Content |
Auto-mixing advantages
NOM (Number of Open Microphones) - automatically adjusts output level based on the total number of open microphones.Ducker function (Auto-Mute function) - automatically works to attenuate outputs of channels with low priority.
Highly effective feedback suppression.
The D-2000 Series provides feedback elimination for up to 4 channels.
In addition, each channel can control 12 problem frequencies. This
makes it convenient for feedback suppression in different areas of the
same hall. 2 versatile suppression modes.Either presettable Auto Mode or realtime Dynamic Mode can be selected to suit the situation and eliminate feedback.
Essential audio processing
Delay, High-, Low-Pass and Notch Filters, Parametric Equalizers, Compressor/Auto Leveller, Gate, Crossovers and Crosspoint Gain.
32 preset memories for user convenience.
Up to 32 different routing and parameter configurations can be stored in memory and called up to handle venues such as multi-purpose halls
and conference rooms that require frequent changes in staging,seating and speaker arrangements.
Intuitive GUI
The dedicated softwareʼs graphic, visually attractive user interface
helps streamline settings and adjustments.
Mixing console option
The D-2008SP can be connected via network to the D-2012C mixing console with 12 motorized faders and 8 rotary encoders. This enables simplified mixing operation that suit non-professional users. Using the D-2012C, allows input and output channel signal levels to be monitored,volume changes made as well as recalling preset memory settings, and contact control.
VCA control
D-2000 Series units used in conjunction with the optional D-911 VCA
Fader Unit provides more of an analog mixer user interface.
RS-232C control
The RS-232C port allows external control when connected to external
devices such as AMX*1 and Crestron*2 control units. This also allows full control over venue lighting and power curtains (blackout) from a central remote location. This feature is particularly suited for AV presentation rooms, conference rooms and hotel banquet rooms.
Specification |
| Power Source | AC mains,50/60Hz | Power Consumption | 76W | Frequency Response | 20Hz-20kHz,±1dB (±4dB Input) | Sampling Frequency | 48kHz | Input and Output | | Input: | Max.32 channels, modular construction (modules optional) | Output: | Max. 32 channels modular construction (modules optional) | Monitor Bus: | 1 stereo input, 1 stereo output | Headphone: | 1 stereo | Signal Processing | Feedback Supression Function, Auto Mixing Function,Auto Mixing Group,Parametric equalizer,High-pass filter,Low-pass filter,Notch filter,All-pass filter,High shelving filter,Low shelving filter,Horn equalizer,Crossover filter,Compressor/Auto-Leveler,Output delay,BUS delay,Matrix,CobraNet Matrix,Crosspoint Gain | Preset Memory | 32 | Auxiliary Function | Key locking function | LAN | | Network I/F: | 10BASE-T/100BASE-TX (Automatic-Negotiation) connected via a switching hub | Network Protocol: | TCP/IP | Connection Cable: | Shielded Category 5 or higher twisted pair LAN cable (CAT5-STP) | Maximum cable distance: | 100m (109.36 yd)(between D-2008SP and switching hub) | Control | RS-232C,D-sub connector (9 pins)Used for external control | Module:Remote control module slot:2 | Operating Temperature | +5ºC TO +40ºC (41ºF TO 104ºF) | Dimensions | 482(W) x 132.6(H) x 343.4(D)mm | Weight | 6.3kg (13.89lb) | Accessory | Power cord (2m (6.5ft))x 1,Rack mounting screw x 4,Module mounting screw (spare)x 4,Blank panel (preinstalled on the module slot)x 8,CD (Set-up software)x 1 | Personal Computer Requirements | | Personal Computer | PC-AT compatible | Personal Computer Requirement | | CPU: | Pentium4 2GHz or more | Memory: | 1.5GB or more (2GB or more recommended) | Display Adapter: | XGA (1024 x 768) or more | Network Adapter: | 10BASE-T or more | OS | Windows Vista,Windows XP (SP2) or later | Other | .NET Framework 3.5 SP1 (included in the supplied CD) installation required |
|
| - SYSTEM POWER CONTROL It controls the power of the rack system over all working together with the PD-659. - AC OUTLET TERMINAL To make the units using AC work, it has an AC outlet terminal for your convenience. AC switched group turn on and off repeatedly every 2 seconds. | | | | | PD- 658 | AC Outlet | Switched 2000W ⅹ3 | Operation Temperature | -10℃~+40℃ | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | Power Consumption | 10W | Weight(SET) | 4.6Kg/10.1 Ib | Dimension(SET) | 482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in | | | |
|
RM-200M - Five/ten zone console for VM-2120/2240 amplfiers
The RM-200M Remote Microphone that allows announcements to be made to any speaker zone and emergency announcements to all zones on a system with the VM-2120/2240 system management amplifiers.
These announcements can be made live or pre-recorded announcements
can be activated. The remote microphone is connected by cable to the
RM-210 Remote Microphone Extension unit.
SPECIFICATIONS:
Power Requirement | 24 V DC (12-30 V DC), (Supplied from VM-2120/VM-2240 Amplifier or local power suppy.) | Distortion | Less than 1% | Frequency Response | 100 - 10,000 Hz | Distortion | Less than 1% | Signal-to-Noise Ratio | More than 60 dB | Audio Output | 0 dB*1, 600 O, balanced | Microphone | Unidirectional electret condenser microphone, gooseneck type. | Speaker Zone Control | Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast | Emergency Broadcast | Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch | Voice Announcement Board Control | Activation of 5 messages*2 | Number of Connectable Units | Up to 4 | Communication System | RS-485 | Volume Control | Microphone volume control | Connection Cable and Connector Category | 5 STP cable, RJ45 connector | Communication Distance | 800 m maximum in total | Finish | ABS resin | Dimensions | 190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded) |
| *1 0 dB = 1 V
*2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier. |
|
- CONSIDERATION OF USERʼS CONVENIENCE NUMERIC buttons and various function buttons are separated for timer program enter and convenience in use so that the user can easily operate. - ADOPTION OF VACUUM FLUORESCENT DISPLAY PANEL Adopting a vacuum fluorescent display of a dot matrix method enables to check operation status of each function at a glimpse. - PROGRAMMING USING A PC You can easily execute reservation setting thorough management program by connecting a PC to the RS-232C port. - VARIOUS MELODY AND SOUND OUTPUT You can generate various melodies and sounds by linking the flash memory mounted on this unit to our model, PV-632 (MULTI-VOICE FILE). - AC POWER OUTPUT CONTROL When PW-642 and other equipment are connected via the AC outlet terminal of PW-642, you can turn ON/OFF the AC outlet button in the front panel and manually control ON/OFF of the AC power connected to other device. - BACK-UP POWER You can continue to maintain the time counter for about a week though the inner back-up even though AC power turns off with current time set. There is no need of readjusting time even though AC power is applied. - MEASURE AGAINST POWER FAILURE A separate memory is used to prevent data extinguishment due to power failure or other unstable power. - AUTOMATIC RETURN In programming data using a key button on the front side of PW-642 without using a PC, no pressing any button is recognized as cancel of program entry to return to normal operation status. - AC POWER OUTPUT TIME ADJUSTMENT You can adjust the AC power output time of PW-642 by 1~20sec to prevent time delay from occurring in the interface with the outside power amp. - KEY LOCK You can protect reservations and userʼs setting. |
|
|
| | PW - 642 | Input Channel (Balanced) | 5CH | Output Channel (Balanced) | 4CH | