T-REX Replicator Tape Echo Pedal

598.99 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: G05TR00008 Category:
REPLICATOR TAPE ECHO There once was a time when a ”bucket brigade” was a handful of firemen and digital processing was only used by computers the size of a house. Echo effects were largely done by using magnetic tape run by a motor – it was such a cool sounding concept, but the size, weight […]

 

Read more

REPLICATOR TAPE ECHO

There once was a time when a ”bucket brigade” was a handful of firemen and digital processing was only used by computers the size of a house. Echo effects were largely done by using magnetic tape run by a motor – it was such a cool sounding concept, but the size, weight and ease of use was always a challenge for the players.
That was then, this is now!
The Replicator is T-Rex Engineering´s take on the ultimate tape echo unit, complete with a motor, magenetic heads and a tape cartridge. The goal was to make a tape echo unit that could nail the sound quality of the old echo units, but surpass them in features. Size, ease of use and super-fast tape replacing were obvious areas of improvement, but we also put in tap tempo, two playback heads for three output modes and a chorus mode that modulates the pitch of the echos.
 

Two expression pedal inputs allow the player to control delay time and feedback in real time for instant synth-noise at your feet.
The tape cartridge (available seperately) can be replaced in seconds and the high headroom of the circuit will allow you to use this pedal for processing line signals as well (keyboards, P.A. aux sends, preamps, etc.).
The difference between a super precise, accurate digital echo and the Replicator is that there is a certain amount of unpredictability in the sound of tape. It has its own life, almost. And that personality translates into a very natural sounding echo that we think feels more like an instrument than a sound effect.

HANDCRAFTED IN DENMARK

  • 100% analog signal 
  • True bypass 
  • Two playbackheads for three modes of operation 
  • Tap tempo 
  • Kill dry switch 
  • Expression pedal control of time and feedback

 

 

Application:

Εl.Guitar
Type: Single
Effect: Delay
Signature: No

 

Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “T-REX Replicator Tape Echo Pedal”

Your email address will not be published. Required fields are marked *

Quick Comparison

T-REX Replicator Tape Echo Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal removeBOSS FZ-5 PEDAL LEVEL-MODE-FUZZ removeBOSS CE-5 CHORUS ENSEMBLE Pedal removeDIGITECH XHP 7-MODE PHASER removeEVENTIDE MODFACTOR MODULATION EFFECT/PEDAL remove
NameT-REX Replicator Tape Echo Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal removeBOSS FZ-5 PEDAL LEVEL-MODE-FUZZ removeBOSS CE-5 CHORUS ENSEMBLE Pedal removeDIGITECH XHP 7-MODE PHASER removeEVENTIDE MODFACTOR MODULATION EFFECT/PEDAL remove
Image
SKUG05TR00008E007855690.ROL.030BOS.1575.0009XHPMODFACTOR
Rating
Price598.99 incl. GR VAT42.00 incl. GR VAT 137.63 incl. GR VAT117.79 incl. GR VAT 52.00 incl. GR VAT 470.68 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

REPLICATOR TAPE ECHO

There once was a time when a ”bucket brigade” was a handful of firemen and digital processing was only used by computers the size of a house. Echo effects were largely done by using magnetic tape run by a motor – it was such a cool sounding concept, but the size, weight and ease of use was always a challenge for the players.
That was then, this is now!
The Replicator is T-Rex Engineering´s take on the ultimate tape echo unit, complete with a motor, magenetic heads and a tape cartridge. The goal was to make a tape echo unit that could nail the sound quality of the old echo units, but surpass them in features. Size, ease of use and super-fast tape replacing were obvious areas of improvement, but we also put in tap tempo, two playback heads for three output modes and a chorus mode that modulates the pitch of the echos.
  Two expression pedal inputs allow the player to control delay time and feedback in real time for instant synth-noise at your feet.
The tape cartridge (available seperately) can be replaced in seconds and the high headroom of the circuit will allow you to use this pedal for processing line signals as well (keyboards, P.A. aux sends, preamps, etc.).
The difference between a super precise, accurate digital echo and the Replicator is that there is a certain amount of unpredictability in the sound of tape. It has its own life, almost. And that personality translates into a very natural sounding echo that we think feels more like an instrument than a sound effect.

HANDCRAFTED IN DENMARK

  • 100% analog signal 
  • True bypass 
  • Two playbackheads for three modes of operation 
  • Tap tempo 
  • Kill dry switch 
  • Expression pedal control of time and feedback
    Application:

Εl.Guitar
Type: Single
Effect: Delay
Signature: No
 
 

VINTAGE TUBE OVERDRIVE TO800

What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain

Vintage Tube-Like Tone

In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.

