| Content |
In creating the ST.150-M2, Stanton went back to basics while re-engineering this turntable from the ground up. With everything professional DJs need - and nothing they don't - the ST.150-M2 (standard S shaped tone arm) is built to the highest possible standards. ST.150-M2 is feedback-resistant, durable constraction with industry-leading torque motor - up to 4.5 Kgf-cm, complemented by an ultra-stable platter and tone arm. With additional features including up to 50% pitch adjustment, reverse, and S/PDIF digital outputs, the ST.150-M2 combine 21st century innovation with Stanton's 70-year legacy of excellence.
Features:
- Direct drive turntable featuring motor torque up to 4.5kg
- Heavy-duty aluminum construction, with very low resonance base 10.2 kg
- S-Curved tone arm with height fine adjust and anti-skate
- Ultra stable, damped platter
- Adjustable brake speed
- Selectable pitch control (8, 25 & 50% range) with Quartz Lock
- Speed 33.45 and 78 including Reverse
- Removable target light and adjustable shock-absorbtion feet
- Selectable Phono or Line RCA Outputs
- Slip mat, 45 adapter, and right-angled cable included
- Cartridge not included
- Full version od Deckadance DVS Software included
| Audio-Technica AT-LP140XP BL, Direct Drive Turntable, professional turntable, manual, high-performance direct drive motor, anti-resonance / shock mount die-cast aluminium platter, selectable 33/45/78 RPM speeds, S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest, forward / reverse operation and variable pitch control with quartz speed lock, adjustable pitch range: +/-8 %, +/-16 %, +/- 24 %, stroboscopic platter with speed indicator, popup stylus target light, accessories Included: AT-XP3 phono cartridge, AT-HS6 headshell, dual RCA (male) to dual RCA (male) cable with ground wire, counterweight, felt mat, dust cover, 45 RPM adapter, plug-type stylus target light, colour: black
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Professional anti-resonance, mass-damped, die-cast aluminium platter
- Including AT-XP3 cartridge with AT-HS6 universal half inch-mount headshell
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½“-mount headshell.
Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.
Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque servo motor with speed stabilization
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
- AT-HS6 universal ½“-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
- Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
- Dedicated phono-level output (5.5 mV)
- Stroboscopic platter with speed indicator
- Forward/reverse operation and variable pitch control with quartz speed lock
- Retractable plug-type target light for easier cueing in low light
- Damped base construction for reduced low-frequency feedback coloration
- Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover.
| Cartridge & Stylus |
| Model |
AT-XP3 |
| Type |
VM Dual Magnet |
| Output Voltage |
5.5 mV (@ 1.0 kHz, 5cm/sec) |
| Vertical Tracking Force Range |
2.0 to 4.0 g (standard 3.0 g) |
| Stylus Shape |
Conical |
| Stylus Size |
0.6 mil |
| Recommended Load Impedance |
47,000 ohms |
| Weight |
6.2 g |
| Headshell |
| Model |
AT-HS6 |
| Weight |
9 g |
| Tone arm |
| Type |
Balanced S-shaped tonearm with detachable headshell |
| Effective Length |
230.5mm |
| Overhang |
16mm |
| Maximum Tracking Error Angle |
Less than 3 degree |
| Applicable Cartridge Weight |
3.5 - 8.5 g |
| Anti-skating Range |
0-4 g |
| Turntable |
| Drive Method |
Direct drive |
| Type |
3-speed, fully manual operation |
| Motor |
High-torque DC motor |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Pitch Variation |
+/-8% or +/-16% or +/-24% |
| Turntable Platter |
Die-cast aluminium |
| Starting Torque |
2.2 kgf-cm |
| Wow and Flutter |
50 dB |
| Output Level |
5.5 mV nominal at 1 kHz, 5 cm/sec |
| Power Supply Requirements |
115/230V AC, 60/50 Hz |
| Power Consumption |
4.3 W |
| Weight |
10.0 kg |
| Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.
Included Accessories
Slip mat
Dust cover with jacket stand
Adapter for 45 EP records
Head shell (with cartridge)
Balance and shell weights
Audio conversion cord:
• 1 Stereo pin plug (female)
• 1 Stereo mini plug (male)
USB cord
Specifications
Width: 450 mm
Height: 159 mm
Depth: 368 mm
Weight: 10.7 kg
Turntable
Drive Method: Servo-type direct drive
Platter: Aluminium, die-casting diameter: 332 mm
Motor: 3-phase, brushless DC motor
Braking System: Electronic brake
Rotation Speed: 33⅓, 45, 78 rpm
Rotation Adjustment Range: ±8 %
Wow and Flutter:
Signal-to-Noise Ratio: 50 dB
Starting Torque: > 1.6 kgf・cm
Start Time: Within 1 sec (at 33⅓ rpm)
Tone Arm
Arm Type
• Universal type S-shape tone arm
• Gimbal-supported type bearing structure
• Static balance type
Overhang: 16 mm
Effective Length: 230.5 mm
Tracking Error: Within 3°
Height Adjustment Range: 6 mm
Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
Proper Cartridge Weight:
Cartridge type: VM
Terminals
Outputs: 1 PHONO/LINE (RCA)
USB: 1 USB B port |
- Type: direct drive turntable
- Drive: quartz-driven high-torque direct drive
- Motor: 8-pol., 3-phase, brushless DC motor
- Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 rpm)
- Starting torque: > 1.8 kg/cm
- Brake time: < 1 sec.
