Content |
The Tannoy Reveal 601p Main Features Include:
- Latest evolution of the original passive Reveal high definition reference monitor
- 6.5” (130mm) LF/MF driver and 1” (30mm) soft dome tweeter delivering wide frequency response of 63Hz – 30kHz
- Sculpted and rigid front baffle design to minimise diffraction
- Response has been optimised for quarter space near-field operation, such as on a meter bridge or on a table either side of your control surface
- Front firing reflex bass port to negate boundary-coupling
- 50-100W RMS Recommended Amp Power
- Bass unit development using to minimise offsets and linearise the suspension components.
- Wide-band tweeter design extending the amplitude response beyond 20kHz audibility to 30kHz to improve the phase response from within the audible band.
- + 1.5 / 0 / -1.5dB HF trim switch for custom room adjustment
- Balanced XLR and unbalanced jack connectors
|
One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.
|
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
|
One 1" pure aluminum dome tweeter.
One 6-1/2" BDSS cast basket driver pressure coupled
to one 6“x10" low bass radiator.
Freq. Response: 32 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 90 dB.
Rec. Ampl. Power: 20 - 225 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 32.9 x 20 x 31 cm.
Weight: 7 kg each.
|
This 2-way passive full range studio monitor loudspeaker which incorporates an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency transducer. The system's low frequency driver is mounted as a direct radiator in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels. The tuning port is located at the rear to minimize turbulence noise and two M6 mounting points are located on the bottom panel of the enclosure. The acoustically transparent cloth grille system is detachable.
FEATURES: 2-way near/mid-field studio monitor 8" low frequency speaker 1" aluminum dome fluid cooled tweeter LQS? waveguide for dispersion control 125 W power handling
SPECIFICATIONS: RMS (Average) Power HandlingR:125 W Program Power HandlingP:250 W Peak Power HandlingK: >500 W Recommended Amplifier:125 W to 250 W at 8 Ω On-axis Frequency RangeF:38 Hz - 33 kHz Nominal Impedance: 8 Ω Minimum ImpedanceI:3.2 Ω (at 15 kHz) On-axis Sensitivity 1W / 1 mS: 89 dB SPL Rated Peak SPL at Full Power: 116 dB Nominal -6 dB BeamwidthsB:120° Horizontal (average, 500 Hz to 8 kHz) 95° Vertical Enclosure Material:MDF with Iroko wood side panels Color:Black/Iroko wood Connectors:Binding posts Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in) Mounting:2 x M6 points Weight: 12.8 kg (28 lbs) Shipping Weight: 14 kg (31 lbs) |
One 1" pure aluminum dome tweeter.
One 5-1/4" BDSS driver.
Freq. Response: 35 Hz - 30 kHz,
Impedance: 8 Ohms,
Sensitivity: 90 dB,
Rec. Ampl. Power: 20 - 150 watts,
Inputs: One pair of 5 way binding posts.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim
Dimensions: 29.7 x 17.2 x 29.6 cm,
Weight: 5.5 kg each
|
Reviews
There are no reviews yet.