STANTON 520 V3 SPHERICAL DJ TURNTABLE CARTRIDGE

Designed with the most demanding cueing in mind, the 520.V3 offers the
tightest suspension in the 500 family of products. The results: this cartridge
can take the most demanding loads and deliver on point tracking during
backspinning and scratching.
Available in the following versions:
Single
A single cartridge inside a blister pack.
Twin Pack
Two cartridges inside a blister pack.
Twin Pack H4S
Two cartridges conveniently pre-mounted on Stanton H4S silver headshells.

Perfect for:
Hip-hop / Scratch DJs

FEATURES:
Best cartridge in the 500 series for scratching
Tight suspension performs at any tracking weight
New industrial design 

TECHNICAL SPECS:
Frequency Response 20 to 17 kHz
Output @ 1kHz: 6.0mV
Channel Separation @ 1 kHz: 27dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Special High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80? @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 520

• Output voltage at 1000 Hz, 5cm/sec: 5 mV
• Channel balance at 1 kHz: 2 dB
• Channel separation at 1 kHz: 20 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at - 3dB: 20-20.000 Hz
• Frequency response: 20-18.000 Hz + 3 / - 2 dB
• FIM distortion at recommended tracking force, DIN 45.542:
• Tracking ability at 315Hz at recommended tracking force: 70 µm
• Compliance, dynamic, lateral: 7 µm/mN
• Stylus type: Spherical
• Stylus tip radius: R 26 µm
• Equivalent stylus tip mass: 0,5 mg
• Tracking force range: 3,0-5,0 g (30-50 mN)
• Tracking force, recommended: 4,0 g (40 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 750 Ohm
• Internal inductance: 450 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 200-600 pF
• Cartridge colour: Black
• Cartridge weight: 5 g
• Replacement stylus unit: PRO S

The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear.

Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever.  Accurately traces the grooves of your records for smooth sound throughout the frequency range.
    Universal mount
    Biradial diamond tip
    Tubular aluminum alloy stylus cantilever
    Standard mount adapter
    Mounting hardware
    Stylus guard
    Low Tracking Force
    Minimizes wear on your irreplaceable vinyl collection

Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.

• Type: MM
• Fixing: P-mount
• Output voltage: 5,0mV bei 1kHz, 5cm/sec.
• Amplifier-connection: Phono MM
• Frequency range: 20-18.000Hz
• Material: diamond, bonded
• Stylus type: elliptical 0.4 x 0.7 mil
• Tracking force range: 0,75-1,5g
• Tracking force, recommended: 1,25g
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 200-300pF
• Weight: 7,3g*

The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing

Features:

The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile.  The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges.  The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.