Content |
Reveal 5A
The new Tannoy Reveal 5A active near field monitor builds upon the success and
recording industry reputation of the famous original Tannoy Reveal Active. When
launched in the mid nineties, the Reveal Active was widely recognised as the product
that defined the category and has been the active monitor of choice for thousands of
amateur and professional recording, creative composition and postproduction facilities
worldwide.
MAIN FEATURES
From the front:
40mm MDF sculpted baffle ? stiff, heavy and rigid and minimises diffraction.
Recessed drive units flush with the baffle surface ? minimises diffraction.
10 point fixing maximises contact between drive unit and baffle.
Bass unit development using Klippell? analysis equipment to minimise offsets
and linearise the suspension components.
New tweeter has wide band design extending the amplitude response beyond
20kHz audibility to 30kHz to correct the phase response from 8kHz to 14kHz
within the audible band. This preserves the harmonic structure of sounds and
the stability of the stereo image .
Smooth tweeter faceplate contours prevent diffraction and cavity effects.
On/Mute (energy saving mode) via the Tannoy logo push switch.
LED indicator shows Active/Energy Saving modes.
Front mounted volume control for convenient Home Studio and PC/MAC
laptop/desktop use.
From the sides:
18mm MDF cabinet construction provides stiffness and minimises colouration.
Internal construction braces the sides and rear of the cabinet against the rear of the
bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures
fast tight bass response and clear midrange.
Front baffle and rear panel tongued and grooved into the cabinet as a mechanical
interlock for safety if wall mounted.
From the rear:
Double insulated to prevent ground loops ? no safety earth required.
CSA/CE/CCC/CB full safety approvals including China.
Spare fuse in IEC mains connector.
On/Off mains isolator switch.
Substantial heat sinking for long term cool running and 24/7 reliability.
XLR and _? jack Combi connector for balanced input.
TECHNICAL SPECIFICATIONS
PERFORMANCE
Frequency response (1) 65Hz to 30kHz
Max SPL (2) 109dB
Distortion |
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
Specifications Frequency response (+/-3dB) : | 55Hz - 28kHz | Maximum SPL : | 107dB SPL (peak @ 1m) |
Input :
|
Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA
| HF amplifier stage : | 50W RMS, class AB | LF amplifier stage : | 80W RMS, class AB |
Electric supply :
|
Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord
|
Adjustment :
|
- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch
|
Indicators :
|
Power ON / OFF LED
Standby / ON LED
Audio Clip LED
| Woofer : | 5" Focal drive unit, Polyglass cone | Tweeter : | Aluminum/Magnesium inverted dome Focal tweeter | Shielding : | Integral by cancellation magnet | Construction : | Reinforced and damped Aluminum cabinet |
Finish :
|
Black powder cabinet
| Dimensions with spikes : | 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“) | Dimensions with table stand : | 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“) | Net weight : | 7.7kg - (17lb) |
|
PRICE PER UNIT A revolutionary formula: 2 x 7 = 77 In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line. The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring. Driver technology Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels. The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Review samples: “… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012 “… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012 Subwoofer | | Number | 1 / 1 | Basket Ø | 7" (175 mm) / 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) / 1.5" (38 mm) | Cone material | Carbon / rohacell / glass / Carbon / rohacell / glass | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | Location | Rear | General data | | Panel | Front | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥114 dB | Max. peak | ≥122 dB | Crossover frequencies | 400 / 3000 Hz | Input impedance | 30 KOhm | Weight | 28.2 lb (12,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) | Warranty | 5 Years |
|
Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors
OVERVIEW
The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.
The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.
Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.
Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.
FEATURES
- 2-Way active studio monitor pair
- Ideally suited for computer studios, multimedia workstations and keyboards
- Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
- Powerful woofers and high-resolution tweeters
- High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
- Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
- Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
- Individual volume controls for both Line inputs plus Bass and Treble EQ controls
- 1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel
SPECIFICATIONS
MS20 Digital Monitor Speakers (Pair)
- Loudspeakers
Tweeter: ˜ 65 mm (2 1/2“), 8 ?
Woofer: ˜ 92 mm (3 5/8“), 4 ?
Audio Inputs
Line 1: 1/8" TRS stereo, impedance 20 k?
Line 2: 2 RCA, impedance 20 k?
Digital Inputs
Optical: TOSLINK
Coaxial: RCA
Converter: 24-bit
Sample rate:
System Specs
Output power: 2 x 20W
Frequency response: 50Hz to 25kHz
Power Supply
Mains Voltages: USA/Canada 120 V, 60 Hz
Power Consumption: 80W
|
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications Frequency response : | 40Hz - 40kHz | Maximum SPL : | 115dB SPL (peak @ 1m) |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| Bass/mid-range : | 2x150W rms, BASH® technology | Treble : | 100W rms, AB class |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
|
Visualization and control :
|
Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector
| warning light : | Power on LED |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
| Woofer : | 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker | Tweeter : | TB871, Focal inverted dome tweeter in Beryllium | transducer shielding : | Integral through cancellation magnets or by magnet design | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body
| Dimensions (HxWxD) : | 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm) | Weight : | 30.8lb (14kg) |
|
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
Specifications Frequency response : | 40Hz - 40kHz | Maximum SPL : | 113dB SPL (peak @ 1m) |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| Bass/mid-range : | 150W rms, BASH® technology | Treble : | 100W rms, AB class |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
|
Visualization and control :
|
Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector
| warning light : | Power on LED |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
| Woofer : | 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker | Tweeter : | Focal TB871 Beryllium inverted dome tweeter | transducer shielding : | Integral through cancellation magnets or by magnet design | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body
| Dimensions (HxWxD) : | 13 x 9-7/16 x 11-7/16 " (330x240x290mm) | Weight : | 24.2lb (11kg) |
|
Reviews
There are no reviews yet.