| Content | SLX2 - BETA58A - R5 Handheld Transmitter with BETA58 Microphone
BETA58A Microphone Cartridge
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
SLX2 Transmitter
SLXTM Wireless Systems feature a wide variety of industry-standard handheld vocal microphones. Options include the Beta 87A or C, Beta 58A?, SM86, and the legendary SM58?.
SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
- Automatic Transmitter Setup
- Backlit LCD with timeout feature
- Frequency and power lockout
- 3-segment battery fuel gauge
- 2 AA batteries (included) provide 8 hours of continuous use
- 518 - 782 MHz operating range
|
Modulation
FM (45 kHz max. deviation)
Frequency Range
470–952 MHz (depending on region)
Tuning Bandwidth
Up to 80 MHz (depending on region)
Antenna
Dipole, UR3 housing and attached microphone form the antenna
Carrier Frequencies
Up to 3200, tunable in steps of 25 kHz (depending on region)
RF Power Output
Selectable 10 mW or 50 mW maximum, depending on region
Power Requirements
Two (2) 1.5V AA alkaline
Battery Life
10 Hours (alkaline) with no phantom power @ 10 mW, typical (frequency band dependent)
4 Hours (alkaline), with 48 V phantom power @ 50 mW, typical (frequency band dependent)
Gain Adjustment Range
-10 to +20 dB, MIC or LINE input setting
Pilot Tone
32 kHz
Frequency Stability
± 0.0015%
Spurious Radiation
75 dB below carrier (typical)
Equivalent Input Noise
-127.0 dBV, A-weighted (audio front end)
Maximum Audio Input level
+24 dBV (LINE input, 0 dB gain)
-21 dBV (MIC input, 0 dB gain)
Differential Input Impedance
6 kΩ LINE input setting
3 kΩ MIC input setting
System Frequency Response
35 Hz–17 kHz, (+1.5 dB, -3 dB)
Note: Overall system frequency response depends on the microphone element and receiver.
High Pass Filter
Two-pole (12 dB per octave), selectable cut off frequency from 40 Hz to 240 Hz
System THD+N
|
VP68 Microphone with FP2 Handheld Transmitter
The FP2 Handheld Wireless Transmitter features either the legendary Shure SM58® cardioid dynamic microphone capsule or the VP68 omnidirectional condenser capsule mounted to lightweight, durable transmitter handles.
FP2 is compatible with all Shure wireless capsules and ideal for use with FP Wireless and SLX Wireless.
FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Automatic transmitter setup instantly syncs the transmitter to the receiver frequency
LED indicator for control lockout, IR/RF sync, and low battery
Legendary SM58® or VP68 microphone capsule options
|
Artist Elite® AE3300 cardioid condenser capsule with integral shock mount
Available in the following frequency bands:
541.500 - 566.375 MHz (C Band)
655.500 - 680.375 MHz (D Band)
721.500 - 746.375 MHz (G Band)
25 kHz frequency spacing makes it easier to find a clear, open frequency in crowded RF environments
Two-stage pop filter to protect against "p” pops
Dual output power selection to optimize battery life
Digital Tone Lock™ squelch to identify the wireless transmitter to the receiver
High efficiency dual companding system for flawless audio
Function menu displayed in a backlit LCD window and controlled by internal touch switchesFour nameable user presets
Operates on two AA batteries
Battery fuel gauge LCD readout on the body of the microphone
Power/mute lock provision
Dual-colour power/mute status indictor
18 dB audio input level adjustment
Integral capsule 6 dB pad switch
Rugged metal housing with integral antenna
Supplied with a heavy-duty microphone stand clamp
RF Power Output: High: 35 mW; Low: 10 mW, nominal
Spurious Emissions: According to National Regulations
Dynamic Range: >=110 dB, A-weighted
Microphone Element: Cardioid Condenser
Batteries: Two 1.5V AA alkaline (not included)
Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
Dimensions: 239mm long, 50mm diameter
Net Weight: 270g
Accessory Included: AT8456a Quiet-Flex™ stand clamp
|
The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
| Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
| Wavelength | 870 nm (AM: Brightness modulation) | | Modulation Method | Frequency modulation | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | | Tone Signal | 32.768 kHz | | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | | Maximum Input Sound Pressure | 120 dB SPL | | Microphone Unit | Unidirectional electret condenser microphone | | Frequency Response | 100 Hz - 12 kHz | | Preemphasis | 300 μs | | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | | Dimensions | φ37 × 241.8 (H) mm (φ1.46" × 9.52“) | | Weight | 170 g (0.37 lb) (with battery) | | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
Bodypack transmitter with rugged aluminium body
30 MHz wide UHF band, up to 1200 selectable frequencies
Backlit display and jog switch for ease of use
Up to 50 mW RF output for maximum immunity to interference and dropouts
Optional remote mute switch
Operates for up to 15 hours on AA size dry batteries, 12 hours on optional BP 4000 battery pack with integrated Smart Battery Management System
Charging contacts for easy battery charging on optional charger
-Theater, onstage miking
-Conferencing
-Houses of worship
-Live sound
-Sound/AV company
Carrier frequency range 500 to 530, 570 to 600, 650 to 680, 680 to 710, 720 to 750, 760 to 790, 790 to 820, 835 to 863 MHz
Audio bandwidth 35 to 20,000 Hz
THD 120 dB(A) typical
Modulation FM
RF radiation max. 50 mW (ERP)
Battery life 2 AA size dry batteries: 15 hours typ.; BP 4000 rechargeable battery pack: 12 hours typ.
Dimensions 70 x 90 x 25 mm (2.8 x 3.5 x 1 in.)
Net weight 95 g (3.4 oz.)
|
Reviews
There are no reviews yet.