Content | The PSM 1000 Personal Monitor System delivers a networkable, dual channel transmitter and a diversity bodypack receiver for an unprecedented combination of audio and RF performance.
Environment: Large scale professional performance
Wired Bodypack Option: No
Further technical specifications:
RF Carrier Range
470–952 MHz
Note: varies by region
Compatible Frequencies
Per band: 39
Note: varies by region
Tuning Bandwidth
72–80 MHz
Note: varies by region
Operating Range (environment dependent)
90 m (300 ft)
Audio Frequency Response
35 Hz–15 kHz
Signal-To-Noise Ratio (A-Weighted)
90 dB (typical)
Total Harmonic Distortion (ref. ±34 kHz deviation @1 kHz)
80 dB (typical)
Frequency Stability
±2.5 ppm
MPX Pilot Tone
19 kHz (±0.3 kHz)
Modulation
FM*, MPX Stereo
* ±34 kHz deviation (nominal)
Operating Temperature
-18°C–+57°C | |
Move freely on stage while the perfect monitor mix is delivered directly to your ears: the amazing performance and reliability of the U500® In-Ear Monitoring Systems will surpass your expectations for certain. Designed with the pro user in mind, they feature advanced technology, contemporary looks and straightforward operation.
U500® In-Ear Systems provide a selection of 96 channels and 2, 10 or 30 mW RF output power for a transmission range greater than 100 m. For quick and trouble-free setup, they allow for convenient infrared synchronisation of transmitter and receiver. U500® In-Ears sport high-contrast OLED displays and allow for individual user name assignment. In addition, you can save 10 custom presets.
To deliver pristine, precise audio U500® In-Ear Monitoring Systems include a 3-band EQ with parametric mids, a switchable limiter and a squelch circuit. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. With a signal-to-noise ratio greater than 95 dB and less than 0,3% THD, the U500® In-Ear's noise floor is exceptionally low.
Drawing little current only, the U500® Bodypack Receiver operates up to 10 hours on two AA batteries. A volume control allows convenient in-performance monitoring level adjustment. Three selectable squelch levels ensure optimum performance at all times.
U500® In-Ear Monitoring Systems are available for operation in five frequency ranges. The 470 - 490 MHz, 514 - 542 MHz, 584 - 608 MHz and 655 - 679 MHz bands permit running up to 12 systems simultaneously. In the 823 - 832 MHz + 863 - 865 MHz range six systems can be operated at the same time providing wireless monitoring for your entire band.
Product type
In-ear Monitoring
LDIEHP2 - LD Systems IE HP 2 Professional In-Ear Headphones
Type
Stereo-In-Ear Headphones
Converter principle
Dynamic
Frequency response
20 - 18000 Hz
Connection type
3.5 mm TRS
Accessories (included)
3 pairs of foam earpieces , 3 pairs of silicone earpieces , Transport case
LDU506IEMR - LD Systems U506 IEM R Receiver
Product type
In-ear Monitoring Accessories
Transmission frequency range
655 - 679 MHz
Transmission method
FM, mono/stereo
Frequency response
40 - 16000 Hz
Max. audio output level
33 mW @ 16 Ohm mW , 80 mW @ 33 Ohm mW
Indicators
Multifunctional OLED-Display , RF (LED)
Operating time
< 10 hours
Antenna connector
Fixed to housing
Controls
Down , On / Off , Up , volume
Operating voltage
2 x 1.5 V AA
Features
battery status LED
Accessories (included)
2 x AA batteries , Antenna
LDU506IEMT - LD Systems U506 IEM T Transmitter
Modes of operation
focus/mono/stereo
Rated HF output power
Variable (2mW, 10mW, 30mW)
Signal-to-noise ratio
93 dB
Total Harmonic Distortion (THD)
0.3 %
Input connectors
Combo TRS 6.3 mm , XLR (balanced)
Input impedance (kOhms)
12 kOhm
Controls
Menu selector Button , Power On/Off , volume headphones
Operating voltage
12 - 18 V DC
Accessories (included)
19" Rack mount kit , BNC-Antenna , power adapter
|
P7T Wireless Transmitter
Key Features
Built-in audio limiter
Internal power supply
1/2 rack space
Remotable/combinable antennas
Operating Controls
Input level knob
Operating mode (Stereo, Mono, MixMode)
Earphone volume knob
Channel selector
Group select switch
LED Indicators
8-segment input level
Frequency group
P7R Wireless Bodypack Receiver
Key Features
Frequency locator
Dynamic overload protection
Rugged metal chassis
Operating Controls
Operating Mode (Stereo, Mono, MixMode)
Volume knob
Balance knob
Defeatable limiter
High-frequency boost
Channel selector
Group select switch
LED Indicators
Power
RF reception
Low battery
|
M3 IEM Brochure 989 KB
M3 Owners Manual 6.24 MB
M3 License Options 403 KB
M3 Declaration of Conformity 221 KB
Audio-Technica's advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica's versatile Personal Mix Control, which gives allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¼" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.
