TANNOY REVEAL-5A ACTIVE STUDIO MONITOR

Discontinued

188.58 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Reveal 5A The new Tannoy Reveal 5A active near field monitor builds upon the success and recording industry reputation of the famous original Tannoy Reveal Active. When launched in the mid nineties, the Reveal Active was widely recognised as the product that defined the category and has been the active monitor of choice for thousands […]

 

Read more

Reveal 5A
The new Tannoy Reveal 5A active near field monitor builds upon the success and
recording industry reputation of the famous original Tannoy Reveal Active. When
launched in the mid nineties, the Reveal Active was widely recognised as the product
that defined the category and has been the active monitor of choice for thousands of
amateur and professional recording, creative composition and postproduction facilities
worldwide.

MAIN FEATURES
From the front:
40mm MDF sculpted baffle ? stiff, heavy and rigid and minimises diffraction.
Recessed drive units flush with the baffle surface ? minimises diffraction.
10 point fixing maximises contact between drive unit and baffle.
Bass unit development using Klippell? analysis equipment to minimise offsets
and linearise the suspension components.
New tweeter has wide band design extending the amplitude response beyond
20kHz audibility to 30kHz to correct the phase response from 8kHz to 14kHz
within the audible band. This preserves the harmonic structure of sounds and
the stability of the stereo image .
Smooth tweeter faceplate contours prevent diffraction and cavity effects.
On/Mute (energy saving mode) via the Tannoy logo push switch.
LED indicator shows Active/Energy Saving modes.
Front mounted volume control for convenient Home Studio and PC/MAC
laptop/desktop use.
From the sides:
18mm MDF cabinet construction provides stiffness and minimises colouration.
Internal construction braces the sides and rear of the cabinet against the rear of the
bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures
fast tight bass response and clear midrange.
Front baffle and rear panel tongued and grooved into the cabinet as a mechanical
interlock for safety if wall mounted.
From the rear:
Double insulated to prevent ground loops ? no safety earth required.
CSA/CE/CCC/CB full safety approvals including China.
Spare fuse in IEC mains connector.
On/Off mains isolator switch.
Substantial heat sinking for long term cool running and 24/7 reliability.
XLR and _? jack Combi connector for balanced input.
 
TECHNICAL SPECIFICATIONS
PERFORMANCE 
Frequency response (1) 65Hz to 30kHz
Max SPL (2)  109dB
Distortion

Weight 11.00 kg

Reviews

There are no reviews yet.

Be the first to review “TANNOY REVEAL-5A ACTIVE STUDIO MONITOR”

Your email address will not be published. Required fields are marked *

Quick Comparison

TANNOY REVEAL-5A ACTIVE STUDIO MONITOR removeRCF MYTHO 6 ACTIVE TWO-WAY 6.5" DSP MONITORING SYSTEM removeADAM A77X Active Studio Monitor 100W removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeADAM A8X Active Studio Monitor 150W remove
NameTANNOY REVEAL-5A ACTIVE STUDIO MONITOR removeRCF MYTHO 6 ACTIVE TWO-WAY 6.5" DSP MONITORING SYSTEM removeADAM A77X Active Studio Monitor 100W removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeADAM A8X Active Studio Monitor 150W remove
Image
SKUREVEAL-5AMYTHO6A77XTwin6 BeE005320A8X
Rating
Price 188.58 incl. GR VAT 861.79 incl. GR VAT 1,175.00 incl. GR VAT1,675.00 incl. GR VAT 119.00 incl. GR VAT 1,045.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Reveal 5A
The new Tannoy Reveal 5A active near field monitor builds upon the success and
recording industry reputation of the famous original Tannoy Reveal Active. When
launched in the mid nineties, the Reveal Active was widely recognised as the product
that defined the category and has been the active monitor of choice for thousands of
amateur and professional recording, creative composition and postproduction facilities
worldwide.

