| Content |
• Large tube diameter
• Self-cleaning function
• Neutrik Powercon
• 3 & 5P DMX connections
The Antari F-1 Fazer is the successor of the X-310 and equipped with advanced technology and features from the F-Series family.
The air pump system enhances a smooth mixture of fog liquid and air to produce fine, dry fog with minimal fluid consumption. It also enables the machine with a self-cleaning function to extend the lifespan of heater elements. The F-1 is also available with a Wireless DMX module from Wireless Solutions Sweden.
The Antari F-1 is the successor of the X-310 Fazer. The F-1 is upgraded in design but also equipped with the latest technology
The improved air pump system creates a smooth mixture of fog liquid and air to produce fine, dry fog with minimal fluid consumption. The F-1 also has a self-cleaning function to extend the life time of the heater element. It can be used manually but also by DMX in three different modes:
1CH, Fog volume with 100% fan
2Ch, Separate fog and fan volume
1Ch, Fog and fan sync mode
The Antari F-1 has 3p and 5p DMX connections and also available with or without built-in WDMX module.
Specifications Input voltage: 100-240VAC, 50/60Hz
Power Consumption: 700W
Initial Heat-Up Time: 5 min.
Fluid Consumption Rate: 8.5 ml/ min
Tank Capacity: 2.4 litre
Control Options: On-Board Control Panel, DMX
DMX Channels: 1,2
DMX Connections: DMX 3+5 pin XLR、
Power connection: Neutrik PowerCon
Weight: 14.1 Kg
Dimensions (mm): 608 x 2 75 x 286
|
Jem Air Force 1 Fan speed 0 – 2500 rpm 1600 cubic m/hr. Single channel DMX operation. Analogue link sockets. Floor standing or truss mounting. Low voltage multifunctional Remote control. Sealed fan motor. Converts smoke to haze, Wind effects. Projects smoke down long lengths of ducting. Keeps equipment cool: Amp racks, Dimmer racks.
|
Digital technology and a new Design
The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.
Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.
Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany
Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
110 V / 60 Hz
Warm up time approx. 7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
. 35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at
Control: DMX 512
0 ? 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg
|
The ZR33 Hi-Mass is a powerful and instant atmosphere generator for large clubs, stage productions, rental companies and industrial applications.
* Continuous output
* 1000 m³/min fog output
* 1500 W heat exchanger
* 8 min heat-up time
* Floor standing or truss mounting
* 9.5 liter fluid capacity
* Different fluid options for different applications
* Low fluid sensing
* Onboard DMX
* On-board control panel
* Removable panel for remote control
* Multifunctional remote control
|
The Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense "white-out" of fog.
* Output and density level control
* Continuous output
* 5000 m³/min fog output
* Integrated high velocity fan
* 2 x 2500 W heat exchanger
* 18 min heat-up time
* For vertical or horizontal effect projection
* 2 x 9.5 liter fluid capacity
* Different fluid options for different applications
* Low fluid sensing
* Onboard DMX
* On-board control panel
* Optional hand-held remote control
|
Martin JEM CLUB SMOKE Machine - Remote Control
|
Reviews
There are no reviews yet.