- Start-up / rpm change: < 1 sec.
- Wow and flutter: < 0.2 % WRMS
- Signal-to-noise ratio: > 50 dB (DIN-B)
- Brake system: electronic brake
Platter:
- Material: aluminium die-cast
- Diameter: 332 mm
| Reloop RP-7000 MK2 Overview
The silver RP-7000 MK2 Upper Torque Turntable System from Reloop features a direct-drive motor and rugged construction. It is resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality silver metalic finish. The RP-7000 MK2 features a statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism. The tonearm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tonearm comes with a universal connection for pickup cartridge systems (SME).
The aluminum LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has been integrated to facilitate a vertical setup (battle position) and by using the buttons on the system's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.
Furthermore, using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range ±8%. However, the RP-7000 MK2 is also capable of a wider, DJ-friendly ±16% pitch range and a massive ±50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals.
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. In addition, the turntable break speed (platter stop) can be adjusted from 0.2 to 6 seconds and the precision-machined, heavy die-cast aluminum platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.
- Rigid chassis construction with heavier design and additional reinforcements out of metal, rubber, and molding compound for high-vibration damping and isolation
- Powerful starting torque (adjustable from 2.8 - 4.5kg/cm)
- Fine-tuned motor control for further optimization of wow and flutter and rotation
- Height-adjustable tonearm base (VTA) and anti-skating control
- Satin aluminum material used for tonearm
- Adjustable pitch scale for precise adjustments
- Easily replaceable, freely rotatable LED needle light in aluminum design
- Quartz driven DJ turntable with upper-torque direct drive
- Adjustable stop speed (0.2 to 6 seconds)
- Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
- Precision manufactured, die-cast aluminum turntable
- Rubber inlays to reduce vibrations and background noise
- Static-balance universal S-shaped tonearm with hydraulic lift and anti-skating mechanism
- Universal connection for pickup systems (SME)
- Pitch range ±8%, ±16%, ±50%
- Additional start/stop button for vertical positioning
- Reverse Function: switch for forward and reverse operation
- Recessed connection cavity for easy installation in cases & seamless adjustment
- Phono and line out (no ground required)
- Removable mains and cinch cable
- Shock-absorbing feet to insulate against vibrations
| Η νέα έκδοση του θρυλικού πικάπ της Technics!
The Technics SL-1200MK7 raises the bar for direct-drive DJ turntables. It brings new digital technology to Technics\' classic SL1200 Series design. The SL-1200MK7 turntable features a new coreless motor for improved performance. It keeps the same style and feel that made the 1200 Series popular with professional DJs. The MK7 looks almost identical to previous models, the MK5 and MK6, but with a slightly more refined all-black design.
Its recessed gold-plated phono terminals help prevent damaging the outputs after you\'ve detached the RCA cables. Its redesigned digital motor control enhances performance. The SL-1200MK7\'s starting torque and brake speed can be customized to suit your style. Its reverse function play lets you expand your creativity, while its digital pitch control delivers improved tracking and accuracy. The Technics SL-1200MK7 is no ordinary record player. It is aimed squarely at professional DJs.
The SL-1200MK7 has rock-solid build quality and feel. Weighing in at 9.6 Kg , this pro-grade record player features a chassis whose top plate is cast from aluminum. The bottom half is molded from robust ABS and fiberglass. The result is maximum stability and vibration damping.
Technics\' pedigree in the world of direct-drive turntables is undeniable. It released the world\'s first direct-drive turntable in 1970. The SL-1200 turntable became a favorite of early hip-hop DJs. They took advantage of its quick start-up time and high-torque motor to perfect scratching and other turntablism moves. The Technics SL-1200 turntable became a fixture in virtually every DJ booth and recording studio around the world.
The Technics SL-1200MK7 offers high performance for demanding DJs. It aims to live up to the reputation for reliability you\'ve come to expect from Technics over the past four decades.
- new 2019 model of Technics legendary SL-1200 series DJ turntable, which has been out of production since 2010
- NOT OEM: all original design + new parts were cast for this turntable by Technics
- inherits the familiar look, feel, and functionality of previous SL-1200 models
- newly designed coreless direct drive motor for higher torque, super-stable rotation
- plays at 33 ⅓ / 45 / 78 RPM w/ ±8%/±16% pitch adjustment
- detachable RCA + power cord
- improved vibration damping platter w/ iconic side strobe dots
- precision S-shaped tonearm w/ Technics headshell (cartridge not included)
- single colorway, all matte black finish
TECH SPECS
- drive method: direct drive
- turntable speeds: 33 1/3, 45 RPM (with switch 78 rpm)
- starting torque: 0.18mm / 1.8kg･cm (1.56 lbs)
- adjustable starting torque + breaking speed
- new reverse play function
- wow + flutter: 0.025% W.R.M.S.
- turntable platter: aluminum die-cast / diameter: 332mm (13 5/64“)
- tonearm type: S-shaped universal, static balance
- effective length: 230mm (9 1/16“)
- overhang: 15mm (19/32“)
- headshell weight: ~7.6g
- dimensions: 17-27/32 × 6-21/32 × 13-29/32" / 453 x 169 x 353mm
- weight: 21.21 lbs / 9.6kg
COMES WITH
- Technics slipmat + slipsheet
- dustcover
- 45 adaptor
- screw set for cartridge
- RCA cable
- grounding cable
- power cord
|
Reviews
There are no reviews yet.