Ease of Use

Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
  • Get vintage overdrive, smooth sustain and screaming fat tone
  • Perfect for guitar; great for bass and keyboards, too
  • Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
  • Captures every nuance of your playing from smooth overdrive to screaming tube sounds
  • Dedicated Drive, Tone and Level controls for awesome sound shaping
  • Status LED for effect on/off and battery check
  • Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
  • Rugged electronic On/Off switch for noise-free operation
The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
  • Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
  • Uses advanced COSM technology to recreate classic fuzz
  • BOOST control for more aggressive tone
  • Road-tough BOSS metal construction
Nominal Input Level -20 dBu
Input Impedance 1 M ohm
Nominal Output Level -20 dBu
Output Impedance 1 k ohm
Recommended Load Impedance 10 k ohms or greater
Controls Pedal switch, LEVEL knob, FUZZ knob, MODE knob
Indicator CHECK indicator (Serves also as battery check indicator)
Connectors INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V)
Power Supply DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)
Current Draw 36 mA (DC 9 V)
Expected battery life under continuous use Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use.
Accessories Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61)
Options AC Adaptor (PSA series)
Size and Weight
Width
73 mm 2-7/8 inches
Depth
129 mm 5-1/8 inches
Height
59 mm 2-3/8 inches
Weight
440 g 1 lbs.

Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.

 

 

Input Impedance1 M ohms
Output Impedance1 k ohms
Recommended Load Impedance10 k ohms or greater
Residual Noise Level-93 dBu (IHF-A, Typ.)
ConnectorsINPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V)
Power SupplyDC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
Current Draw22 mA (DC 9 V)
AccessoriesDry Battery 9 V type (6F22/9 V)
OptionAC Adaptor (PSA-Series)
Size and Weight ( incl. battery )
Width
73 mm2-7/8 inches
Depth
129 mm5-1/8 inches
Height
59 mm2-3/8 inches
Weight
410 g0 lbs. 15 oz.

 

The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.

The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.

The main features of the Digitech XHP HYPER PHASE include:

  • Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
  • 7 Different phase types
  • Speed, Depth, Regen, and Mode controls
  • Triggering and step capability
  • Stereo outputs with switchable CIT Cabinet Modeling
Studio Quality Effects at Your Feet Premier recording studios worldwide use Eventide on hit after hit.  ModFactor features Eventide's 27 best modulation effects without compromising quality OR flexibility. Flexibility Built-In Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals. Obsolescence is so 20th Century Easy to upgrade; download new software from the Internet and install via USB. Features
  • 27 of Eventideʼs signature stereo or mono effects:
    • Liquid Chorus
    • Shimmer Chorus
    • Organic Chorus
    • Negative Phaser
    • Postive Phaser
    • BiPhase Phaser
    • Feedback Phaser
    • WahWah Q-Wah
    • Voc-Wah Q-Wah
    • Positive Flanger
    • Negative Flanger
    • Jet Flanger
    • Thru-o Flanger
    • Lowpass ModFilter
    • HiPass ModFilter
    • BandPass ModFilter
    • Standard Rotary
    • Giant Rotary
    • Bias Tremolo
    • Opto Tremolo
    • Modern Vibrato
    • Vintage Vibrato
    • Retro Vibrato
    • Pitch Undulator
    • Feedback Undulator
    • Ring (DC) Ringmod
    • String (AC) Ringmod
  • Studio quality sound
  • Software upgradeable via USB 2.0
  • MIDI control via USB or MIDI in, out/thru
  • Instant program change
  • Real-time control with 10 knobs, MIDI, or expression pedal
  • Tap tempo and MIDI clock sync
  • 40 factory presets, unlimited through MIDI
  • True analog bypass
  • Rugged cast metal construction
  • Reliable metal footswitches for instant preset access
  • Mono or stereo operation
  • Guitar or line level inputs and outputs
SPECIFICATIONS:
Analog Input/Output
Input impedance 500K ohms
Output Impedance 470 ohms
Recommended Load Impedance 10K ohms or greater
Connectors
Input 1 (mono) ¼ inch mono phone jack
Input 2 ¼ inch mono phone jack
Output 1 (mono) ¼ inch mono phone jack
Output 2 ¼ inch mono phone jack
Expression Pedal ¼ inch mono phone jack
Aux Switch ¼ inch stereo phone jack
USB Type B Socket. Use 2.0 cables only.
MIDI In Five pin DIN (Female)
MIDI Out/Thru Five pin DIN (Female)
AC Adapter Jack Power Supply included (see below)
Physical
Power 9 VDC, 1200 mA, Tip hot (+)
Dimensions English: 4.8" (H) x 7.5" (W) x 2.12" (D) Metric: 122 (H) x 190 (W) x 54 (D) mm
Weight 2.15 lbs, 1kG
Weight3.00 kg0.50 kg0.44 kg0.41 kg1.00 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 0.50 kg
Weight 0.44 kg
Weight 0.41 kg
Weight 1.00 kg
Weight 1.00 kg