| Content |
• 5 Laser effects in one unit
• DMX & ILDA Control
• 620mW RGB laser with TTL modulation
• Moodbeam, Burst, Polar, 3D & Scanned beam FX
The Galactic FX RGB-620 is a 5-in1 FX 620mW RGB laser unit. It has an extra fx wheel in front of the scanner pair that creates Moodbeam, Burst, Polar, 3D and Scanned beam effects. Check the online video to see all the possibilities of this special galactic laser. It can be controlled by DMX with 19 channels or ILDA. When you use ILDA you have to connect a DMX controller (2 channels) to control the effects wheel because ILDA doesn't support extra controls besides scanner pairs and laser modulation. If you like to operate it without controller you can use the 6 built in programs which can play automatic or sound activated. It also has a slave mode for a set up with multiple units. All built in programs are also selectable by DMX. In DMX mode you also have many possibilities to control the 80 built in patterns like color, clipping, zooming, X-roll, Y-Roll, Z-Roll, X-move, Y-move and applying effects.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 40 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 620mW (120mW 638nm Red, 100mW 532nm Green, 400mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 25K
Scan Angle: +/-20˚
Control Modes: Auto, Sound, Master/Slave, DMX
Control Display: 4 Digits LED
DMX Channels: 19
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 290 x 240 x 110mm (excl. bracket)
Weight: 4,5Kg
Accessories: 2 Keys, Interlock test connector
|
| Laser power |
10000mw |
| Color Balance |
Green>10000mW/520nm OEM ( |
|
Work LX 80G DMX Laser
LX 80G is a high performance features with 80 mW and high precision micro-step scan motors
controlled by high speed processor.
It can be controlled by DMX signal with 7 channels or autonomous through its pre-recorder programs
being able to synchronize more than one LX 80 G (up to 100 units)
The program can be operated with audio signal thanks to the built-in microphone. The effects capacity
is enormous with up to 200 available effects that allow a great combinations variety and the TTL ?blanking?
function, very useful in discotheque and club performances. It is also possible to control PAN/TILT
movements via DMX making a versatile set. The 80 mW REAL power diode is very effective, creating
a powerful beam.
Device: Green Laser.
> Laser Source: 30mW @ 532nm.
> Scan: High precission micro-step motors
precisi?n.
> Control: High capacity processor.
> Operating modes: DMX512, Autonomous, Audio.
> aster/Slave function con linking capacity up to 100 units.
> Effects: 200 effects.
> Supply: 220V AC 50Hz
> Dimensions (mm): 250 x 230 x 190
(L x W x H).
> Weight:3.8 kg.
| Sporting diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1 mrad only the WOOKIE 200 RGY provides red, green and yellow colors and 200 mW output.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
- Item number: CLLWOOKIE200RGY
- Product type: LASER
- Total power: 200 mW
- Colour spectrum: RGY
- Wavelength(s): 650nm, 532nm
- Beam Data: approx. 3 mm / 1 mrad divergence
- Laser sources: Laser diode
- Laser class: 3B
- Scanner: High speed stepper motors, 5 kpps
- Max. scan angle: 60 degrees
- Operating modes: DMX-512, Auto, Sound Control
- DMX input: 3-pin XLR
- DMX output: 3-pin XLR
- DMX mode: 3-channel, 9-channel
- Controls: Mode, Enter, Value Down, Value Up
- Display elements: LED display
- Power supply: AC 100-240 V / 50-60 Hz
- Power consumption: 50 W
- Power connector: IEC power socket male
- Housing Material: metal
- Housing colour: black
- Dimensions (WxDxH): 180 x 90 x 192 mm (excluding bracket)
|
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
| Sporting diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1.5 mrad only the LLUKE 1000RGB delivers an output 1,000 mW and red, green and blue color mixes. The red 638 nm diode achieves a significantly better visibility than a conventional 650 nm diode and makes the LUKE 1000 RGB the ideal choice for highly professional laser shows..
The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.
Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
- Item number: CLLLUKE1000RGB
- Product type: LASER
- Total power: 1000 mW
- Colour spectrum: RGB
- Wavelength(s): 638 nm, 532 nm, 447 nm
- Beam Data: approx. 3 mm / 1,5 mrad divergence
- Laser sources: Laser diode & DPSS
- Laser class: 4
- Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
- Max. scan angle: 60 degrees
- Operating modes: ILDA, DMX-512, Auto, Sound Control
- DMX input: 3-Pin XLR
- DMX output: 3-Pin XLR
- ILDA input: 25-pin Sub-D male
- ILDA output: 25-pin Sub-D female
- DMX mode: 4-channel, 12-channel
- Controls: Mode, Enter, Value Down, Value Up
- Display elements: LC display
- Power supply: AC 100-240 V / 50-60 Hz
- Power consumption: 100 W
- Power connector: Neutrik PowerCon
- Housing Material: aluminium
- Housing colour: black
- Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
|
Reviews
There are no reviews yet.