Content | Original STANTON D-71EE D 71EE D71EE Floating Needle Stylus New item in original case. STANTON stylus for automatic turntable.
The Original Stanton D-71EE D71EE stylus is typically used with the Stanton L 720 EE phono cartridge and as an upgrade high fidelity stylus for the Stanton 500 (its many versions) and Pickering V-15 and XV-15 phono cartridges. The stylus features a highly polished special elliptical diamond with .0003 x .0007 inch scanning and tracing radii for precision tracing of record grooves, long playing life and vividly rich rendition of voice and music. The stylus is packaged in the original Stanton plastic cube box. Made in USA
For an alternative stylus replacement, refer to the Related Products.
Stanton D-71EE Stylus Specifications
- Frequency Response: 10Hz-20kHz
- Output @ 1kHz: 3.2mV
- Channel Separation @ 1 kHz: 35dB
- Channel Balance @ 1 kHz: within 2dB
- Tracking Force: 0.75 to 1.5 grams
- Stylus Tip: Elliptical 0.3 x 0.7 mil
- DC Resistance: 535 ohms
- Inductance: 400 mH.
- Cartridge Weight: 0.6 grams
- Recommended Load: 47k ohms
- Fits the following models:
- Stanton L 720 EE, L-725E
- Pickering DE Stylus, V-15/TE, TE-15 TE15 Cartridge
- D 71EE Stylus stanton or Pickering Elliptical Diamond
- Stanton D70E, D71-2E, D71EE, D71E, D-57P
- Cartridges: 521EEp, L717E, 996EE, HT-110E, L-91, L-92, L720EE, L725E, MMPMK11, P-14A, P-30, P-65E, P-66, P-666E, PL-10E, 100, PMT-ONE, PRO-16, PRO-216, PRO-2000, PRO-3000, PRO-EE, PRO-MIXER 1800, SL-21, PLUS SL21, PLUS SL-50, SL50, STUDIO-P
- Pickering DE Stylus, V-15/TE, TE-15 TE15 Cartridge
Made in USA | Genuine Original Stylus for OM 30, OM 30 Super, OMP30, LM 30, Concorde 30, TM 30H
Nude Fine Line
Interchangeability/Upgrade Group: A | Stylus 2M Black
Technical data |
|
Frequency range |
20-31.000 Hz |
Frequency response |
20-20.000 Hz + 2 / - 0 dB |
Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
Compliance, dynamic, lateral |
22 µm/mN |
Stylus type |
Nude Shibata |
Stylus tip radius |
r/R 6/50 µm |
Tracking force range |
1,4-1,7 g (14-17 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
2M Black |
*) Typical value |
Ortofon 530MKII Stylus Technical Data
Frequency range 20-25.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 30 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 530 Mkll, 530, 530 P |
|
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
| DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
Reviews
There are no reviews yet.