| Content | Specifications:
- Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
- Recording format
• WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit
• BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit
- Number of channels: 4-channel (stereo × 2, mono × 4)
- Analog audio input
• Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack
Set to "MIC / MIC+PHANTOM“
• Input impedance: 2k ohms
• Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
• Maximum input level: 0dBu
• Minimum input level: -72dBu
• MIC input gain: TRIM MAX
• LOW: +11dB
• HIGH: +51dB
• HI + PLUS: +63dB
• Input impedance: 10k ohms or more
• Standard input level: +4dBu
• Maximum input level: +20dBu
• Connector: 3.5mm(1/8“)stereo mini jack (this connector can be supplied plug-in power)
• Input impedance: 10k ohms
• Maximum input level: +10dBV
• Minimum input level: -50dBV
• MIC input gain: TRIM MAX
• LOW: +3dB
• HIGH: +26dB
• HI + PLUS: +38dB
• Connector: 3.5mm(1/8“)stereo mini jack
• Input impedance: 10k ohms
• Standard input level: -10dBV
• Maximum input level: +6dBV
Analog audio output
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -10dBV
• Maximum output level: +6dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -40dBV
• Maximum output level: -24dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Maximum output level: 20mW + 20mW
USB
• Connector: Micro-B type
• Format: USB2.0 HIGH SPEED mass storage class
- REMOTE Connector: 2.5mm TRS jack
- Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
- Power consumption: 5.0W
- Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
- Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
- Weight: 625g ( including batteries) / 530g (without batteries )
|
The KORE 64™ ROM option represents a complete expansion and reimagining of the PC3 and PC3K's sonic potential (not for the PC3LE). Pushing the limits of V.A.S.T. synthesis for both realistic and experimental electronic sounds, KORE 64™ adds over 300 new programs, including stunning new Synths, Electric Guitars, Horns, Drums and Percussion. With KORE 64™ installed, the PC3/K built-in program library now totals over 1400 presets!
New Setups:
50 new setups featuring the KORE 64™ sounds.
Over 200 new drum grooves in multiple styles.
New Dance and Hip Hop setups for triggering and controlling beats in real time.
New Synths:
New samples modeled after the Oberheim SEM, ARP Chroma, TX802, CZ1, and dozens of legacy waveforms from the K series.
Over 100 new synth programs.
Sounds for popular electronic music styles like House, Trance, Dubstep, Drum&Bass, Glitch, Electro Hip Hop, and more.
More real time controls, beat-synced modulations and envelope control transform sounds without hitting the edit button.
Atmospheric and cycling pads voiced for performing, producing, and scoring.
New Guitars:
New samples modeled after the Gibson Les Paul and Fender Stratocaster.
Palm muted and sustained articulations playable in a picked or legato style.
Instant-shredder arpeggiator patterns, whammy bar effects, and realistic feedback emulations.
Preset sounds from Rock, Country, Rock-a-Billy, Metal, Funk, and more.
New Brass/Woodwinds:
New alto sax, tenor sax, baritone sax, trumpet, and trombone samples.
New programs include solo instruments and custom sections with many combinations of the different instruments.
Articulate with pressure on several new programs.
Sections cover styles from Big Band, Soul, Funk, Latin, R&B, Hip Hop, Rock and more.
New Drums
Drums from Yamaha, Ludwig, Pearl, DW, Rogers, and Gretsch recorded as full kits.
Full cymbal arrays recorded with Zildjian, Paiste, and Sabian cymbals.
72 new Drum Kits and 62 percussion instruments and templates.
10 times the samples and 30 times the data of the existing PC3/PC3K Drums.
All drum kits have mixer functioning on the sliders to change the level the kick, snare, toms, hats, and percussion independently.
Unsurpassed realism and playability for sampled drums.
Full complement of Electronic and Processed Drum samples.
Scratches, hits and Industrial Sounds.
Wide variety of traditional and processed Percussion sounds.
Download the full preset Objects List under the Downloads section
User Installable.
