Content |
PM Series ? PMS-15 Single 15“, High Power Sub-Woofer |
Characteristics |
|
Double-tuned, parallel band-pass design. |
|
Advanced Technology transducers including optimised cooling and all-weather cones. |
|
Precision cabinet construction to achieve light and high resistance cabinets. |
|
Wear-proof, bi-component exterior finish offering ultra-high anti-scratch protection. |
All these characteristics contribute to obtain the advantages and performance of a true Sub-Woofer, so important in a Line Array rig. Its benefits are positively noticeable in P.A. set-ups as well as in fixed installations. The PMS-15 enclosure enhances the whole system with an extra low-energy input that is so important in today's music material, whatever the style. The PMS-15 is a rugged enclosure, which mounts a high power, 15" transducer in a double-tuned, parallel Band-Pass configuration. With these advanced components the cabinet renders an astounding effectiveness hard to match by any other cabinet of its class and size. The cabinet is equipped with a protection front steel grille, coated with outdoor resistant compounds. It is fitted with heavy-duty skids permitting stacking in total security. Integrated side handles are provided for ease of operation. The PMS-15 Subs can be stacked in the required proportions under the flown units or in a centrally situated position under the stage level. Its Efficiency and Frequency Range vary and depend on the total number of cabinets used. The horizontal coverage will be inversely proportional to the product of the length of the array and the concerned frequency. In this case between 20 and 80 Hz. Or put in a different way, the higher the number of cabinets, the better our directivity control and the more specific our pattern behaviour. Thus a medium/large assembly of subs in a Line Array rig is capable of producing large amounts of low-end energy. |
Applications |
|
Auditoria |
|
Stadia |
|
Concert Halls |
|
Convention Centres |
|
Theatres |
|
Open-air concerts and general events |
|
Large Ballrooms |
Specifications and Characteristics |
Frequency Response (Hz) |
-3dB 42Hz - 86KHz |
Frequency Range (Hz) |
±10dB 34Hz - 104Hz |
Sensitivity (dB/2,83V@1m) |
98dB |
SPL Max. Peak (dB SPL@1m) |
135dB |
Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor
|
Recommended crossover |
L-R 24dB/Oct - 80Hz |
Input power rating |
700W AES 1400W Program 2800W Peak |
Recommended power amp |
600W - 1100W RMS 8 Ohm amplifier
|
Constructive elements |
Transducers |
1x15" transducers with 4" coil 700W AES |
Enclosure |
Horizontal parallelepiped construction18mm Baltic cross ply, tongue and groove assembly throughout. 35mm front panel and outer frame. Bi-component epoxy finish |
Protection Grille |
1.5mm laminated steel with textured epoxy finish |
Enclosure protections |
Skids on all resting surfaces |
Handles |
Cut in the enclosure for ease of handling |
Connectors |
Two Neutrik NL-8 connectors on steel back plate |
Dimensions (WxHxD) |
609 x 317 x 523 mm 24 x 12.5 x 20.6 inches |
Net Weight |
32.5Kg (71.6Pounds) | |
The Sub 1.15 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.
In the low frequency range between 40 Hz and 260 Hz a Electro-Voice EVS-15S woofer in direct-radiator bass-reflex design produce an max. SPL of 125 dB.
Thanks to their low-pass filter, the Sub 1.15 can be operated simply in parallel mode to existing full-range cabinets. Also recommended, naturally, is the combination with the DSP 260 or DSP 600 and power amplifiers from the SL or LX series for the creation of active two-way systems.
Cabinet Subwoofer
Configuration Vented Direct Radiator
Components 1x 15" EVS-15S
Impedance 8 ohms
Rated Power 500 W
Peak Power 2000 W
SPL 1W/1m 93 dB
max. SPL 1m calc. 125 dB
Freq. Range 40 Hz - 260 Hz
Dimensions (WxHxD) mm 445 x 605 x 550
Net. Weight 28,5 kg
|
2x15''
800W/3200W Peak
133dB SPL max
4 Ohm
40Hz-125/250Hz
schwarz
|
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP56 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP55 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
Παθητικό subwoofer με 15” woofer, ισχύος 400W RMS / 800W peak στα 8Ω. Ευαισθησία 96dB, max spl 124db, τεχνολογία bass reflex. Διαθέτει φωλιά στο πάνω μέρος για την τοποθέτηση σωλήνα στήριξης δορυφόρου, frequency response: 40Hz-300Hz, βάρος: 35Kg.
Χαρακτηριστικά:
- Μικρό σε όγκο για τα δεδομένα του (15” speaker) sub-woofer κατάλληλο για χρήση σε μόνιμες εγκαταστάσεις όπως café, club, discotheque, pub καθώς και φορητή χρήση
- Ιδανικό ηχείο subwoofer για φορητές εγκαταστάσεις, djs και εταιρίες ενοικιάσεων
- Δυνατότητα αναβάθμισης σε αυτοενισχυόμενο subwoofer εύκολα και απλά, προσθέτοντας την ενισχυτική βαθμίδα AVM-2 (δεν περιλαμβάνεται)
- Για την σωστή χρήση του subwoofer απαιτείται τελικός ενισχυτής ο οποίος να έχει ισχύ εξόδου 450W RMS στα 8Ω
- Τέλειος συνδυασμός του subwoofer VIBE15-SUB Mk2 με τα ηχεία VIBE10 Mk2 or VIBE12 Mk2 για δορυφόρους
- Ειδική βαφή με μπογιά πολυουρεθάνης για αντοχή στις γρατζουνιές
- Μεταλλική σήτα με επίστρωση ειδικού ακουστικού αφρού για ένα όμορφο οπτικά ηχείο και την προστασία των υλικών του speaker από σκόνες, χτυπήματα, υγρασία, σταγόνες νερού
- 35mm εσωτερική φωλιά στο πάνω μέρος για την τοποθέτηση του σωλήνα στήριξης του δορυφόρου
- High Power 15inch Woofer με ALU basket
- Ειδικές υποδοχές στο πίσω μέρος του sub woofer για την τοποθέτηση ροδών μεταφοράς (δεν περιλαμβάνονται)
- Ισχύς: 400Wrms (800Wpeak)
- Input impedance: 8Ω
- Input Sensitivity: 96dB 1W/1m
- Max. SPL: 124dB
- Frequency response: 40 - 300Hz
- Διαστάσεις: 440 x 595 x 605 mm
- Βάρος: 35kg
|
Reviews
There are no reviews yet.