Reveal 8D A set of DIP switches on the rear control panel of the new Reveal D Active monitors allow the selection of an optimum speaker response for real life and often difficult monitoring situations so that the frequency response at the listener?s ears is always as linear and flat as possible. Reveal monitors can […]
Reveal 8D
A set of DIP switches on the rear control panel of the new Reveal D Active monitors
allow the selection of an optimum speaker response for real life and often difficult
monitoring situations so that the frequency response at the listener?s ears is always
as linear and flat as possible. Reveal monitors can therefore be optimised for varying
listening distances in difficult acoustic spaces; varying meter bridge positions, against
and adjacent to walls or reflecting surfaces, in corners, in corners on shelves or brackets,
table top / space restricted PC/Mac based sound editing environments and stand mounted
or soffit mounted configurations.
MAIN FEATURES
From the front:
40mm MDF sculpted baffle ? stiff, heavy and rigid and minimises diffraction.
Recessed drive units flush with the baffle surface ? minimises diffraction.
New tweeter has wide band design extending the amplitude response beyond
20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz
within the audible band. This preserves the harmonic structure of sounds and
the stability of the stereo image.
Smooth tweeter faceplate contours prevent diffraction and cavity effects.
10 point fixing maximises contact between drive unit and baffle.
New design bass units have aluminium flux control rings around the voice coils
and copper caps on the pole pieces ? linearises the voice coil motional impedance
to reduce non linear (3rd order) distortion products caused by varying voice coil
inductance.
Bass unit development using Klippell? analysis equipment to minimise offsets
and linearise the suspension components.
On/Mute (energy saving mode) via the Tannoy logo push switch.
LED indicator shows Active/Energy Saving modes.
From the side:
18mm MDF cabinet construction provides stiffness and minimises colouration.
Internal construction braces the sides and rear of the cabinet against the rear
of the bass driver to provide a rigid reactive mass for the moving cone assembly.
Ensures fast tight bass response and clear midrange.
Front baffle and rear panel tongued and grooved into the cabinet as a mechanical
interlock for safety if wall mounted.
From the rear:
Double insulated to prevent ground loops ? no safety earth required.
CSA/CE/CCC/CB full safety approvals including China.
Spare fuse in IEC mains connector.
On/Off mains isolator switch.
Substantial heat sinking for long term cool running and 24/7 reliability.
XLR and 1/4? jack Combi connector for balanced input.
Switch adjacent to XLR selects digital or analogue input.
RCA input for SPDIF with 75 Ohm terminating impedance.
2nd RCA for SPDIF output for slaving a stereo pair.
Yellow LED indicator lights up when digital lock is achieved.
3-way switch selects which channel of the SPDIF stream is decoded,
marked Left/Right/Mono. Switching is post 2 channel DAC.
Trim/Gain control over +6dB/-12dB range reference 0dBV (0.775V)
input for full rated output.
Trim/Gain control works on SPDIF input post DAC.
Switch selection of 12dB/8ve 80Hz hi-pass filter for use with AV subwoofers.
First bank of 10 DIP switches controls LF alignment, mid/near/close
field and half/quarter/eighth space compensation.
Second bank of DIP switches controls mid band and HF shelving trim.
Note that the DIP switch flat setting is shown on the back panel artwork.
Small hole to the right of the right hand switch bank allows the factory set
HF trim on test to be fine trimmed by a service agent if a tweeter needs to
be replaced.
TECHNICAL SPECIFICATIONS
PERFORMANCE
Frequency response (1) 46Hz-51kHZ
Max SPL (2) 118dB
Distortion
Weight
16.00 kg
Reviews
There are no reviews yet.
Be the first to review “TANNOY REVEAL-8D ACTIVE STUDIO MONITOR” Cancel reply
Reveal 8D
A set of DIP switches on the rear control panel of the new Reveal D Active monitors
allow the selection of an optimum speaker response for real life and often difficult
monitoring situations so that the frequency response at the listener?s ears is always
as linear and flat as possible. Reveal monitors can therefore be optimised for varying
listening distances in difficult acoustic spaces; varying meter bridge positions, against
and adjacent to walls or reflecting surfaces, in corners, in corners on shelves or brackets,
table top / space restricted PC/Mac based sound editing environments and stand mounted
or soffit mounted configurations.
