TASCAM TM-10LB Condenser lavalier microphone

Original price was: €76.87.Current price is: €73.00. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: TA/EM/000462 Category:
The ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element. The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing […]

 

Read more

The ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element.

The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing them an attractive acccessory to many Sennheiser based audio rigs

Matching Lapel Clip and Windscreen Included

Ensuring a clean, crisp look as well as excellent audio performance in a variety of locations, both the TM-10LB and the TM-10LW come complete with a color matched lapel clip and windscreen.

Features at-a-glance

  • Secure connection with screw-down connector
  • Sennheiser style connector features 1/8” (3.5mm) male jack with screw-down plug for firm connection with wireless transmitters or TASCAM DR-10 series. (Connection with normal 3.5mm jack is also available)
  • Windscreen and clip included
  • Color variation – black (TM-10LB) or white (TM-10LW)
  • Microphone sensitivity: -42dBV/PA, maximum SPL: 115dB SPL
  • Omnidirectional lavalier microphone
  • Cable length: 160cm
Model Back-electret condenser microphone
Directivity Omnidirectional
Frequency response 50Hz – 18,000Hz
Output impedance 1.8k ohm (at 1kHz)
Load impedance 100Ω
Sensitivity -42dB (0dB=1V/Pa at 1kHz)
Max. SPL 115dB SPL (at 1kHz)
Connector 3.5mm (1/8“) stereo mini plug (with screw lock)
Power Plug-in power
Drive voltage 1.5 – 10v
Dimensions 132.5 × 457.5 × 140 mm / 5.2 x 18 x 5.5 inch
Weight 24g (0.053 lb)
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM TM-10LB Condenser lavalier microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM TM-10LB Condenser lavalier microphone removeAUDIO TECHNICA AT831R LAVALIER MICROPHONE removeAUDIO TECHNICA PRO70 CONDENSER LAVALIER MICROPHONE removeAUDIX LP5 Micro-sized lavalier condenser microphone removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeAKG C 417L professional miniature condenser microphone remove
NameTASCAM TM-10LB Condenser lavalier microphone removeAUDIO TECHNICA AT831R LAVALIER MICROPHONE removeAUDIO TECHNICA PRO70 CONDENSER LAVALIER MICROPHONE removeAUDIX LP5 Micro-sized lavalier condenser microphone removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeAKG C 417L professional miniature condenser microphone remove
Image
SKUTA/EM/000462AT831RPRO70L5PWL93 & WL93TC 417L
Rating
Price Original price was: €76.87.Current price is: €73.00. incl. GR VAT Original price was: €279.00.Current price is: €231.00. incl. GR VAT Original price was: €174.62.Current price is: €145.00. incl. GR VAT Original price was: €229.40.Current price is: €213.34. incl. GR VAT Original price was: €230.00.Current price is: €198.00. incl. GR VAT Original price was: €151.28.Current price is: €123.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element. The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing them an attractive acccessory to many Sennheiser based audio rigs Matching Lapel Clip and Windscreen Included Ensuring a clean, crisp look as well as excellent audio performance in a variety of locations, both the TM-10LB and the TM-10LW come complete with a color matched lapel clip and windscreen. Features at-a-glance
  • Secure connection with screw-down connector
  • Sennheiser style connector features 1/8” (3.5mm) male jack with screw-down plug for firm connection with wireless transmitters or TASCAM DR-10 series. (Connection with normal 3.5mm jack is also available)
  • Windscreen and clip included
  • Color variation - black (TM-10LB) or white (TM-10LW)
  • Microphone sensitivity: -42dBV/PA, maximum SPL: 115dB SPL
  • Omnidirectional lavalier microphone
  • Cable length: 160cm
Model Back-electret condenser microphone
Directivity Omnidirectional
Frequency response 50Hz - 18,000Hz
Output impedance 1.8k ohm (at 1kHz)
Load impedance 100Ω
Sensitivity -42dB (0dB=1V/Pa at 1kHz)
Max. SPL 115dB SPL (at 1kHz)
Connector 3.5mm (1/8“) stereo mini plug (with screw lock)
Power Plug-in power
Drive voltage 1.5 - 10v
Dimensions 132.5 × 457.5 × 140 mm / 5.2 x 18 x 5.5 inch
Weight 24g (0.053 lb)

This clip-on lavalier mic provides crisp, full-sounding voice pickup. The AT831R also excels as an instrument mic, especially for pickup of acoustic guitar with included AT8444 guitar adapter. The mic is ideal for higher SPL applications. Excellent gain before feedback and suppression of background noise. Operates on phantom power only.

