Content |
Designed with the most demanding cueing in mind, the 520.V3 offers the
tightest suspension in the 500 family of products. The results: this cartridge
can take the most demanding loads and deliver on point tracking during
backspinning and scratching.
Available in the following versions:
Single
A single cartridge inside a blister pack.
Twin Pack
Two cartridges inside a blister pack.
Twin Pack H4S
Two cartridges conveniently pre-mounted on Stanton H4S silver headshells.
Perfect for:
Hip-hop / Scratch DJs
FEATURES:
Best cartridge in the 500 series for scratching
Tight suspension performs at any tracking weight
New industrial design
TECHNICAL SPECS:
Frequency Response 20 to 17 kHz
Output @ 1kHz: 6.0mV
Channel Separation @ 1 kHz: 27dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Special High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80? @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 520
|
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1
| EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DONʼT
* Adjustable cartridge which will fit in a traditional headshell mount
* Replaceable diamond tip | The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
TECHNICAL DATA |
|
Output voltage at 1000 Hz, 5cm/sec. |
4 mV |
Channel balance at 1 kHz |
2 dB |
Channel separation at 1 kHz |
22 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at - 3dB |
20-25.000 Hz |
Frequency response |
20-20.000 Hz ± 2 dB |
Tracking ability at 315Hz at recommended tracking force *) |
65 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
750 Ohm |
Internal inductance |
450 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge colour, body/stylus |
Black/Black |
Cartridge weight |
5 g |
Replacement stylus unit |
Stylus 5 E |
|
Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.
ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI
Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.
With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.
Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.
TECHNICAL DATA CONCORDE DIGITRACK
Output voltage at 1000 Hz, 5cm/sec. 8 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 22 dB Channel separation at 15 kHz 15 dB Frequency range 20-20.000 Hz Frequency response 20-18.000 Hz -3 /- 2dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 m Compliance, dynamic, lateral 12 m/mN Stylus type Spherical Stylus tip radius R18 Equivalent stylus tip mass 0,6 mg Tracking force range 2-4 g (20-40 mN) Tracking force, recommended 3,0 g (30 mN) Tracking angle 20 Internal impedance, DC resistance 1325 Ohm Internal inductance 765 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/stylus Red/Red Cartridge weight 18,5 g Replacement stylus unit Digitrack | A budget cartridge that out performs a lot of other top-of-the-line models.
No need to go broke to get an affordable, tough-as-nails scratching tool.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec: 5 mV
- Channel balance at 1 kHz: 2 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at - 3dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended
tracking force, DIN 45.542:
- Tracking ability at 315Hz at
recommended tracking force: 70 µm
- Compliance, dynamic, lateral: 7 µm/mN
- Stylus type: Spherical
- Stylus tip radius: R 26 µm
- Equivalent stylus tip mass: 0,5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force, recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge colour: Black
- Cartridge weight: 5 g
- Replacement stylus unit: PRO S
|
Reviews
There are no reviews yet.