Content |
Reveal 8D
A set of DIP switches on the rear control panel of the new Reveal D Active monitors
allow the selection of an optimum speaker response for real life and often difficult
monitoring situations so that the frequency response at the listener?s ears is always
as linear and flat as possible. Reveal monitors can therefore be optimised for varying
listening distances in difficult acoustic spaces; varying meter bridge positions, against
and adjacent to walls or reflecting surfaces, in corners, in corners on shelves or brackets,
table top / space restricted PC/Mac based sound editing environments and stand mounted
or soffit mounted configurations.
MAIN FEATURES
From the front:
40mm MDF sculpted baffle ? stiff, heavy and rigid and minimises diffraction.
Recessed drive units flush with the baffle surface ? minimises diffraction.
New tweeter has wide band design extending the amplitude response beyond
20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz
within the audible band. This preserves the harmonic structure of sounds and
the stability of the stereo image.
Smooth tweeter faceplate contours prevent diffraction and cavity effects.
10 point fixing maximises contact between drive unit and baffle.
New design bass units have aluminium flux control rings around the voice coils
and copper caps on the pole pieces ? linearises the voice coil motional impedance
to reduce non linear (3rd order) distortion products caused by varying voice coil
inductance.
Bass unit development using Klippell? analysis equipment to minimise offsets
and linearise the suspension components.
On/Mute (energy saving mode) via the Tannoy logo push switch.
LED indicator shows Active/Energy Saving modes.
From the side:
18mm MDF cabinet construction provides stiffness and minimises colouration.
Internal construction braces the sides and rear of the cabinet against the rear
of the bass driver to provide a rigid reactive mass for the moving cone assembly.
Ensures fast tight bass response and clear midrange.
Front baffle and rear panel tongued and grooved into the cabinet as a mechanical
interlock for safety if wall mounted.
From the rear:
Double insulated to prevent ground loops ? no safety earth required.
CSA/CE/CCC/CB full safety approvals including China.
Spare fuse in IEC mains connector.
On/Off mains isolator switch.
Substantial heat sinking for long term cool running and 24/7 reliability.
XLR and 1/4? jack Combi connector for balanced input.
Switch adjacent to XLR selects digital or analogue input.
RCA input for SPDIF with 75 Ohm terminating impedance.
2nd RCA for SPDIF output for slaving a stereo pair.
Yellow LED indicator lights up when digital lock is achieved.
3-way switch selects which channel of the SPDIF stream is decoded,
marked Left/Right/Mono. Switching is post 2 channel DAC.
Trim/Gain control over +6dB/-12dB range reference 0dBV (0.775V)
input for full rated output.
Trim/Gain control works on SPDIF input post DAC.
Switch selection of 12dB/8ve 80Hz hi-pass filter for use with AV subwoofers.
First bank of 10 DIP switches controls LF alignment, mid/near/close
field and half/quarter/eighth space compensation.
Second bank of DIP switches controls mid band and HF shelving trim.
Note that the DIP switch flat setting is shown on the back panel artwork.
Small hole to the right of the right hand switch bank allows the factory set
HF trim on test to be fine trimmed by a service agent if a tweeter needs to
be replaced.
TECHNICAL SPECIFICATIONS
PERFORMANCE
Frequency response (1) 46Hz-51kHZ
Max SPL (2) 118dB
Distortion |
PRICE PER UNIT
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
Woofer |
| Number | 1 | Basket Ø | 9" (228 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Midrange |
| Number | 1 | Basket Ø | 4.5" (116 mm) | Voice coil Ø | 1" (25 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Midrange | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 32 Hz - 50 kHz | THD > 80 Hz | ≤0.6 % | Long term output | ≥114 dB | Max. peak | ≥124 dB | Crossover frequencies | 350 / 2800 Hz | Input impedance | 10 KOhm | Weight | 34 lb (15,4 kg) | Magnetically shielded | Optional | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
PRICE PER UNIT
S2X
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: "Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
Woofer |
| Number | 1 | Basket Ø | 7.5" (186 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 35 Hz - 50 kHz | THD > 80 Hz | ≤0.8 % | Long term output | ≥110 dB | Max. peak | ≥120 dB | Crossover frequencies | 2200 Hz | Input impedance | 10 KOhm | Weight | 23.8 lb (10,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
Specifications Frequency response : | 40Hz - 40kHz | Maximum SPL : | 113dB SPL (peak @ 1m) |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| Bass/mid-range : | 150W rms, BASH® technology | Treble : | 100W rms, AB class |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
|
Visualization and control :
|
Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector
| warning light : | Power on LED |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
| Woofer : | 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker | Tweeter : | Focal TB871 Beryllium inverted dome tweeter | transducer shielding : | Integral through cancellation magnets or by magnet design | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body
| Dimensions (HxWxD) : | 13 x 9-7/16 x 11-7/16 " (330x240x290mm) | Weight : | 24.2lb (11kg) |
|
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
|
PRICE PER UNIT ADAMs A7 & A7X: the evolution of a legend The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level. Driver technology The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels. The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Mid-Woofer | | Number | 1 | Basket Ø | 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 42 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥106 dB | Max. peak | ≥114 dB | Crossover frequencies | 2500 Hz | Input impedance | 30 KOhm | Weight | 20.3 lb (9,2 kg) | Magnetically shielded | No | Height x Width x Depth | 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) | Warranty | 5 Years | Delivery contents | Power cord, Manual |
|
Reviews
There are no reviews yet.