• On board WDMX Sweden
The Antari F-1 Fazer is the successor of the X-310 and equipped with advanced technology and features from the F-Series family.
• Self-cleaning function
• Neutrik Powercon
• 3 & 5P DMX connections
The air pump system enhances a smooth mixture of fog liquid and air to produce fine, dry fog with minimal fluid consumption. It also enables the machine with a self-cleaning function to extend the lifespan of heater elements. The F-1 is also available without Wireless DMX module.
The Antari F-1 is the successor of the X-310 Fazer. The F-1 is upgraded in design but also equipped with the latest technology
Specifications Input voltage: 100-240VAC, 50/60Hz
The improved air pump system creates a smooth mixture of fog liquid and air to produce fine, dry fog with minimal fluid consumption. The F-1 also has a self-cleaning function to extend the life time of the heater element. It can be used manually but also by DMX in three different modes:
1CH, Fog volume with 100% fan
2Ch, Separate fog and fan volume
1Ch, Fog and fan sync mode
The Antari F-1 has 3p and 5p DMX connections and also available with or without built-in WDMX module.
Power Consumption: 700W
Initial Heat-Up Time: 5 min.
Fluid Consumption Rate: 8.5 ml/ min
Tank Capacity: 2.4 litre
Control Options: On-Board Control Panel, DMX, WDMX
DMX Channels: 1,2
DMX Connections: DMX 3+5 pin XLR
Power connection: Neutrik PowerCon
Weight: 14.1 Kg
Dimensions (mm): 608 x 2 75 x 286
Power: AC240V, 50 Hz
Output: 10,000 cu. ft/min (283m³/min)
Tank capacity: 1,7 L
Fluid type: Fog Fluid
Fluid consumption Rate: 49 Min./L) (100% Output)
Weight: 6,6 kg
Dimensions (LxWxH): 433 x 198 x 151 mm
Remote: Z-10 (included)
Cable Length: 10 m
Connector remote: 6,3 mm Stereo Jack
Connector DMX: 3-pin XLR in-out
Function: Toggle Switch
Compatible With: Z-800II, Z-1000II, Z-1020
Z-40 Timer Remote control: Ordernr: 60690
Z-50 Wireless Remote control: Ordernr: 60678
JEM Air Force 2, The AF-2 is a high output fully DMX (3 + 5 pin) controllable fan. It has been designed with theme parks, stage applications and theatres in mind. With its massive power it easily projects smoke over long distances, works as a wind effect or simply converts smoke or fog into haze. Very high output, Fan speed 0 - 1,380rpm, Airflow: 6,500m³/h, Fan casing constructed from aluminum sheet for minimal weight, only 17kg!, 3 & 5 pin DMX as standard, Multifunctional controller, Very high quality sealed fan motor designed to withstand high condensation levels associated with close proximity fog, Aluminum hanging bracket allowing 360° rotation, compatible with the Omega clamp system.
Digital technology and a new Design
The viper 2.6 is a very powerful fog generator. It unites the current digital technology
with proven technique and power.
Very powerful output, simple handling and the possibility to connect an external fan
are the main new features of this machine.
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also
protects the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output
can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest
fog can be produced. This enables the viper 2.6 to be used in both small and large locations.
? DMX 512 as standard
The viper 2.6 can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
If an external fan is connected to the machine it can be controlled via DMX as well.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-
remote (option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine.
A short press at the start button makes the machine run. Therefore a permanent pressing
of the start button is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.
? Connector for external fan
An external fan with max. 800 watts can be connected to the viper 2.6.
The viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke
complete with a collecting tray for fluid drips can be fixed.
The following Look-fluids are available for the viper 2.6:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
? DMX as standard, analog and stand-alone-mode
? Internal timer
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Very powerful output
? Connector for external fan up to 800 Watt
? Made in Germany
Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230 V / 50 Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output
at continuous output: 240 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 15 m
Fogging time at
external Fan: max. 800 Watt
Air quantity adjustable in 99 steps
Control: DMX 512
0 ? 10 V analog
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Dimensions (L x W x H): 520 x 230 x 250 mm
Weight without bottle: approx. 12 kg
The ZR33 Hi-Mass is a powerful and instant atmosphere generator for large clubs, stage productions, rental companies and industrial applications.
* Continuous output
* 1000 m³/min fog output
* 1500 W heat exchanger
* 8 min heat-up time
* Floor standing or truss mounting
* 9.5 liter fluid capacity
* Different fluid options for different applications
* Low fluid sensing
* Onboard DMX
* On-board control panel
* Removable panel for remote control
* Multifunctional remote control
MDG MAX 3000 APS Smoke Machine 715W
Extremely powerful,adjustable fog output
Virtually noiseless, with the finest fog and the longest hanging times
Automatic Purging System (APS) to prevent build-up and clogging
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included
Powerful fog output (up to 85 m3/3,000 ft3 per minute)
Maximum fog output 85 m3 (3,000 ft3)
Fluid consumption 1 L (34 oz)
per hour at 2.76 bar (40 psi)
Gas type CO2 or N2
Gas consumption 0.97 kg (2.13 lb)
per hour at 2.76 bar (40 psi)
Reservoir capacity 2.5 L (0.66 US gallon)
Automatic Purging Standard feature
Fog colour Pure white
Particle size 0.5-0.7 microns
Warm-up time (maximum) 8 minutes
Fluid type MDG Neutral Fluid
(M.S.D.S. available on request)
Operating voltage 115 or 230 VAC,
Power consumption 715 W
Dimensions Length 61 cm (24?)
Width 18 cm (7?)
Height 30 cm (12?)
Weight 20 kg (43 lb)
Shipping weight 33 kg (72 lb)
(with flight case)
Approval CE approved, CSA
and UL pending