Content |
Designed with the most demanding cueing in mind, the 520.V3 offers the
tightest suspension in the 500 family of products. The results: this cartridge
can take the most demanding loads and deliver on point tracking during
backspinning and scratching.
Available in the following versions:
Single
A single cartridge inside a blister pack.
Twin Pack
Two cartridges inside a blister pack.
Twin Pack H4S
Two cartridges conveniently pre-mounted on Stanton H4S silver headshells.
Perfect for:
Hip-hop / Scratch DJs
FEATURES:
Best cartridge in the 500 series for scratching
Tight suspension performs at any tracking weight
New industrial design
TECHNICAL SPECS:
Frequency Response 20 to 17 kHz
Output @ 1kHz: 6.0mV
Channel Separation @ 1 kHz: 27dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Special High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80? @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 520
|
A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level.
Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
Output voltage at 1000Hz, 5cm/sec.
|
10 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
20 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-18.000 Hz
|
Frequency response
|
20-18.000 Hz +3/- 2dB
|
FIM distortion at recommended tracking force DIN 45.542
| |
Tracking ability at 315 Hz at recommended tracking force
|
120 μm
|
Compliance, dynamic lateral
|
11 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
1,5-10,0 g (15-100 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Internal impedance, DC resistance
|
1680 Ohm
|
Internal inductance
|
920 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-600 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Ortofon-Serato S-120 |
| A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level.
Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
Output voltage at 1000Hz, 5cm/sec. |
10 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
20 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at -3dB |
20-18.000 Hz |
Frequency response |
20-18.000 Hz +3/- 2dB |
FIM distortion at recomm. tracking force DIN 45.542 |
|
Tracking ability at 315 Hz at recomm. tracking force |
120 μm |
Compliance, dynamic lateral |
11 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
R 18 μm |
Tracking force range |
1,5-10,0 g (15-100 mN) |
Tracking force recommended |
4,0 g (40 mN) |
Internal impedance, DC resistance |
1680 Ohm |
Internal inductance |
920 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge weight |
18,5 g |
Replacement stylus unit |
Ortofon-Serato S-120 |
| THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output | The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
TECHNICAL DATA |
|
Output voltage at 1000 Hz, 5cm/sec. |
4 mV |
Channel balance at 1 kHz |
2 dB |
Channel separation at 1 kHz |
22 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at - 3dB |
20-25.000 Hz |
Frequency response |
20-20.000 Hz ± 2 dB |
Tracking ability at 315Hz at recommended tracking force *) |
65 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
750 Ohm |
Internal inductance |
450 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge colour, body/stylus |
Black/Black |
Cartridge weight |
5 g |
Replacement stylus unit |
Stylus 5 E |
|
Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec.
|
11 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
| -
|
Frequency range at -3dB
|
20-18.000 Hz
|
Frequency response
|
20-18.000 Hz - 3 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0 g (30 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
1.680 Ohm
|
Internal inductance
|
920 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-400 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Q.Bert |
|
Reviews
There are no reviews yet.