Content |
2-Way, 10“
High Power System |
Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
Specifications and Characteristics |
Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
Nominal Impedance |
8 Ohm |
Power Rating |
|
(RMS)2 |
300W |
Program2 |
600W |
Peak2 |
1200W |
Horizontal Coverage |
(-6dB) 90? |
Vertical Coverage |
(-6dB) 40? |
Sensitivity (dB/1w@1m) |
97dB SPL |
SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
Connectors |
2 Neutrik NL-4 Connectors on steel plate |
Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
Recommended Sub-woofer |
Space PMS-15 |
Enclosure and Installation |
Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
Handle |
On top of the cabinet. |
Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
Net Weight |
18Kg (39.6 pounds) |
Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
Notes |
|
1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
| This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 10 G3 provides 300 watts of continuous power; the maximum sound pressure level is 120 dB. Its specially developed 10" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 10 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 10 G3 is an affordable solution for professional PA applications; extensive accessories support the use on stage and in fixed installations.
Product type
PA loudspeaker
Low/mid driver dimensions
10 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50
Frequency response
65 - 20000 Hz
Protection circuits
HF Driver
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
4
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
|
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
- 2-way, bass reflex design
- Digital Signal Processor with graphic display
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- ORIGINAL / LIVE The renowned, smooth FBT sound
- VOCAL A special EQ setting to maximise speech intelligibility
- DJ Designed to keep the energy high and your audience dancing
- TOURING The reliability and the roar of the industry’s most popular touring systems
- LOUDNESS The ultimate preset for listening at a medium or low volume
- WARM A special setting to emphasise full-bodied, low-mid frequencies.
Code: |
40682 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
122/127 dB |
Dispersion: |
80° x 50° rotatable HxV |
Crossover Frequency: |
1.8 KHz |
Recommended HP filter: |
HP 50Hz - 12-24dB/oct |
Input connector: |
2 x SPEAKON |
Net Dimension (WxHxD): |
329x575x325 / 12.95x22.63x12.79 mm/inch |
Net Weight: |
15.1/33.28 kg/lb |
Transport Dimension (WxHxD): |
420x675x400 / 16.53x26.57x15.74 mm/inch |
Transport Weight: |
17.6/38.80 kg/lb |
| Full Range Speaker
- Equipped with: 10" + 1“
- Dispersion: 90° x 60° CD horn
- Power: 300 W RMS
- Impedance: 8 Ohm
- Frequency range: 95 - 19,000 Hz
- Max. SPL: 126 dB
- Flange mount
- 3 x M8 fly points
- 2 Handles
- Connectors: 2 x speaker twist
- Dimensions: 320 x 480 x 290 mm
- Weight: 12.9 kg
|
Archon - A new generation of improved speakers for modern indoor spaces
The Archon series of full-range and bi-amped speaker systems have been designed to provide ample bandwidth and high SPL for an accurate sound reproduction in the most various application projects.
With the Archon series FBT wants to meet today’s expectations of the installed sound market: a new generation of improved speakers responding to high quality sound requirements for modern indoor spaces.
The FBT Archon series lines up three 2-way full range/bi-amp models and three 2-way full range compact models; in addition, two low-profile subwoofers (2x8” and 2x15”) increase the low frequency extension of the desired systems. All Archon speakers are elegantly designed and crafted to meet the most demanding architectural design.
The FBT Archon series has been engineered to fulfill the need of high quality sound in bars, pubs, restaurants, retail shops, clubs, entertainment venues, fitness centers, conference rooms, theatres, educational institutions, houses of worship, museums, exhibition centers, cruise ships, corporate A/V, granting excellent speech intelligibility, wide and precise band coverage, ease of installation thanks to the flexible mounting hardware.
- 1 x 10” (2.5” VC) B&C custom made high excursion LF woofer
- 1 x 1” (1.7” VC) B& C custom made HF compression driver
- 1 x 1” FBT rotatable 80° x 50° constant directivity horn
- 2-way, passive sound reinforcement systems
- 15mm (0.6”) baltic birch plywood cabinets
- B&C custom designed high excursion LF woofers
- B&C custom designed HF compression drivers
- Full range / bi-amp crossover networks with protection
- 2 x Neutrik NL-4 speakon connectors
- 1 x 4 Euroblock terminal speaker connector
- 12 x M10 threaded rigging points
- 2 x metal flange threads for U bracket wall mount
- Acoustically transparent steel grille and antidust protection cloth
- Rear pocket handle to ease lifting and installation of the cabinet
- 35mm (1. 3/8”) top hat for speaker stand
- New FBT rotatable logo badge following vertical or horizontal installation
- Optional mounting hardware
- Optional line transformer 200W
Code: |
36329 |
Configuration: |
2 way |
Recommended amplifier: |
700 W RMS |
Long Term power: |
350 W |
Short term power: |
1400 W |
Transformer: |
100/200 optional V |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2.5 coil inch |
AES power: |
300 W |
High frequency driver: |
1 - 1.7 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
125/129 dB |
Dispersion: |
80°x50° HxV |
Crossover Frequency: |
1.8 passive or active Bi-Amp KHz |
Recommended HP filter: |
45hz - 24dboct |
Recommended external filter: |
Digital Management with presents |
Input connector: |
2 x Speakon NL 4 in & thru 4 x Euroblock |
Net Dimension (WxHxD): |
320x550x325 - 12.59x21.65x12.79 mm/inch |
Net Weight: |
15/33 kg/lb |
Transport Dimension (WxHxD): |
420x650x420 - 16.53x25.59x16.53 mm/inch |
Transport Weight: |
17 / 37.4 kg/lb |
|
The C3110 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.
Its compact size makes it ideal for low visibility side wall mounting.The high-frequency section is a constant directivity horn loaded to a 1” Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 10” woofer with a 2” voice coil.
Features |
---|
90° x 70° CMD (Constant Matching Design) constant directivity horn | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network | 4 Suspension points (M10) | 35 mm standard internal pole mount |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 59 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 70 Hz | ÷ 20 kHz | Max SPL @ 1m: | 127 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 70° | | Directivity index; Q: | 9.4 | | System Sensitivity: | 96 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 300 Watt | | Peak Power Handling: | 1200 Watt | | Recommended Amplifier: | 600 | | Protections: | Dynamic | | Crossover frequencies: | 1800 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1" HF driver, 1.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 109 dB | | Woofer: | 10" woofer, 2" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 250 Watts AES | | Sensitivity: | 96 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | Handles: | 1on back | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 300 / 11.81 mm/inch | | Depth: | 287 / 11.30 mm/inch | | Net Weight: | 13 / 28.66 Kg/Lbs |
|
Reviews
There are no reviews yet.