Requires: PC3K OS v2.20 or better
PC3 OS v2.20 or better
All specifications subject to change without notice.
|
Korg D-4 Digital Recording Studio
High-performance recording studio in a
friendly, compact package
Welcome a new member to Korg?s lineup of D-series recorders - acclaimed for their superb audio quality and intuitive ease-of-use. About the same size as a VHS video tape, the D4 Digital Recorder contains built-in effects, rhythms, and a tuner, everything needed to plug in a guitar or mic and start recording right away. Five real-time knobs provide immediate control over numerous functions, including a full array of Korg?s proprietary ?REMS? modeling effects. These same knobs perform double duty as Pan knobs and Record Select buttons; an informative backlit LCD screen keeps it all together. Inside, you?ll find powerful recording and sophisticated editing functions that rival high level models. There?s even a USB connector that makes it easy to transfer song data to a computer. With enormous potential packed into its small size, the D4 is the ideal partner for your creative music life.
Main features
? 4-Track digital recorder features 8 virtual tracks per track, for a total of 32 tracks.
? Two tracks of simultaneous recording.
? High audio quality with extended recording times using MPEG1 Layer 2 compressed recording format.
? XLR and 1/4 inch inputs accommodate both a microphone and/or guitar.
? Intuitive user interface provides plenty of knobs for easy operation.
? Instantly recall frequently-used effect settings, including custom-tailored settings, using the Favorites knob.
? Five knobs (with push-button function) allow for easy effect editing and pan control.
? Full suite of non-destructive editing tools includes punch-in/out, bounce, copy/paste, delete ? even pro-level functions such as time compression/expansion are provided.
? Korg?s proprietary ?REMS? modeling technology delivers 93 effect types that can be used for guitar, insert, master, or final effect processing. There are 100 preset effect programs ready for immediate use, and 100 user program locations.
? High-capacity CompactFlash data storage.
? Transfer data to a computer quickly and easily via the USB connector.
? Built-in mic allows immediate recording on the go.
? 87 Rhythm / metronome patterns and a chromatic tuner are built-in.
? The custom LCD display is backlit for easy visibility - even in dark locations.
? AC adaptor and 64 MB CompactFlash media are included.
A studio that?s just the right size
The D4 is a complete four-track recording studio, providing multi-effects based on Korg?s proprietary ?REMS? modeling technology, and an array of rhythm and metronome patterns to compliment any musical style. Just plug a guitar or microphone into the D-4 and you can begin creating your own song a track at a time. Eight virtual tracks are provided for each track, so you can choose the best take as you build your song. The D4 records directly to CompactFlash using one of three modes ?High Quality, Standard or Economy ? providing extended recording time with great audio quality. CompactFlash cards of up to 2 GB* may be used and each one can store up to 99 songs, recorded and saved in MP2 (MPEG-1 Layer-2) format. A built-in mic lets you make quick musical memos as inspiration comes to you. There?s also a built-in tuner, ensuring that you?ll be in tune whenever you record.
*maximum recording time = 72 hours, single track using Economy mode with a 2 GB CompactFlash.
Simple, easy-to-use controls, including
new ?turn and push? knobs
Despite its compact size, the D4 offers quick and convenient control of its many professional features and rich functionality. A single knob takes you from mode to mode. Five dedicated knobs provide real-time editing of the onboard REMS effects. By pushing down on these same knobs you can select recording status of each track and turn effects on and off. There?s also a ?favorites knob? that lets you instantly recall eleven of your favorite effects. The Value Dial provides a quick way to change settings and select various options. With trim knobs on both inputs (XLR and 1/4" are provided for Input 2, 1/4" only on Input 1), you?ll be able to get the optimum level in any recording situation.
A full suite of editing tools
bring a final polish to your song
The D4 provides the functionality and flexibility you?ve come to expect from Korg digital recorders, including copy, delete, punch-in recording and more. Bounce recording combines multiple tracks into one ? with no loss of fidelity ? and frees up tracks for additional recording. You can also use professional time compression/expansion editing functions to alter previously-recorded phrases so they match the tempo of your song.
