| Content | Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) |
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don\'t need a clavilux, just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes. As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Product type Type Material Surface Color Fitting Length Stud spacing Max. load capacity Weight | The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberized T-Joint – making the T-Bar not only easier to handle and carry but also look better looking than regular stands.
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
Steel
Truss material
Steel
Stand surface
Powder coated
Crossbar surface
Powder coated
Stand colour
Black
Number of extensions
2
Min. height
1450 mm
Max height
3250 mm
Transport length
1450 mm
Max. load
50 kg
Holding fixture for TV Spigot
Yes
TV spigot
28 mm
Crossbar length
1220 mm
Weight
9,2 kg |
- Light aluminium crossbeam
- Highly robust flange
- Quick-release clamp for safe installation in no time at all
This universal crossbeam quickly converts stands with a 35 mm tube diameter into a light stand. It is made with light but robust aluminium and is quickly and securely mounted thanks to its robust flange with fast-closing
Product type
Stands and Tripod Accessories
Type
Lighting Stands
Fitting
36 mm clamp
Material
die-cast aluminium
Surface
Powder coated
Colour
Black
Length
1235 mm
Max. load capacity
50 kg
Weight
1,673 kg
| The SWU400T is an affordable lighting stand that features convenient height adjustment by means of a hand crank. Thanks to its high load bearing capacity of 85 kg, the removable crossbar, and the upper tube with a diameter of 35 mm, the SWU400T is also suitable for use as a speaker stand.
The sturdy steel construction has a black powder-coated finish; the upper tube and extensions are galvanized. A levelling foot ensures secure positioning of the wind up stand even on uneven surfaces. All adjustable elements are secured with spring bolts in addition to the tommy screws. The SWU400T weighs 19.7 kg and is extendable from a minimum height of 190.5 cm to a maximum of 4m.
Stand surface
galvanized, Powder coated
Crossbar surface
Powder coated
Stand colour
galvanized, silver
Holding fixture for TV Spigot
no
Additional information
incl. crossbar, TÜV-certified
| Get the most out of your speakers and shine your lights from above - put them up on a stand. Providing firm support, the SLS 315 B has a braced tripod base and twin extensions for a maximum height of 3.1 m. This dual purpose speaker and lighting stand features a rugged all-steel construction with unbreakable plastic parts and 30 kg load capacity.
Adam Hall Stands SLS315B
Professional Speaker and Lighting Stand
- Rugged all-steel construction and unbreakable plastic parts
- Braced legs for high stability
- Twin extensions
- Set screw and safety pin height adjustment
- 30 kg load capacity
Product type
Stands and Tripods
Stand surface
Powder coated
Height adjustment
Clamp with safety pin
Material of height adjustment
Steel
|
Reviews
There are no reviews yet.