| Content |
The Shure Model WH30 is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility, comfort, low microphone-visibility, and high sound quality are required. Because of its cardioid (unidirectional) pickup pattern, the WH30 provides isolation from extraneous sound sources and high gain-before-feedback.
The wireframe and gooseneck adjust to any head size and shape. An integrated elastic CROAKIES?. headband comfortably pads and secures the headset. The WH30 is supplied with two snap-on windscreens, clothing clip, storage bag and cable-management device.
The WH30 headset microphone is a perfect fit for those who desire total freedom of movement and need the high-quality audio of a condenser microphone.
FEATURES
Tailored frequency response enhances vocal range Flexible gooseneck for optimum microphone placement Isolation shock mount reduces vibration noise Low-profile, lightweight design Cardioid polar pattern provides maximum gain before feedback High sound pressure level capability Secure snap-on windscreen reduces "p" pops
|
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g) |
Shure WBH53T Tan Headworn Condenser Microphone
Features of the Shure WBH53 Headworn Microphone:
? Comfortable, latex-free Dynaflex? earforms that hide behind the ears
? Thin, non-reflective wireframe that is easily hidden underneath hair
? Ultra-thin detachable microphone boom mount for right or left positioning
? Interchangeable frequency response caps (mild or high, two pieces each)
? Two foam windscreens included
? Clothing clip for securing cable
? Corrosion resistant
? Easy to clean
? Durable carrying case for protective storage
? Available in either black or tan
? Available with either TA4F connectors or tinned leads (no connector) for full wireless system compatibility
|
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g)
| The AKG WMS 45 Sport A 1 Perception Wireless Sports Set is a lightweight, headworn wireless microphone system that allows for maximum user mobility during sports class instruction and all other hands-free applications.
The system includes the SR 45 wireless receiver, PT 45 bodypack transmitter and the C 544 L headworn microphone.
The C 544 L is a headworn miniature condenser microphone with a cardioid polar pattern and convenient behind-the-neck headband. The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm places the mic in front of the corner of your mouth, rather than directly in front of your mouth. This is to minimize pop noise and protect the microphone from contamination. Furthermore, a moisture shield on the microphone capsule is designed to make it difficult for sweat and makeup to penetrate into the microphone.
To help you find an interference-free channel to use, the Perception Wireless Sports Set has 8 UHF frequencies to choose from. Designed for long-lasting continuous use, the compact PT 45 bodypack is powered with a single AA battery for up to 8 hours. The SR 45 receiver provides XLR and 1/4" jack outputs for connection to your mixer and amplification system.
Features:
- 8 hours of operation with a single AA size battery
- PT 45 bodypack transmitter also compatible with all AKG MicroMics
- Low battery indicator
- PT 45 bodypack designed to be compact and lightweight
- C 544 L headworn microphone comes with moisture shields protecting the transducer from perspiration for sports instruction and other active applications. The C 544 L uses the transducer of the C 555 L and is designed to be quick and easy to put on or replace if necessary
Specs:
Receiver:
- Receiver Type: SR45 Receiver
- Carrier Frequency: A / 530 - 560MHz
- Modulation: FM
- Audio Bandwidth: 40 Hz to 20 kHz
- THD & Noise: typ. 0.8%
- Signal-to-Noise Ratio: typ. 105 dB(A)
- Squelch: -100 to -70 dBm Adjustable
- Connections: Balanced XLR and unbalanced 1/4" (6.3 mm) jack: adjustable from mic to line level. Output level at rated deviation: 500 mV rms
- Dimensions: 7.87 x 7.48 x 1.73" (200 x 190 x 44 mm)
- Weight : 0.80 lb (360 g)
Transmitter:
- Transmitter Type: PT45 Bodypack
- Carrier Frequency: A / 530 - 560MHz
- Modulation: FM
- Audio Bandwidth: 40 Hz to 20 kHz
- THD & Noise: typ. 0.8%
- Signal-to-Noise Ratio: typ. 105 dB(A)
- RF Output: 10 mW
- Power: 1x 1.5V AA Battery, Up to 10 Hours
- Dimensions: 2.36 x 2.91 x 1.18" (60 x 74 x 30 mm)
- Weight: 0.13 lb (60 g)
Microphone:
- Microphone Type: C 544 L Headworn Microphone
- Transducer: Pre-polarized condenser microphone
- Polar Pattern: Cardioid
- Frequency Response: 20 Hz to 20 kHz
- Sensitivity: 40 mV/Pa (-28 dBV re 1 V/Pa) @ 1000 Hz
- Signal to Noise Ratio: 22 dB(A)
- Maximum Input Sound Level: 126 dB / 130 dB (for 1%/3% THD)
- Supply Voltage: 9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter
- Current Consumption: Approx. 2 mA
- Impedance: Electrical Impedance @ 1000 Hz: 200 ohms, electronically balanced
- Recommended Load Impedance: > 2000 ohms
- Connector: Mini XLR 3-pin female
- Operating Temperature: 4 to 140°F (-20 to +60°C), R.H. at 68°F (+20°C): 99%
- Dimensions: 5.2" (130 mm) Diameter
- Cable Length: 5\' (1.5 m)
- Net Weight: 1.1 oz (30 g) without connector
The Perception Wireless high performance Sports Set delivers brilliant sound and is surprisingly easy to use. | Suggested for Speech, Head-worn microphone, Sports/Aerobics
- Ergonomically optimized behind-the-neck headband
- Moisture shield
- External shock mount for high mechanical-noise rejection
The C 544 L is a head-worn miniature condenser microphone with a convenient behind-the-neck headband. The microphone has a cardioid polar pattern and therefore "prefers” sounds arriving from the front (from the userʼs mouth).
The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm will place the microphone in front of the corner of your mouth to minimize pop noise and protect the microphone from contamination. The supplied windscreen makes the microphone even less susceptible to wind and pop noise.
A special moisture shield on the microphone capsule makes it difficult for moisture and makeup to penetrate into the microphone. This barrier prevents the microphone sound entries from being clogged by sweat or makeup which would make the sound dull and reduce the sensitivity of the microphone. Therefore, never remove the moisture shield from the microphone.
The C 544 L is a condenser microphone and therefore needs a power supply.
| Type |
Pre-polarized condenser microphone |
| Polar pattern |
cardioid |
| Frequency range |
20 Hz to 20,000 Hz |
| Sensitivity |
40 mV/Pa (-28 dBV re 1 V/Pa) |
| Max. SPL |
126 dB / 130 dB (for 1%/3% THD) |
| Equivalent noise level (IEC 60268-4) |
22 dB-A |
| Impedance |
200 ohms, electronically balanced |
| Recommended load impedance |
>2000 ohms |
| Supply voltage |
9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter |
| Powering |
approx. 2 mA |
| Environment |
temperature: -20°C to +60°C, R.H. at +20°C: 99% |
| Cable |
1.5 m (5 ft.) |
| Finish |
matte black |
| Dimensions |
130 mm (5.2 in.) in dia. |
| Net weight |
30 g (1.1 oz.) exc. of connector |
| Shipping weight |
200 g / 7.1 oz. |
|
Reviews
There are no reviews yet.