| Content |
• Wireless Remote included
• On board WDMX Wireless Solutions Sweden
• PowerCON input
• Rugged housing
• Continous output
The W-Series Stage Foggers from Antari are designed to meet the rigorous demands of stage and touring ideal to be used for very large venues, outdoor events, movie production and many other applications. The precision lies with optoelectronic liquid sensor (OPTO). When sensing there's insufficient liquid, the pump will stop working, and the production of fog will be ceased until it senses the re-filling of the liquid again. An LCD digital control module is equipped to the W-Series, allowing the users to set the volume control, timer control, and DMX functions to precision.
Antari's W-Series transforms digital wireless control of stage effect machine navigation into a simple, natural control of the hand and fingers. This premium-performance series is specially upgraded for professional users who demand true –Plug-In and Play" operation for stage fog machines. All the unnecessary wires are eliminated leaving you a transmitting controller in your hand to send out the commands.
The innovative smart-intelligence lies with the learning-mode of the wireless function. The receiver can memorize up to 5 sets of frequencies and can receive signals from any registered transmitter. Besides the included wireless control it is also equipped with on board Wireless DMX from Wireless Solutions Sweden.
A square, durable housing design that gives the W series a refined look and eases transport. The design offers protection against stray water or spilled drinks. There are two professional versions: W-515 (1500W) and W-530 (3000W).
Specifications Power supply: 230/240 VAC, 50/60 Hz
Heater: 3000 Watt
Output: 40.000 cu. ft/min
First heat up time: 12 min.
Tank capacity: 6 L
Fluid consumption rate: 180ml/min
Control: DMX, Manual, Wireless Remote, WDMX
Control parameters: Timer, Volume
DMX Connectors: XLR 3&5p
DMX Channels: 1
Included remote: W-1
Remote frequency: 433.92/315 Mhz
Remote battery: 12V, type 27A
Dimensions: 581 x 278 x 186mm (LxWxH)
Weight: 19 kg
| The party smoke-machine
* Ideal for party-rooms or small discotheques
* Powerful output
* With ON/OFF remote control
* Remote-control connection via 3-pin IEC-socket
* With mounting-bracket
* Quality thermostat
* Overheat protective switch
SPECIFATIONS
Power supply: 230 V AC, 50 Hz ~
Power consumption: 700 W
Smoke-output: approx. 2.5 m
Warm-up time: approx. 5 min.
Fluid consumption: approx. 90 ml/min.
Output volume: approx. 90 m?/min.
Tank capacity: 1 l
Dimensions (LxWxH): 325 x 235 x 230 mm
Weight: 3.5 kg |
Jem Air Force 1 Fan speed 0 – 2500 rpm 1600 cubic m/hr. Single channel DMX operation. Analogue link sockets. Floor standing or truss mounting. Low voltage multifunctional Remote control. Sealed fan motor. Converts smoke to haze, Wind effects. Projects smoke down long lengths of ducting. Keeps equipment cool: Amp racks, Dimmer racks.
|
- Fog machine for small party rooms
- On/off cable remote control
- Mounting bracket
- Overheat protection
- Fluid level indication
- Smoke-output: ca. 2 m
- Control: Wired remote control provided
- Power supply of device: Fix fehlt
Technical specifications
| Power supply: |
230 V AC, 50 Hz |
| Smoke-output: |
2 m |
| Warm-up time: |
5 min. |
| Output volume: |
14 m³/min. |
| Tank capacity: |
0.3 l |
| Dimensions (L x W x H): |
265 x 145 x 170 mm |
| Weight: |
2,5 kg |
| Power consumption: |
400 W |
| Fluid consumption: |
ca. 21 - |
| IP classification: |
IP20 |
| Color: |
Silver |
| Height: |
17 cm |
| Depth: |
26,5 cm |
| Width: |
14,5 cm |
Packaging units
| PU |
EAN |
Weight |
Dimensions |
| 1 |
4026397578775 |
2,06 kg |
29cm x 15cm x 15cm |
|
S-100-II Remote Control SC-2
Antari Fogger accessories.
|
Digital technology and a new Design
The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.
Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.
Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany
Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
110 V / 60 Hz
Warm up time approx. 7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
. 35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at
Control: DMX 512
0 ? 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg
|
Reviews
There are no reviews yet.