Pin)
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 145 x 160 x 80mm (excl. bracket)
Weight: 1.3Kg
Accessories: IR remote, 2 Keys, Interlock test connector
|
This first of a kind laser uses a 5W blue LED, mixed with red and green laser beams to create mesmerising plasma type effects best viewed on a flat surface, such as a wall or ceiling. The effect rotates and changes constantly, the speed of which can be controlled manually on the unit to suit the mood. This laser, unlike standard lasers, does not require smoke to create the best effects, making it the most unique and desirable product on the market.
* Unique rotating plasma pattern effect (best viewed without smoke)
* Create a thunderstorm effect by manually controlling red and green strobe times and brightness of the blue LED
* 100mW red and 40mW green lasers
* 5W blue LED
* Manually control speed, brightness and strobe
* 3 modes of operation: Manual, Auto and Sound to light
* We recommend that this product is used within the guidelines HSG95
* Key controlled for laser emission safety
|
RGB1w (Red300mw/638nm; Green: 150mw / 532nm; Blue:600mw/440nm) 25kpps scanner ,LCD,SD,X/Y, RGB dimmer
Laser diode Laser power:2000mW
Color Balance:
Red>150mw/638nm ( 150mW/532nm OEM ( 600mw/445 OEM ( |
- Animation laser with high speed 5 Kpps stepper motor
- 60° scan angle
- Precision beams with minimum divergence
- 32 pattern presets
- DMX, sound and infrared control plus auto function
- Master, slave and standalone modes
- Display with 4 function keys for easy manual operation
- Rugged aluminium enclosure with key switch
- Includes handheld infrared remote
Projecting animations with red, green and blue color mixes the WOOKIE 400 RGB delivers an output of 400 mW from 3 mm beam diameter diode and DPSS lasers with no more than 2 mrad divergence.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Wavelength
447 nm , 532 nm , 650 nm
Beam Data
approx. 3 mm / 2 mrad divergence
Laser sources
DPSS , Laser diode
Scanner
High speed stepper motors, 5 kpps
Operating modes
Auto programs , DMX 512 protocol , sound control
DMX output
XLR 3-pin female
DMX mode
3-channel , 9-channel
Controls
Enter , Mode , Value Down , Value Up
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power connector
IEC power connector male
Weight
2 kg
|
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Description - The best of both worlds: a traditional 2 color laser + laser burst effects combined in one unit!
- Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ,...
- Class 3B laser based on 40mW 532nm green + 200mW 450nm blue laser.
- The color of the beams changes all the time using laser blanking technology.
- Several working modes:
- DMX-control: 1channel for easy operation or 10 channels for full control
- Standalone: sound activated (internal mic) or automatic
- Master/slave: wonderful synchronized shows
- Optional CA-8 remote controller available
- Compatible with RF-DMX Converter:
* Set the Radiant laser to 1CH DMX-mode
* Set the RF-DMX Converter to MODE1
- Built-in microphone
- 3-digit LED display for easy menu navigation
- Optional CA-8 controller for additional functions available
- Key actuated on/off switch and emergency switch (interlock) input for additional safety
- Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information - Mains Input: AC 100~240V, 50/60Hz
- Fuse: 250V 1A slow blow (20mm glass)
- Total Power consumption: 30W
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 10 channels
- DMX starting address: 001 à 512
- Laser Power:
- 40mW Green CW laser (λ = 532nm)
- 200mW Blue CW laser (λ = 450nm)
- Laser radiation class: 3B
- Beam diameter @ aperture:
- Divergence (each beam)
- Divergence (total output)
- Working temperature: 15°C to 40°C
- Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
- Size: 25 x 24 x 19 cm
- Weight: 2,6kg
|
Reviews
There are no reviews yet.