STEWART ADB1 ACTIVE D.I BOX

164.56 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Stewart ADB-1 is a single channel active direct box that allows an unbalanced source to directly feed a balanced input. Musical instruments, tape recorders, VCRs and sound projectors can be run “direct” to the mixing console, avoiding unnecessary degradation of sound quality. The ADB-1 operates on either phantom power or a 9-volt battery. FEATURES:Flat […]

 

Read more

The Stewart ADB-1 is a single channel active direct box that allows an unbalanced source to
directly feed a balanced input. Musical instruments, tape recorders, VCRs and sound projectors
can be run “direct” to the mixing console, avoiding unnecessary degradation of sound quality.
The ADB-1 operates on either phantom power or a 9-volt battery.

FEATURES:
Flat response
Low distortion
Low noise
Wide dynamic range
No transformer
RF protection on input and output
Switchable ground isolation
Flush mounted slide switches

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “STEWART ADB1 ACTIVE D.I BOX”

Your email address will not be published. Required fields are marked *

Quick Comparison

STEWART ADB1 ACTIVE D.I BOX removePALMER AUDIO PAN01 Passive DI-box removeDOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- removeLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removeOMNITRONIC LH-060 2-channel DI box/splitter, passive removeALPHATON IA-2 INLINE TRANSFORMER XLRf-m W-GROUNDLIFT remove
NameSTEWART ADB1 ACTIVE D.I BOX removePALMER AUDIO PAN01 Passive DI-box removeDOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- removeLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removeOMNITRONIC LH-060 2-channel DI box/splitter, passive removeALPHATON IA-2 INLINE TRANSFORMER XLRf-m W-GROUNDLIFT remove
Image
SKUADB1EPAN01275LDI02LH060IA-2
Rating
Price 164.56 incl. GR VAT 52.07 incl. GR VAT 73.93 incl. GR VAT 58.64 incl. GR VAT 73.35 incl. GR VAT 119.04 incl. GR VAT
Stock

Available on backorder

Only 5 left in stock (can be backordered)

In stock

Only 5 left in stock

Available on backorder

In stock

AvailabilityAvailable on backorderOnly 5 left in stock (can be backordered)In stockOnly 5 left in stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Stewart ADB-1 is a single channel active direct box that allows an unbalanced source to
directly feed a balanced input. Musical instruments, tape recorders, VCRs and sound projectors
can be run "direct" to the mixing console, avoiding unnecessary degradation of sound quality.
The ADB-1 operates on either phantom power or a 9-volt battery.

FEATURES:
Flat response
Low distortion
Low noise
Wide dynamic range
No transformer
RF protection on input and output
Switchable ground isolation
Flush mounted slide switches

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.

Product type DI Boxes
Type passive
Channels 1
Inputs 1
Input connectors 6.3 mm Jack
Max. input level + 54 dBu
Input impedance (@ 60 Hz) 60k Ohm(s)
Input pad 0 / -30 dB
Outputs 1
THRU outputs/channel 1
Output connectors 6.3 mm Jack , XLR
Max. output level + 4 dBu
Output impedance 600 Ohm(s)
Frequency response 20 - 20000 Hz
Transformer balanced yes
Ratio 10 : 1
Controls attenuator , ground lift
Cabinet material sheet steel
Cabinet surface powder coated
Width 110 mm
Depth 73 mm
Height 42 mm
Weight 0,34 kg

 

DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand-

The AC 275 is an active, phantom powered direct box. Unlike a passive DI where the frequency response of the signal can be altered depending on the connected impedance, an active DI buffers the input signal with an amplifier. This assures that the sound source will reach the mixer balanced and noise-free.

Housed in a cast alloy chassis, the AC 275 supplies two, high impedance, unbalanced 1/4" jacks and one low impedance balanced XLR jack. It operates with battery or phantom power.


Key Features
?

Active direct box

?

Allows a hi impedance unbalanced source to directly feed a low impedance balanced input

?

Flat frequency response

?

Connects guitar pickups, microphones or electric instruments to a recording or P.A. console without audio quality loss

?

Internal pad for speaker level input

?

Operates with battery or phantom power

?

Ground lift switch eliminates typical ground loop problems

?

Rugged, road-proof cast alloy chassis

pdf User´s Manual LD Systems LDI02 DI Box active Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THD
Indicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg

2-channel DI box/splitter, passive Converts 2 separate unbalanced line inputs (e.g. instruments) into 2 balanced XLR outputs for connecting a mixer Switchable to split mode (input 1 routes the signal to both outputs) Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 2 signal inputs via XLR/jack combo connectors 2 low-impedance XLR outputs Modern convex housing design Full rubber housing corners for safe operation Cables can be routed under the housing

Inline Transformer IA-2

The model IA-2 line matching transformers !S designed to properly match a low impedance
signal to a low impedance source. The advantage of "ground lift" switching allows to optmize
hum problems.
 
Technical Data
Frequency response 20 Hz - 20 KHz + 1 dB
Impedance 600 : 600 Ohm
THD K3 50 Hz = 0.5 %
Level < + 6 dBm
Weight 100 g
Dimensions diameter 17 mm, lenght 115 mm
 

Weight0.50 kg0.34 kg2.50 kg0.70 kg0.70 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.34 kg
Weight 2.50 kg
Weight 0.70 kg
Weight 0.70 kg
Weight 0.10 kg