Electrical Specifications and Connections Rated Current (A) 16 A Flashover Voltage 250 V Pins 3 Minimum Wire Size 0.75 mm² Maximum Wire Size 1.5 mm² Mechanical Specifications Length (mm) 50 mm Height (mm) 65 mm Width (mm) 5 mm Mounting Size 50 x 50 mm Weight 0.06 kg IP Rating IP44 Housing Plastic Colour Blue […]
Electrical Specifications and Connections
Rated Current (A) 16 A
Flashover Voltage 250 V
Pins 3
Minimum Wire Size 0.75 mm²
Maximum Wire Size 1.5 mm²
Mechanical Specifications
Length (mm) 50 mm
Height (mm) 65 mm
Width (mm) 5 mm
Mounting Size 50 x 50 mm
Weight 0.06 kg
IP Rating IP44
Housing Plastic
Colour Blue
Product Properties
Pin Connection Screw Terminal
Contact Type Brass
PDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19" powerdistributor (240V) for use in equipment-and effect-rack.
It has 8 IEC outputs which can be switched by the switch on the front of the unit.
Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control the voltage and current at any time in order to maximise the protection of your equipment. 240 Volt
8 IEC Outputs
This is a 63A three-phase power splitter with 3x 63A/400V input and 4 CEE 3x 32A/400V output.
Each output is protected by a 32A multi9 circuit breaker and each phase can be read out by a
4-digit voltimeter as well as 4-digit ammeter. Furthermore, a residual current circuit breacker is
used for protection against electronic shock under fault conditions.
Technical Drawing - 87470 [107,0 KB]
Professional compact mains distribution unit with four Schuko mains.
Built in a stable aluminium housing
30 cm length (not 19“)
The wider distance between the outlets allows using power adaptors side by side.
Four possible mounting positions because of replaceable mounting clips.
For mounting e.g. on the back wall or sidewalls inside of racks or on any other surface with screws (not included).
Length of cable: 2 m
Cross section of the inner conducters: 3 x 1,5mm²
16 A / 250V AC
Work LP-12S Controller
12 channels driver of 1.000 W. by channel with total load 6.000 W. Dimensions: 483 x 44 x 23 mm. Weight: 1,2 kgs.
This is a 16 A three-phase power splitter with 1 PCE 3x 16A/400V input and 6 Schuko 16A output.
Each phase output(2 Schuko, 16A) is protected by a 16A circuit breaker and can be read out by a
4-digit voltmeter as well as 4-digit ammeter. Additionally, a protected Schuko is provided for plugging
in power.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.