“REMS" modeling effect technology
KORG?s proprietary "REMS" (Resonant structure and Electronic circuit Modeling System) modeling technology simulates the audio characteristics of many classic guitar amps, legendary recording microphones and numerous effects with startling realism, adding depth and character to your original recordings. The AMP effect faithfully recreates a range of amps; from classics such as the VOX AC30TB through today?s latest guitar amps. The CABINET effect accurately simulates a wide variety of speaker cabinets that match the various AMP types. The 4-BAND EQ allows you to make detailed adjustments to the tonal character and you can also apply chorus, phaser, and flanger type MODULATION effects. For recording bass parts, the BASS DRIVE and BASS CABINET effects provide a broad spectrum of bass sounds that perfectly simulate the character of various bass rigs. When it comes time to add vocals ? or another acoustic instrument ? the mic simulator recreates the ideal tonality for various recording applications.
What is REMS?
REMS (Resonant structure and Electronic circuit Modeling System) is Korg?s proprietary modeling technology that digitally simulates a wide range of factors that affect sound, including the sound-producing mechanism of acoustic and electric/electronic instruments, the body and cabinet resonances that affect the tone, the spatial character of the sound field in which the sound is heard, the electrical and acoustical response of the mics and speakers that are in the sound-transmission path, and the way in which electrical circuits such as vacuum tubes and transistors affect the tone.
Create multi-effect ?chains? using up to five simultaneous effects
The D4 digital recorder provides four types of effect chains, in which up to five effects can be connected in a specified order. This makes it easy to create multi-effects that are suitable for the material you?re recording. These effect chains are stored as programs, with 100 user and 100 preset locations for easy access. The presets contain programs created by professional musicians and studio engineers and are ready to use. You can edit the effects in a program and store it in the user program area. Four chain types are provided. [GUITAR/MIC] is used when applying effects to a mono input, such as guitar or vocal; [INSERT/GTR+VO] is for use with a stereo input, or when applying separate effects to a vocal track and a guitar track that are being recorded simultaneously; [MASTER] makes the overall sound more consistent; and [FINAL], which applies overall adjustments to the final output stage. A dedicated switch is provided to select each chain type. No complicated operations are required, letting you concentrate on your recording.
High-quality PCM rhythms
Inside the D4 is a PCM sound generator that can produce 87 different rhythm patterns (32 metronome patterns and 55 rhythm patterns). The rich array of patterns include 8 beat, 16 beat, Rock, Funk, Big Beat, House, Reggae, Hip-Hop, R&B, Disco, Dance, Jazz, 3/4, 6/8, 5/4, and 7/4, covering a broad range from simple beats to highly distinctive styles. These rhythm patterns may be used as recording guides, or as an easy way to create tracks.
Reliable, convenient CompactFlash storage
CompactFlash capacities of 16 MB ? 2 GB are supported for data storage.*1*2 The data is written automatically when you?ve finished recording or editing. The D4 also provides a USB connector, so it?s easy to transfer song data and user effect data to your computer for backup.*3 Completed songs created within the D4 as stereo MPEG format*4 song files, can be played back as stereo MPEG files on your computer.*5 This also makes it easy to distribute or exchange data on the Internet.
*1 One (1) 64 MB CompactFlash card containing demo song data is included.
*2 CF TYPE I cards only. CF TYPE II cards are not supported.
*3 USB connection requires Windows 2000/Me or later, or Mac OS 9.0.4 or later. If your computer does not have a USB connector, you can still use a card reader/writer to backup data that?s stored on the card.
*4 MPEG1 Layer2 format.
*5 Windows Me, Windows 2000, Mac OS 9.0.4, or later systems are supported - when using a PC with an audio card that supports 32 kHz.
| Recorder Section: |
| |
Number of Tracks: |
| |
4 tracks x 8 virtual tracks; 4 tracks simultaneous playback /2 tracks simultaneous recording
|
| |
Recording Format: |
| |
16 bit MPEG 1 Layer 2 compression, 32 kHz
|
| |
Recording Time: |
| |
Hi Quality = approx. 44 minutes /1 track
Standard = approx. 64 minutes /1 tracks
Economy = approx. 132 minutes /1 track
(when using 64 MB CompactFlash), maximum of approx. 4200 minutes /1 track (Economy, when using 2 GB CompactFlash)
* Recording time may vary slightly depending on conditions of use.