MAIN FEATURES
From the front:
40mm MDF sculpted baffle ? stiff, heavy and rigid and minimises diffraction.
Recessed drive units flush with the baffle surface ? minimises diffraction.
New tweeter has wide band design extending the amplitude response beyond
20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz
within the audible band. This preserves the harmonic structure of sounds and
the stability of the stereo image.
Smooth tweeter faceplate contours prevent diffraction and cavity effects.
10 point fixing maximises contact between drive unit and baffle.
New design bass units have aluminium flux control rings around the voice coils
and copper caps on the pole pieces ? linearises the voice coil motional impedance
to reduce non linear (3rd order) distortion products caused by varying voice coil
inductance.
Bass unit development using Klippell? analysis equipment to minimise offsets
and linearise the suspension components.
On/Mute (energy saving mode) via the Tannoy logo push switch.
LED indicator shows Active/Energy Saving modes.
From the side:
18mm MDF cabinet construction provides stiffness and minimises colouration.
Internal construction braces the sides and rear of the cabinet against the rear
of the bass driver to provide a rigid reactive mass for the moving cone assembly.
Ensures fast tight bass response and clear midrange.
Front baffle and rear panel tongued and grooved into the cabinet as a mechanical
interlock for safety if wall mounted.
From the rear:
Double insulated to prevent ground loops ? no safety earth required.
CSA/CE/CCC/CB full safety approvals including China.
Spare fuse in IEC mains connector.
On/Off mains isolator switch.
Substantial heat sinking for long term cool running and 24/7 reliability.
XLR and 1/4? jack Combi connector for balanced input.
Switch adjacent to XLR selects digital or analogue input.
RCA input for SPDIF with 75 Ohm terminating impedance.
2nd RCA for SPDIF output for slaving a stereo pair.
Yellow LED indicator lights up when digital lock is achieved.
3-way switch selects which channel of the SPDIF stream is decoded,
marked Left/Right/Mono. Switching is post 2 channel DAC.
Trim/Gain control over +6dB/-12dB range reference 0dBV (0.775V)
input for full rated output.
Trim/Gain control works on SPDIF input post DAC.
Switch selection of 12dB/8ve 80Hz hi-pass filter for use with AV subwoofers.
First bank of 10 DIP switches controls LF alignment, mid/near/close
field and half/quarter/eighth space compensation.
Second bank of DIP switches controls mid band and HF shelving trim.
Note that the DIP switch flat setting is shown on the back panel artwork.
Small hole to the right of the right hand switch bank allows the factory set
HF trim on test to be fine trimmed by a service agent if a tweeter needs to
be replaced.
TECHNICAL SPECIFICATIONS
PERFORMANCE
Frequency response (1) 46Hz-51kHZ
Max SPL (2) 118dB
Distortion
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors
OVERVIEW
The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.
The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.
Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.
Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.
FEATURES
2-Way active studio monitor pair
Ideally suited for computer studios, multimedia workstations and keyboards
Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
Powerful woofers and high-resolution tweeters
High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
Individual volume controls for both Line inputs plus Bass and Treble EQ controls
1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel
SPECIFICATIONS
MS20 Digital Monitor Speakers (Pair)
Loudspeakers
Tweeter: ˜ 65 mm (2 1/2“), 8 ?
Woofer: ˜ 92 mm (3 5/8“), 4 ?
Audio Inputs
Line 1: 1/8" TRS stereo, impedance 20 k?
Line 2: 2 RCA, impedance 20 k?
Digital Inputs
Optical: TOSLINK
Coaxial: RCA
Converter: 24-bit
Sample rate:
System Specs
Output power: 2 x 20W
Frequency response: 50Hz to 25kHz
Power Supply
Mains Voltages: USA/Canada 120 V, 60 Hz
Power Consumption: 80W
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.