| Content | The MX1BP is a battery-powered preamplifier designed to be used with Microflex? or other condenser microphones. It allows use of these microphones in situations where phantom power is not available. Features * 4-pin Tini Q-G? connector allows use with a variety of condenser microphones * Power LED Indicator indicates power status to the preamplifier * Mute/On switch attenuates microphone without turning off preamplifier * Belt clip allows mobility while using lavalier and headset microphones * Preamplifier operates on 9 V battery or phantom power * Features 3.7 m (12 ft) cord with attached male XLR connector |
The Radial SB-48 is a high performance phantom power generator that employs a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct boxes and condenser microphones. The stereo design features XLR inputs and outputs with a choice of 48V and 12V operation. The SB-48 is powered by a single 15VDC 400 milliamp supply that is included. The connector may be locked into place using a retention clamp. As with all Radial products, the SB-48 is manufactured in Canada from solid steel and powder coated for years of great looks! |
The K6 powering module is the heart of this Sennheiser professional modular
microphone system and can be powered either by its internal 'AA' size 1.5 V
battery or by 12 - 48 V phantom power. The K6 can be combined with different
condenser microphone heads to provide a wide variety of polar patterns. Matt
black, anodised scratch-resistant finish.
Profile
Powering module for battery/phantom powering with switchable roll-off filter, battery
on/off switch with battery test. Suitable for ME 62 - ME 67 microphone heads and
-60 versions of MKE microphones.Transmission factor 0 dB at 1 kHz, nominal
impedance 200 Ohm, min. terminating impedance 1 kOhm, max. output voltage 2 V
(at 1 kHz), power supply: phantom powering 12 - 48 V or 1.5 V (AA size)alkaline
battery, supply current 2.2 mA, battery life approx. 150 h, dimensions in mm:
? 22 x 155, resultant length 94 mm, weight approx. 45 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch with battery test
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6 powering module
1 MZQ 200 microphone clamp
1 AA battery
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm
Min. terminating impedance 1000 Ohm
Output voltage 2 V
Power supply Phantom 12 - 48 V 1x Typ IEC LR 06
Current consumption 2,2 mA
Operating time (Battery) max. 150 h
Dimensions d 22 x 94 mm (netto)
Weight ca. 45 g
Gain 0 dB
| Adam Hall Connectors 4 STAR A JF3 MM3 Adapter 6.3 mm jack stereo female to 3.5 mm jack stereo male
Our adapter series consists of little helpers and some "must-have's", like the 4 STAR A JF3 MM3. With this adapter you can change a 6.3 mm jack plug to a 3.5 mm minijack. Some earphones use 6.3 mm jack plugs, but some computers only have minijack socket. Here is your solution.
Product type
Plugs and Connectors
Gender of connector 1
female
Gender of connector 2
male
| PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC，2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89")
Weight: 245 g
Packaging: white box | Alctron PS200 Portable 48V Phantom Power Supply for Condenser Microphone Live Broadcast Mic Power Supply
The PS200 is portable, battery-operated, and designed to provide 48V phantom power to any condenser microphone in remote locations
It also features a DC power loop enabling multiple unit operations
Power condenser microphones requiring phantom power
Operates on two 9 Volt alkaline batteries, or the included 9V DC adapter
High-frequency switching power supply to eliminate noise
Utilizes a switching regulator for stable voltage performance
Battery life approx. 10 hours, using one 9V alkaline battery
Package Included:
1 x Power Supply(microphone and battery are not included) |
Reviews
There are no reviews yet.