MAIN FEATURES
From the front:
40mm MDF sculpted baffle ? stiff, heavy and rigid and minimises diffraction.
Recessed drive units flush with the baffle surface ? minimises diffraction.
10 point fixing maximises contact between drive unit and baffle.
Bass unit development using Klippell? analysis equipment to minimise offsets
and linearise the suspension components.
New tweeter has wide band design extending the amplitude response beyond
20kHz audibility to 30kHz to correct the phase response from 8kHz to 14kHz
within the audible band. This preserves the harmonic structure of sounds and
the stability of the stereo image .
Smooth tweeter faceplate contours prevent diffraction and cavity effects.
On/Mute (energy saving mode) via the Tannoy logo push switch.
LED indicator shows Active/Energy Saving modes.
Front mounted volume control for convenient Home Studio and PC/MAC
laptop/desktop use.
From the sides:
18mm MDF cabinet construction provides stiffness and minimises colouration.
Internal construction braces the sides and rear of the cabinet against the rear of the
bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures
fast tight bass response and clear midrange.
Front baffle and rear panel tongued and grooved into the cabinet as a mechanical
interlock for safety if wall mounted.
From the rear:
Double insulated to prevent ground loops ? no safety earth required.
CSA/CE/CCC/CB full safety approvals including China.
Spare fuse in IEC mains connector.
On/Off mains isolator switch.
Substantial heat sinking for long term cool running and 24/7 reliability.
XLR and _? jack Combi connector for balanced input.
 
TECHNICAL SPECIFICATIONS
PERFORMANCE 
Frequency response (1) 65Hz to 30kHz
Max SPL (2)  109dB
Distortion

MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.

Acoustical Specifications
Frequency Response -3 dB:40 Hz÷ 20 kHz
Max SPL:114 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:6.5" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1900 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:370/14.5 mm/inch 
Width:265/10.4 mm/inch 
Depth:250/9.8 mm/inch 
Net Weight:10.5/23 Kg/Lbs

 

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

Subwoofer
Number1 / 1
Basket Ø7" (175 mm) / 7" (175 mm)
Voice coil Ø1.5" (38 mm) / 1.5" (38 mm)
Cone materialCarbon / rohacell / glass / Carbon / rohacell / glass
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
LocationRear
General data
PanelFront
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥114 dB
Max. peak≥122 dB
Crossover frequencies400 / 3000 Hz
Input impedance30 KOhm
Weight28.2 lb (12,8 kg)
Magnetically shieldedOptional
Height x Width x Depth9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)
Warranty5 Years

 

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors

OVERVIEW

The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.

The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.

Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.

Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.

 FEATURES

  • 2-Way active studio monitor pair
  • Ideally suited for computer studios, multimedia workstations and keyboards
  • Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
  • Powerful woofers and high-resolution tweeters
  • High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
  • Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
  • Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
  • Individual volume controls for both Line inputs plus Bass and Treble EQ controls
  • 1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel

SPECIFICATIONS

MS20 Digital Monitor Speakers (Pair)

  • Loudspeakers
    Tweeter: ˜ 65 mm (2 1/2“), 8 ?
    Woofer: ˜ 92 mm (3 5/8“), 4 ?
    Audio Inputs
    Line 1: 1/8" TRS stereo, impedance 20 k?
    Line 2: 2 RCA, impedance 20 k?
    Digital Inputs
    Optical: TOSLINK
    Coaxial: RCA
    Converter: 24-bit
    Sample rate: System Specs
    Output power: 2 x 20W
    Frequency response: 50Hz to 25kHz
    Power Supply
    Mains Voltages: USA/Canada 120 V, 60 Hz
    Power Consumption: 80W
   

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



Weight11.00 kg12.00 kg13.00 kg14.00 kg6.00 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.00 kg
Weight 12.00 kg
Weight 13.00 kg
Weight 14.00 kg
Weight 6.00 kg
Weight 13.00 kg