| Content | Dynamic microphone with on/off switch and 5m cable.
- Uses: Vocal and instrumental
- Cartridge: DC78, moving coil
- Polar pattern: Cardioid
- Sensitivity: - 54 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz)
- Frequency response: 50 Hz to 15 KHz
- Output impedance: 600 ohms 30 % (at 1 KHz)
- Connector: Balanced XLR output
- Body: Zinc alloy
- Cable: 5 m (16\'), XLR to XLR
- On / off switch: Lockable
- Protection box: Plastic
- Colour: Black with a grey windscreen
Type:
|
Dynamic |
| Pick Up Pattern: |
Cardioid |
| Frequency response: |
50 Hz to 15 KHz |
| Sensitivity: |
- 54 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz) |
| Ιmpedance: |
600 ohms 30 % (at 1 KHz) |
|
Professional dynamic microphone with On/Off switch. Very robust construction and excellent value-for-money. 4,5 m XLR male / XLR female cable included.
Product type
Microphones
Type
Vocals
Frequency response
80 - 15000lx @ 1m Hz
Directivity
cardioid
Nominal impedance
500 Ohm(s)
Max. SPL (1% THD @ 1kHz)
132 dB
Microphone input
XLR /3-pin, gold plated)
Length
165 mm
Diameter
52 mm
Accessories (included)
XLR / XLR cable, 4.5 m
Weight
0,652 kg
Features
on/off switch, locking | Behringer Ultravoice XM8500 Dynamic Cardioid Microphone
With the BEHRINGER vocal microphone ULTRAVOICE XM8500, your voice will shine in a way it never has before, giving a powerful edge to your performances. Your creative energy and highly professional demands finally have a worthy partner. You want your voice to come across at its best, capturing your audience with its power and expression. No problem: with the ULTRAVOICE XM8500, you've got them in your hands.
Bringing out the subtlest nuances and placing them properly in the mix: that's what a good vocal microphone is all about. And that's exactly what the ULTRAVOICE does. Its cardioid characteristic picks up sound from the front with the utmost sensitivity, while strongly dampening sound from the back. This gives you more security against feedback. The integrated shock-mount system effectively reduces handling noise to an absolute minimum. The XM8500's balanced low-impedance output lets you connect it to any console or microphone preamp - provided it has enough dynamic headroom. You'll need plenty of that: the ULTRAVOICE is so powerful that you'll put your current favorite microphone in its box. Even if it cost ten times as much.
On stage, dependability counts. The ULTRAVOICE won't let you down. Its rugged construction protects it against the toughest changes you can put it through. The matte anodized surface reduces reflections from studio or stage lighting. The two-stage pop filter and tough steel mesh keep breath and pop noises out of the signal.
Dynamic vocal microphone with smooth mid-frequency presence rise for excellent vocal projection Internal shock mount system to cut down handling noise Cardioid characteristic minimizes background noise and feedback Ultra-low distortion for a super clean sound Microphone stand adapter included Ultra-professional dynamic vocal microphone 50 Hz - 15 kHz frequency response for crystal-clear, highly detailed vocals Super rugged, reliable metal construction and electromagnetic shielding High-level balanced output Two-stage pop filter minimizes breath and pop noises Sensitivity - 70 dB
| Transducer |
Dynamic |
| Polar Pattern |
Cardioid |
| Frequency Response |
50 Hz to 15 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms |
| Output Connectors |
Gold-Plated Pin XLR-3M Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
8.47 oz. (240 g) |
| The Beta 87 microphone has consistently been a top choice of performers and audio technicians around the world due to its superb accuracy and detail, and rich vocal production. This long-standing favorite now features a new design and has been renamed the Beta 87A TM.
In response to user requests, Shure has redesigned this microphone by just slightly thickening the handle for a more comfortable feel when hand-held. In addition, the Beta 87A now includes the A25D break-resistant swivel adapter.
The Shure Model Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level (SPL) capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.
The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the "boomy" sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.
- Smooth, tailored frequency response provides detail, accuracy, and warmth for vocals
- Extremely accurate supercardioid pattern at all frequencies provides the highest gain-before-feedback
- Three-stage pop filter minimizes breath pop and noise
- Break-resistant stand adapter
- Frequency response: 50 to 20,000 Hz
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Supercardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
80 Hz |
Performance
| Frequency Range |
70 Hz to 20 kHz |
| Maximum SPL |
147 dB SPL |
| Impedance |
600 Ohms |
| Load Impedance |
2000 Ohms |
| Sensitivity |
2.6 mV/Pa |
| Signal-to-Noise Ratio |
76 dB A-Weighted |
| Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
| Weight |
11.29 oz / 320 g |
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
| Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
| Polar Pattern |
Supercardioid |
| Frequency Response |
50 Hz - 16 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms (290 Ohms Actual) |
| Output Connectors |
XLR-3 Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
9.92 oz. (278 g) |
|
Reviews
There are no reviews yet.