|
| |
Number of Songs: |
| |
99 songs per card
|
| |
Tempo: |
| |
40 ~ 240
|
| |
Metronome Patterns: |
| |
32
|
| |
Rhythm Patterns: |
| |
55
|
| |
Track Editing: |
| |
Copy, Insert, Erase, Delete, Time Expansion/Compression
|
| |
Song Editing: |
| |
Rename, Copy, Delete
|
| |
Counter: |
| |
Min/Sec/Msec, Meas/Beat/Tick
|
Mixer Section: |
| |
Structure: |
| |
4 ch + 2 ch (when using sub-input function)
|
Effect Section: |
| |
Structure: |
| |
Guitar/Mic, Insert/Guitar+Vocal, Master, Final;
One of the above effects can be selected for use.
|
| |
Effects: |
| |
100 presets / 100 users
|
Tuner: |
| |
Detection Range: |
| |
27.5 Hz ~ 2093 Hz
|
| |
Calibration: |
| |
fixed at A=440 Hz
|
Card: |
| |
Usable Type: |
| |
16 MB ~ 2 GB CompactFlash
|
General: |
| |
Power Supply: |
| |
Included AC adapter
|
| |
Dimensions: |
| |
7.52? (W) x 5.71? (D) x 1.61? (H)
191 (W) x 145 (D) x 41 (H) mm
|
| |
Weight: |
| |
0.91 lbs./415 g
|
Analog/Digital Input/Output Specifications: |
| |
A/D, D/A Conversion: |
| |
20 bit
|
| |
Sampling Frequency: |
| |
32 kHz
|
INPUT 1, 2: |
| |
Connector: |
| |
ψ6.3 mm phone jacks (unbalanced), XLR-3-31 type (balanced); when selecting INPUT 2 MIC
|
LINE: |
| |
Input Impedance: |
| |
22 kOhm
|
| |
Rated Level: |
| |
-32 dBu (INPUT LEVEL = Max),
+4 dBu (INPUT LEVEL = min)
|
| |
Maximum Level: |
| |
-18 dBu (INPUT LEVEL = Max),
+16 dBu (INPUT LEVEL = min)
|
| |
Source Impedance: |
| |
600 Ohm
|
MIC: |
| |
Input Impedance: |
| |
10 kOhm: ψ6.3 mm phone jack (unbalanced),
10 kOhm: XLR-3-31 type (balanced)
|
| |
When using phone jack (unbalanced): |
| |
Rated Level: -52 dBu (INPUT LEVEL = max)
-16 dBu (INPUT LEVEL = min)
Maximum Level: -40 dBu (INPUT LEVEL = max)
-4 dBu (INPUT LEVEL = min)
|
| |
When using INPUT 2 XLR (balanced): |
| |
Rated Level: -60 dBu (INPUT LEVEL = max)
-28 dBu (INPUT LEVEL = min)
Maximum Level: -48 dBu (INPUT LEVEL = max)
-16 dBu (INPUT LEVEL = min)
Source Impedance: 600 Ohm
|
GTR: |
| |
Input Impedance: |
| |
890 kOhm
|
| |
Rated Level: |
| |
-30 dBu (INPUT LEVEL = max)
+4 dBu (INPUT LEVEL = min)
|
| |
Maximum Level: |
| |
-18 dBu (INPUT LEVEL = max)
+16 dBu (INPUT LEVEL = min)
|
| |
Source Impedance: |
| |
600 Ohm
|
OUTPUT: |
| |
Connector: |
| |
RCA phono jacks
|
| |
Output Impedance: |
| |
1 kOhm
|
| |
Maximum Level: |
| |
+2 dBu
|
| |
Rated Level: |
| |
-10 dBu
|
| |
Load Impedance: |
| |
Greater than 10 kOhm
|
Phones Output: |
| |
Connector: |
| |
Mini-stereo phone jack
|
| |
Output Impedance: |
| |
10 Ohm
|
| |
Maximum Level: |
| |
15 mW @ 33 Ohm
|
Foot Switch: |
| |
Connector: |
| |
ψ6.3 mm phone jack (use separately sold
PS-1 foot switch)
|
USB: |
| |
Connector: |
| |
Type B
|
| |
Supported OS: |
| |
Windows Me/2000 or later, Mac OS 9.0.4 or later
|
Included Items: |
| |
CompactFlash, AC adapter
|
D4 Options: |
| |
PS-1 Foot Switch |
|
The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.
