Content |
Reveal 66
The open and detailed reproduction of mid-high frequencies is further enhanced
with the inclusion of the Tannoy WideBand? high frequency unit to improve and
extend the high frequency phase response. This ensures increased tonal accuracy
of individual instruments in the reproduction process ? a mix critical factor allowing
the best EQ and placement decisions to be made.
MAIN FEATURES
From the front:
40mm MDF sculpted baffle ? stiff, heavy and rigid and minimises diffraction.
Recessed drive units flush with the baffle surface ? minimises diffraction.
New tweeter has wide band design extending the amplitude response beyond
20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz
within the audible band. This preserves the harmonic structure of sounds and
the stability of the stereo image.
Smooth tweeter faceplate contours prevent diffraction and cavity effects.
10 point fixing maximises contact between drive unit and baffle.
New design bass units have aluminium flux control rings around the voice coils
and copper caps on the pole pieces ? linearises the voice coil motional impedance
to reduce non linear (3rd order) distortion products caused by varying voice coil
inductance. (Except R5A).
Bass unit development using Klippell? analysis equipment to minimise offsets
and linearise the suspension components.
From the side:
18mm MDF cabinet construction provides stiffness and minimises colouration.
Internal construction braces the sides and rear of the cabinet against the rear
of the bass driver to provide a rigid reactive mass for the moving cone assembly.
Ensures fast tight bass response and clear midrange.
Front baffle and rear panel tongued and grooved into the cabinet as a mechanical
interlock for safety if wall mounted.
From the rear:
Simple foolproof gold plated terminal panel. No degradation due to bi-wire links
in the HF signal path.
OmniMount? friendly fixing points for wall mounting.
TECHNICAL SPECIFICATIONS
PERFORMANCE
Frequency Response (1) 60Hz to 51kHz
Recommended Amplifier Power 80 to 150W @ 8 ohm
Power Handling Average RMS (2) 80W
Power Handling Programme RMS 150W
Nominal Impedance 6 ohm
Sensitivity (3) 92dB for 1W at 1m
Distortion | Info
The first in JBLʼs new 7 Series line, the 705i and 708i models answer the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies developed for our flagship M2 Master Reference Monitor, 7 Series deliver detailed imaging, extended frequency response and remarkable output from compact enclosures. Centrally amplified and tuned, and easily installed, 705i and 708i are the heart of an elegant, scalable system for broadcast and post facilities working in immersive audio formats. |
ME 120
Enclosure Bass reflex type Power Handling Capacity Continuous pinknoise: 50W Rated Impedance 6 ohms Sensitivity 88dB (1W, 1m) Frequency Response 60 ? 18,000Hz Crossover Frequency ? Speaker Component 16cm cone-type (magnetically shielded) Input Terminals Screw terminals (compatible with a dual-banana plug), gold plated Finish Enclosure: MDF, black, paint Front grill: Cloth, black Dimensions 170 (W) ? 264 (H) ? 194 (D) mm Weight 3.6kg (per unit) Mounting Brackets (option) WCB-12, WCB-31, CMB-31 |
One 1" pure aluminum dome tweeter.
One 5-1/4" BDSS driver.
Freq. Response: 35 Hz - 30 kHz,
Impedance: 8 Ohms,
Sensitivity: 90 dB,
Rec. Ampl. Power: 20 - 150 watts,
Inputs: One pair of 5 way binding posts.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim
Dimensions: 29.7 x 17.2 x 29.6 cm,
Weight: 5.5 kg each
|
Info
The first in JBLʼs new 7 Series line, the 705i and 708i models answer the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies developed for our flagship M2 Master Reference Monitor, 7 Series deliver detailed imaging, extended frequency response and remarkable output from compact enclosures. Centrally amplified and tuned, and easily installed, 705i and 708i are the heart of an elegant, scalable system for broadcast and post facilities working in immersive audio formats.
|
Dimensions | Metric :6-15/16” W x 9-11/16” D x 10-11/16” H | 17.6 x 24.6 x 27.1 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/2" high definition bass/midrange driver pressure coupled to one 8” bass radiator
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 – 200 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Piano-Gloss Black
Included Accessories :Keyhole bracket (with 2 screws to mount to speaker)
Mounting Options :Vertically: On Shelf; On Wall with optional included keyhole bracket for flush mounting
Packaging :Two to a carton
Weight | Metric :14 lbs | 6.4 kg
Warranty :5 Years |
Reviews
There are no reviews yet.