STANTON 520 V3 SPHERICAL DJ TURNTABLE CARTRIDGE

Discontinued

48.35 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Designed with the most demanding cueing in mind, the 520.V3 offers the tightest suspension in the 500 family of products. The results: this cartridge can take the most demanding loads and deliver on point tracking during backspinning and scratching. Available in the following versions: Single A single cartridge inside a blister pack. Twin Pack Two […]

 

Read more

Designed with the most demanding cueing in mind, the 520.V3 offers the
tightest suspension in the 500 family of products. The results: this cartridge
can take the most demanding loads and deliver on point tracking during
backspinning and scratching.
Available in the following versions:
Single
A single cartridge inside a blister pack.
Twin Pack
Two cartridges inside a blister pack.
Twin Pack H4S
Two cartridges conveniently pre-mounted on Stanton H4S silver headshells.

Perfect for:
Hip-hop / Scratch DJs

FEATURES:
Best cartridge in the 500 series for scratching
Tight suspension performs at any tracking weight
New industrial design 

TECHNICAL SPECS:
Frequency Response 20 to 17 kHz
Output @ 1kHz: 6.0mV
Channel Separation @ 1 kHz: 27dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Special High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80? @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 520

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “STANTON 520 V3 SPHERICAL DJ TURNTABLE CARTRIDGE”

Your email address will not be published. Required fields are marked *

Quick Comparison

STANTON 520 V3 SPHERICAL DJ TURNTABLE CARTRIDGE removeORTOFON MC 1 Turbo CARTRIDGE removeORTOFON OM 5E CARTRIDGE removeNUMARK CS-1 PROFESSIONAL DJ CARTRIDGE removeOrtofon 2M RED CARTRIDGE removeORTOFON OM Scratch CARTRIDGE remove
NameSTANTON 520 V3 SPHERICAL DJ TURNTABLE CARTRIDGE removeORTOFON MC 1 Turbo CARTRIDGE removeORTOFON OM 5E CARTRIDGE removeNUMARK CS-1 PROFESSIONAL DJ CARTRIDGE removeOrtofon 2M RED CARTRIDGE removeORTOFON OM Scratch CARTRIDGE remove
Image
SKU520V3MC1TurboOM5EH99NU000052MREDOMScratch
Rating
Price 48.35 incl. GR VAT199.00 incl. GR VAT 74.34 incl. GR VAT 69.00 incl. GR VAT 105.40 incl. GR VAT64.00 incl. GR VAT
Stock

Out of stock

In stock

Only 2 left in stock (can be backordered)

Available on backorder

Only 2 left in stock (can be backordered)

In stock

AvailabilityOut of stockIn stockOnly 2 left in stock (can be backordered)Available on backorderOnly 2 left in stock (can be backordered)In stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Designed with the most demanding cueing in mind, the 520.V3 offers the
tightest suspension in the 500 family of products. The results: this cartridge
can take the most demanding loads and deliver on point tracking during
backspinning and scratching.
Available in the following versions:
Single
A single cartridge inside a blister pack.
Twin Pack
Two cartridges inside a blister pack.
Twin Pack H4S
Two cartridges conveniently pre-mounted on Stanton H4S silver headshells.

Perfect for:
Hip-hop / Scratch DJs

FEATURES:
Best cartridge in the 500 series for scratching
Tight suspension performs at any tracking weight
New industrial design 

TECHNICAL SPECS:
Frequency Response 20 to 17 kHz
Output @ 1kHz: 6.0mV
Channel Separation @ 1 kHz: 27dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Special High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80? @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 520

The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile.  The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges.  The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.

Technical data  
Output voltage at 1000 Hz, 5cm/sec. 3,3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 22 dB
Channel separation at 15 kHz > 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) > 65 µm
Compliance, dynamic, lateral 13 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,8-2,2 g (18-22 mN)
Tracking force, recommended 2 g (20 mN)
Tracking angle 20°
Internal impedance, DC resistance 100 Ohm
Recommended load impedance 47 kOhm /
Cartridge body material Noryl
Cartridge colour Black
Cartridge weight 4,1 g

The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 4 mV
Channel balance at 1 kHz 2 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Internal impedance, DC resistance 750 Ohm
Internal inductance 450 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-600 pF
Cartridge colour, body/stylus Black/Black
Cartridge weight 5 g
Replacement stylus unit Stylus 5 E
*) Typical value
THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE. * Frequency response: 20 to 22,000Hz * Output: 6mV * Channel separation nominal: 32dB * DC resistance: 430 ohms/ch * Inductance: 400mH/ch * Weight: 18.0g * Channel balance: within 1.5dB * Tracking force: 3–6g * Recommended load: 47K ohms 200pf * Stylus tip: fine circular diamond * Application: club and mobile DJs, high outputThe 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. Of course the 2M isnʼt just another pretty face. It has been engineered to the highest standards and is congruent with Ortofonʼs unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge.  Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.  The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz  1,5 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Red
Cartridge weight 7,2 g
Replacement stylus unit 2M Red

For DJs that require increased tracking ability, the Scratch is up to the task.  Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces.  With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.  

Output voltage at 1000Hz, 5cm/sec.

7 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

25 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-15.000 Hz 3dB/-2dB

Tracking ability at 315 Hz at recommmende tracking force

80 μm

Compliance, dynamic lateral

6 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0-5,0 g (30-50 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

750 Ohm

Internal inductance

450 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

5 g

Replacement stylus unit

scratch

 
Weight0.10 kg0.40 kg0.05 kg0.18 kg0.70 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.40 kg
Weight 0.05 kg
Weight 0.18 kg
Weight 0.70 kg
Weight 0.10 kg