The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal
•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal
•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently
Features - Support for PAL, NTSC and 60 Hz B&W standards
- One composite video input and three composite video outputs
- Can operate as a master black-burst generator
- Can operate as genlocking slave device
| Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording.
For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example.
Main Features
32-track digital Portastudio
8 mono tracks, 12 stereo tracks (can also be used as mono tracks)
Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution
Simultaneous playback of all 32 tracks
Virtual tracks for alternate takes and undo
Dedicated stereo master track
Colour LC display and 12-encoder channel strip for simple operation
Built-in 40-channel mixer
Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track
Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track
Dedicated controls for EQ, pan and effect sends
Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording
8 balanced microphone inputs on balanced combo XLR/jack connectors
Switchable phantom power for 4 channels each
One input switchable to instrument level for direct recording of a guitar or bass
Unbalanced stereo output (RCA jacks)
Balanced stereo monitor output (6.3-mm TRS jacks)
Two unbalanced effect sends (6.3-mm TS jacks)
Stereo headphones output (6.3-mm TRS jack)
MIDI input and output for MMC, Control Change and MTC output
Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory)
Input effects (Limiter, Compressor, Noise suppressor, Exciter)
Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter)
Mixdown effects (Reverb, Delay, Stereo chorus)
Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping)
Mark function (up to 99 location marks)
Built-in chromatic tuner and metronome
CD-RW drive for audio CD creation as well as file import and export
USB 2.0 port for data backup/restore and file transfer with a computer
Specifications
Recording media and file systems
Recording media SD card (512 MB to 2 GB)
SDHC card (4–32 GB)
File system SD card (512 MB to 2 GB): FAT16
SDHC card (4–32 GB): FAT32
Analogue audio inputs and outputs
MIC/LINE INPUTS A–H, XLR (balanced)
Connector XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance 2.4 kOhm
Nominal input level –14 dBu
Maximum input level +2 dBu
MIC/LINE INPUTS A–H, phone jack (balanced)
Connector 6.3-mm TRS phone jack
Input impedance >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR)
Nominal input level +4 dBu
Maximum input level +20 dBu
STEREO OUT L/R connectors RCA pin jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
EFFECT SENDS 1/2 connectors 6.3-mm TS phone jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
MONITOR OUT L/R connectors 6.3-mm TRS phone jack
Nominal output level –2 dBu
Maximum output level +14 dBu
Output impedance 200 Ohm
PHONES connector 6.3-mm TRS phone jack
Maximum output power 70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load)
Other inputs and outputs
MIDI input (MIDI IN) DIN 5 pin
Format Standard MIDI format
MIDI output (MIDI OUT) DIN 5 pin
Format Standard MIDI format
USB connector USB 4-pin mini-B type
Format Mass Storage Class USB 2.0 High Speed
REMOTE connector 2.5-mm TRS jack
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Operating system requirements
Windows Pentium 300 MHz or faster
128 MB or more memory
Macintosh Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port USB 2.0
Recommended USB host controller Intel chipset
Supported operating systems Windows XP, Windows Vista, Windows 7
Mac OS X 10.2 or later
Power requirements and other specifications
Power supply AC adaptor (TASCAM PS-1225L)
Power consumption 12 W (Phantom power on)
Dimensions (Width x Height x Depth, excluding projections) 514 mm x 104 mm x 340 mm
Weight 6.2 kg
Operating temperature 5–35 °C
