SHURE SLX1-R5 – Bodypack Transmitter

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• Frequency and power lockout
• 3-segment battery fuel gauge
• 2 AA batteries (included) provide 8 hours of continuous use
• 518 - 782 MHz operating range

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

Gain Adjustment Range

30dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded ABS case

Power Requirements

2 "AA” size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

• Handheld with dynamic capsule
• Switchable Gain level (20 dB)
• Easy handling and setting of the 16 channels via ASC infrared frequency scanning
• Low-battery indicator
• Up to 10 hours of operation with 2 AA batteries (depending on the type)
• Soft-touch surface

VP68 Microphone with FP2 Handheld Transmitter

The FP2 Handheld Wireless Transmitter features either the legendary Shure SM58® cardioid dynamic microphone capsule or the VP68 omnidirectional condenser capsule mounted to lightweight, durable transmitter handles.

FP2 is compatible with all Shure wireless capsules and ideal for use with FP Wireless and SLX Wireless.

FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

    Automatic transmitter setup instantly syncs the transmitter to the receiver frequency
    LED indicator for control lockout, IR/RF sync, and low battery
    Legendary SM58® or VP68 microphone capsule options

The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

UHF-R handheld transmitters boast a rugged, lightweight construction and an antenna design which advances RF transmission reliability.

The transmitter design allows for interchangeable microphone cartridges. The UR2 is offered with BETA 87A, BETA 87C, BETA 58A, SM86, SM87A, SM58, KSM9 and VP68.

For use with UHF-R Wireless Systems.  UHF-R Wireless features KSM9 as the premier choice in handheld vocal microphones.




    Switchable RF power
    Frequency and power lockout
    Bit-mapped backlit LCD
    2 AA batteries -- up to 9.5 hours continuous use
    Infrared automatic transmitter sync
    All metal die-cast construction
    Interchangeable cartridges: SM58, SM86, SM87A, Beta 58A, Beta 87A, Beta 87C, KSM9, and VP68

Shure SLX2-BETA87C-R5 Wireless Microphone

Features:

Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range

Operating Range Under Typical Conditions

100m (300 ft.)

Note: actual range depends on RF signal absorption, reflection, and

interference

Audio Frequency Response (+/? 2 dB)

Minimum: 45 Hz

Maximum: 15 kHz

(Overall system frequency depends on microphone element.)

Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)

0.5%, typical

Dynamic Range

>100 dB A-weighted

Operating Temperature Range

?18°C (0°F) to +50°C (+122°F)

Note: battery characteristics may limit this range

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied

to tip of WA302 phone plug) produces positive voltage on pin 2 (with

respect to pin 3 of low impedance output) and the tip of the high

impedance 1/4-inch output.

SLX1 Bodypack Transmitter

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

Gain Adjustment Range

30dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded ABS case

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX2 Handheld Transmitter

Audio Input Level

+2 dBV maximum at -10dB position

-8 dBV maximum at 0dB position

Gain Adjustment Range

10dB

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions (including SM58 cartridge)

254 mm x 51 mm dia. (10 x 2 in.)

Weight

290 grams (10.2 oz.) without batteries

Housing

Molded PC/ABS handle and battery cup

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX4 Receiver

Dimensions

42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)

Weight

816 g (1 lb. 13 oz.)

Housing

Galvanized steel

Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)

XLR connector (into 600 Ω load): ?13 dBV

1/4 inch connector (into 3000 Ω load): ?2 dBV

Output Impedance

XLR connector: 200 Ω

1/4 inch connector: 1kΩ

XLR output

Impedance balanced

Pin 1: Ground

Pin 2: (+)

Pin 3: (-)

Sensitivity

?105 dBm for 12 dB SINAD, typical

Image Rejection

>70 dB, typical

Power Requirements

12?18 Vdc at 150 mA, supplied by external power supply