Clip-on lavalier mic also excels in acoustic guitar applications
Provides crisp, full-sounding voice and instrument pickup
Excellent gain before feedback and suppression of background noise
Operates on phantom power only
4.0 m (13.1') cable permanently attached to mic, TA3F connector at power module
RoHS compliant - free from all substances specified in the EU directive on hazardous substances
Also available as: AT831b - with battery/phantom power module AT831c - less power module; includes clothing clip and windscreen only; 10' (3 m) cable, unterminated AT831cW - less power module; includes clothing clip and windscreen only; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak® wireless systems AT831cT5 - less power module; includes clothing clip and windscreen only; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 body-pack wireless system

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 40-16,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 112 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Switch: Flat, roll-off
Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13“) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories: AT8417 clothing clip; AT8444 guitar adapter; AT8538 remote power module; AT8116 windscreen; protective carrying case

This miniature condenser microphone achieves full-sounding pickup and is known for outstanding consistency and dependable performance. Supplied with both a clothing clip and guitar mount, it provides natural and articulate vocal reproduction when used as a clip-on lavalier and excels in pickup of acoustic guitar. The PRO70 is designed to make music and speech clearly and comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Miniature condenser microphone is ideal for both vocal and acoustic guitar applications
Natural and articulate vocal reproduction when used as a clip-on lavalier - clothing clip included
Excels in pickup of acoustic guitar with included instrument adapter
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Switchable low-frequency roll-off
Corrosion-resistant contacts from gold-plated XLRM-type connector
Operates on battery or phantom power
6\' (1.8 m) cable permanently attached between microphone and power module

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 100-14,000 Hz
Low Frequency Roll Off: 80 Hz, 8 dB/octave
Open Circuit Sensitivity: Phantom: -45 dB (5.6 mV) re 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 200 ohms
Maximum Input Sound Level: Phantom: 123 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 96 dB, 1 kHz at Max SPL Battery: 96 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 67 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Off, on-flat, on-roll-off
Output Connector: Integral 3-pin XLRM-type
Cable: Integral 6\' (1.8 m), permanently attached between microphone and power module
Accessories: AT8411 clothing clip; AT8444 instrument adapter; power module; windscreen; battery; soft protective pouch

Micro-sized lavalier condenser microphone for wireless and wired applications.

Cardioid microphone with 8ʼ cable terminating to a mini-XLRf connector with phantom power adapter for hard wired applications.

Includes APS910
phantom power adapter. 9-52 V phantom power. Black.

Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement Small, inconspicuous mounting hardware Full, clear sound comparable to larger microphones Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation Controlled low-frequency rolloff reduces low-frequency clothing and room noise Low distortion, wide dynamic range Uniform omnidirectional polar pattern Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband Wide-range phantom powering (SM93) accepts all commonly used voltages Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Response Curve Image Small SM93 WL93 View Larger Polar Pattern Omnidirectional, uniform with frequency Output Impedance 3000 ohms Output Level (1 Pascal = 94 dB SPL) Open Circuit Voltage: -38 dBV/Pa (13 mV) Output Clipping Level (at 1,000 Hz) 0.25 V at 120 dB Total Harmonic Distortion Less than 1% at 120 dB Maximum SPL 120 dB Dynamic Range (maximum SPL to A-weighted noise level) 102 dB Output Noise (equivalent SPL) 18 dB typical, A-weighted Signal-to-Noise Ratio 76 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)* *Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector Recommended Operating Voltage 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4) Current Drain 40 microA typical Environmental Conditions Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) Cable Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft]) Case Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille Net Weight Microphone: 16 g (0.57 oz)

Affordable professional miniature condenser microphone. Its broadband, flat audio reproduction in an omnidirectional format is ideal for all types of broadcast and theatrical applications. The sound is extremely open and natural, making it ideal for wireless or hardwire multi-mic situations. An attachment clip, tiepin, and windscreen are supplied with each C 417.

Weight0.10 kg0.15 kg0.30 kg0.50 kg0.20 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.15 kg
Weight 0.30 kg
Weight 0.50 kg
Weight 0.20 kg
Weight 0.30 kg