Design and specifications subject to change without notice. |
Specifications | General | | Recording media | | CompactFlash (CF) card | | File system | | FAT32 | | Recording format | | BWF (Monophonic, Polyphonic) | | Number of channels | | 8 channels (44.1/48/88.2/96 kHz)
8 channels + stereo mix (44.1/48 kHz)
4 channels (176.4/192 kHz) | | Quantization bit rate | | 16/24 bit | | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | Reference clock | | Internal, Word In, Video In, Digital In (AES 1-8 IN, AES A-BIN, ADAT 1-8 IN) | | Type of timecode frame | | 23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF | | Limiter | | Attack time: 3 ms
Release time: 300 ms
Threshold: –5 dBFS
Ratio: 32:1 | | Analogue audio inputs and outputs | | The error for nominal and maximum levels is ±1dB for all input and output jacks except the PHONES jack. | | ANALOG INPUT (1-8) | | D-sub 25-pin | | Input impedance | | 10 kOhm | | Nominal input level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG INPUT (L/A, R/B) | | XLR-3-31 (1: GND, 2: HOT, 3: COLD) | | Input impedance | | 10 kOhm | | Nominal input level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG OUTPUT (1-8) | | D-sub, 25-pin | | Output impedance | | 100 Ohm | | Nominal output level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG OUTPUT (A/B) | | XLR-3-32 (1: GND, 2: HOT, 3: COLD) | | Output impedance | | 100 Ohm | | Nominal output level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | PHONES connector | | 6.3-mm standard stereo jack | | Maximum output power | | 45 mW + 45 mW or more (THD+N 0.1 % or less, into 32 Ohm) | | Digital audio inputs and outputs | | DIGITAL IN/OUT (AES/EBU) | | D-sub, 25-pin | | Minimum input voltage | | 2 Vpp | | Maximum input voltage | | 7 Vpp | | Output voltage | | 2–5 Vpp | | Format | | AES3-2003/IEC 60958-4 (AES/EBU) | | DIGITAL I/O (ADAT) | | ADAT optical | | Format | | ADAT | | DIGITAL INPUT A-B | | XLR-3-31 | | Input voltage | | 2–7 Vpp at 110 Ohm | | Format | | AES3-2003 (AES/EBU) | | DIGITAL OUTPUT L-R | | XLR-3-32 | | Output voltage | | 2–5 Vpp at 110 Ohm | | Format | | AES3-2003 (AES/EBU) | | Other inputs and outputs | | RS-422 | | D-sub, 9-pin | | RS-232C | | D-sub, 9-pin | | PARALLEL | | D-sub, 25-pin | | CASCADE IN | | BNC | | Input voltage | | TTL equivalent (5 V) | | Input impedance | | 75 Ohm ±10 %
Allowable frequency deviation of external synchronization: ± 100 ppm | | CASCADE OUT | | BNC | | Output voltage | | TTL equivalent (5 V) | | Output impedance | | 75 Ohm ±10 % | | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | TIME CODE IN | | BNC | | Input voltage | | 0.5–5 Vpp | | Input impedance | | 20 kOhm | | TIME CODE OUT | | BNC | | Output voltage | | 2–5 Vpp | | Output impedance | | 600 Ohm ±10 | | WORD/VIDEO IN | | BNC | | Input voltage | | TTL equivalent (5 V) | | Input impedance | | 75 Ohm ±10 %
Allowable frequency deviation of external synchronization: ± 100 ppm | | WORD/VIDEO THRU/OUT | | BNC
OUT/THRU switch included (OUT is for WORD OUT only) | | Output voltage | | TTL equivalent (5 V) | | Output impedance | | 75 Ohm ±10 % | | Sampling frequency (when using WORD) | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | ETHERNET | | RJ45 | | Keyboard | | Mini-DIN (PS/2) | | USB | | USB A-type, 4-pin | | Protocol | | USB2.0 HIGH SPEED (480 Mbit/s) | | Audio performance (analogue input to analogue outp | | Frequency response | | | | 20 Hz - 20 kHz | | ±0,5 dB (all sampling rates) | | at 40 kHz | | +0,5 dB/–2 dB (Fs = 88.2/96 kHz) | | at 80 kHz | | +0,5 dB/–5 dB (Fs = 176.4/192 kHz) | | Distortion | | ≤0.005% (Reference level: –20 dB, input level: +23 dBu, 1 kHz, AES-17LPF) | | S/N ratio | | ≥100 dB(A) (22 kHz LPF) | | Power requirements and other specifications | | Power requirements | | 100–240 V AC, 50–60 Hz | | Power consumption | | 26 W | | Dimensions (W x H x D) | | 483 mm x 88 mm x 288 mm | | Weight | | 4.8 kg | | Operating temperature range | | 5–35 °C |
|
Reviews
There are no reviews yet.