| Content | The Technics - SL-1210MK7R is a limited special edition of the proven SL-1210MK7 DJ turntable. Since mid 2020, Technics acts as official partner of Red Bull BC One, the world\'s largest breakdance competition. To mark the occasion, Technics presents the "Red Bull BC One" SL-1210MK7R turntable as a special model.
Based on the SL-1210MK7, the special edition SL-1210MK7R is characterized by special features such as the head shell in Red Bull red, the golden tonearm, the slipmat in BC One design, the special control vinyl labels and the included "Technics x Red Bull BC One" sticker.
The Technics - SL-1210MK7R has the same ease of use, reliability and durability as the SL-1210MK7. This DJ turntable also features a coreless direct drive motor, reverse play function and an extended pitch range from ±8% to ±16%. The gold-colored tonearm is statically balanced and highly sensitive, providing high-precision sampling of the record signal. In terms of vibration damping, the Technics SL-1210MK7R features a two-layer platter design, a highly stable housing and effective damping feet. Apart from that, the DJ turntable is equipped with a durable and bright LED needle lighting. Other very practical features include detachable power and signal cables for greater flexibility and start/stop torque adjustment.
- Motor: Direct
- Speeds: 33, 45, 78
- Pitch Control: ±8%, ±16%
- Arm Style: S
- Platter: Die-cast Aluminum
- Torque: 1.8kg/cm
- Analog Outputs: 1 x Dual RCA Stereo
- Cartridge Included: No
- Power Source: Detachable power cable
- Height: 6.65"
- Depth: 13.9"
- Width: 17.84"
- Weight: 21.2 lbs.
Technics - SL-1210MK7R
- Head Shell in Red Bull Red
- Gold tonearm
- Slipmat in BC One design
- Special double control vinyl labels
- “Technics x Red Bull BC One" sticker
- Stylus not included
Technical data
Disk Drive Section
- Type: Direct Drive
- Rotational speeds: 33 1/3, 45, 78 rpm
- Pitch range: ±8%, ±16
- Starting torque: 2.2 kg
- Starting time: 0.7 sec. from standstill to 33 1/3 rpm
- Fluctuations in synchronism: 0.025% W.R.M.S.
- Rumble: 78dB (IEC 98A rated)
- Turntable: Die-cast aluminum
- Diameter: 332 mm
- Weight: approx. 1.5 kg
Tonearm Section
- Type: Universal, statically balanced
- Effective length: 230 mm
- Overhang: 15 mm
- Tracking angle:
- Within 2° 32\' (on the outer groove of a long-playing record (30cm/12“)
- Within 0° 32\' (on the inner groove of a long-playing record (30cm/12“)
- Angle of offset: 22
- Tonearm height adjustment: 0 - 6 mm
- Contact force range: 0 - 4g (direct scanning)
- Weight of the headshell: Approx. 7.6 g
- Cartridge weight range:
- [without additional weight] 5.6 - 12.0 g (14.3 - 20.7g (including headshell)
- [with additional weight] 10.0 - 16.4 g (18.7 - 25.1g (including headshell)
- Hole spacing of cartridge mounting: JIS 12.7 mm
- Headshell cable connections: 1.2 mmφ 4-Pin
Connections
PHONO (RCA) x 1, Earthing screw terminal x 1 | Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.
The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
- Belt drive system with low vibration DC motor
- Central gravity mass point made from artificial stone
- Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
- Low resonance MDF platter with felt mat
- 8,6” ultra low mass tonearm with straight arm tube
- Pre-adjusted tracking force & antiskating
- Gold-plated RCA contacts & cartridge pins
- Colour options: red-black, white-black, silver-black
Specifications:
- speed : 33, 45 (manual speed change)
- Speed variance: 33: 0,2% 45: 0,18%
- Wow & flutter: 33: 0,14% 45: 0,13%
- platter: 300mm MDF
- tonearm: 8,6” metal tube
- effective arm length: 218,5 mm
- overhang: 22,0 mm
- effective tonearmmass: 8,0gr
- counterweight for cartridge mass: 3 - 5,5g (included)
- tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
- output: RCA to phono input
- included accessory: RCA cable, 15V DC power supply
- power consumption: 4,0 watts
- dimensions: 430 x 90 x 300mm (WxHxD)
- weight: 2,7 kg net
|
A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.
The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.
Specifications:
-
speed : 33, 45 (manual speed change)
-
principle : belt drive
-
Speed variance : 33: 0,14% 45: 0,25%
-
Wow & flutter : 0,12%
-
platter : 300mm MDF with felt mat (0,8kg)
-
main bearing : stainless steel
-
tonearm : 8,6” aluminium
-
effective : arm length 218,5 mm
-
overhang : 22,0mm
-
effective tonearmmass : 8,0gr
-
counterweight for mass : 3 - 5,5g (included)
-
tracking force range : 0 - 25mn (OM5 18mn recommended)
-
included accessory : power supply, dust cover
-
Power consumption : 4,5 watts
-
dimensions : 420 x 112 x 330mm (WxHxD)
-
weight : 4,0 kg net
|
High-quality materials, a classic design and love for details are the distinctive characteristics of this fully automatic record player. The massive and stable real wood plinth, which is available also with piano lacquer finish, provides the TD 240-2 with a timeless elegance.
This record player has been equipped with the new TP 19-1 tonearm and an extremely silent running precision belt drive beneath the platter, so that the other technical qualities are also most evident. Set-up and connections are effortlessly carried out so that the TD 240 is ready to play within minutes
Specs:
- Operation fully automatic
- Drive System internal flat drive belt
- Motor electronically controlled DC motor
- Speeds 33-1/3, 45, 78 rpm
- Speed Select electronically
- Platter 12” / 0.7 kg (aluminium, non-magnetic)
- Tonearm THORENS® TP 19-1
- Pick-up Cartridge THORENS® TAS 267
- Anti-skating (Bias) by spring (adjustable)
- Automatic Shut-off mechanically
- Cable Capacitance 160 pF
- Power Supply external mains adaptor (115-230 V / 50-60 Hz depending on type)
- Dimensions 430 x 130 x 365 mm (W x H x D)
- Weight 6.4 kg
- Finish solid wooden plinth with black piano laquer, black structured enamel,
- Scope of Delivery mains adapter, dust cover (acrylic), RCA interconnects, operating instructions
|
Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!
Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.
The only plastic here is the stylus guard!
The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.
• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output
• Colour options: red-black, white-black, silver-black
| Fully automatic turntable for sophisticated demands with solid Makassar ebony console in luxurious equipment. Tonearm technology: Gimbal tonearm with mass-free contact force adjustment thanks to a high-precision torsion spring. Removable, torsion-resistant carbon fibre tonearm head with 13mm (1/2 inch) attachment.
Adjustable contact force and anti-skate.
Chassis technology: solid Makassar ebony console, floating subchassis, heavy sandwich platter with additional damping ring for maximum sound enjoyment.
- Drive technology: belt drive with polished flat belt
- DC motor with electric Speed control
- Viscosity damped tonearm lift
- Automatic tone arm attachment
- End shut-off with tone arm recirculation.
- Playback option for 78 rpm archive records.
Functions
Frequency Response
20 Hz - 22kHz
Power
Power Supply
2 V DC, 150 mA
Dimensions
|
Reviews
There are no reviews yet.