M3 Components
EP3 Headphones
In-ear dynamic headphones offer high-fidelity sound and excellent isolation
M3T Stereo Transmitter
Wireless UHF transmitter (frequency-agile) offers LCD display and 1321 user-selectable frequencies
M3R Stereo Receiver
Personal Mix Control in a lightweight body-pack with backlit LCD display
- High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
- 1321 selectable UHF channels with automatic frequency scanning
- Up to 16 simultaneous systems per frequency band
- Three receiver modes: Personal Mix, stereo, and mono
- Personal Mix Control allows volume and mix control of two independent signals at the receiver
- LCD information display offers step-through menus for setting preferences
- XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
- Adjustable squelch eliminates annoying static
- Pilot tone protects against RF interference when transmitter is turned off
- Multi-level limiter (defeatable) helps protect hearing from sudden peaks
- Portable system is quick to load and set up
- Reduces on-stage audio clutter for better overall mix & less feedback
- Use any number of Stereo Receivers (with individual mixes) on the same frequency
- Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
- Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
- Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input
Overall Specifications - Operating Frequencies: Band E: 790.000 to 822.000 MHz, 1281 frequencies
Band F: 832.000 to 865.000 MHz, 1282 frequencies
Band L: 575.000 to 608.000 MHz, 1321 frequencies
Band M: 614.000 to 647.000 MHz, 1321 frequencies
Not all frequency bands available in all areas. Please check with local regulations. - Minimum Frequency Step: 25 kHz
- Modulation Mode: FM stereo
- Maximum Deviation: ±40 kHz
- Dynamic Range: 90 dB (typical), A-weighted
- Total Harmonic Distortion:
| The new LD Systems MEI 100 G2 B 6 In-Ear Monitoring-System with 96 UHF channels offers outstanding sound quality and a large dynamic range in the 655 – 679 MHz band.
The system toggles between mono and stereo mode for perfect monitoring for live musicians, actors or speakers. A built-in limiter ensures even, distortion-free sound reproduction with a frequency response of 80Hz - 15 kHz and stands out because of its high signal-to-noise ratio and low total harmonic distortion. The LD MEI 100 G2 permits simultaneous operation of up to 5 systems.
Both transmitter and receiver feature multifunctional displays that show all important system information. With high quality batteries, it is possible to attain running times of 10 hours and more. The MEI 100 G2 package includes high-quality earphones, a 19" rackmount kit, and a rugged transport box made of ABS plastic.
Product type
In-ear Monitoring
Transmission frequency range
655 - 679 MHz
LDMEI100G2BPRB6 - LD Systems MEI 100 G2 BPR B 6 Receiver for LDMEI100G2 In-Ear Monitoring System band 6
Product type
In-ear Monitoring Accessories
Type
Receivers
Channels
96 (8 groups of 12 channels)
Transmission method
FM, stereo
Frequency response
80 - 15000 Hz
THD
0.25 %
Audio output
3.5 mm TRS
Max. audio output level
100 mW
Indicators
RF (LED)
Operating time
> 10 hrs.
Controls
volume
Operating voltage
2 x 1.5 V AA
Features
incl. batteries
Width
65 mm
Height
95 mm
Depth
25 mm
Weight
0,1 kg
LDMEI100G2TB6 - LD Systems MEI 100 G2 T B 6 Transmitter for LDMEI100G2 In-Ear Monitoring System band 6 655 - 679 MHz
Type
Transmitters
Modes of operation
mono/stereo
Rated HF output power
10 mW
Inputs
2
Input connectors
XLR
Input impedance (kOhms)
8.5 kOhm
Antenna connector
BNC
Controls
volume headphone
Operating voltage
12 - 18 V DC
Width
212 mm
Height
38 mm
Depth
90 mm
Weight
1,1 kg
Accessories (included)
Power supply
|
Reviews
There are no reviews yet.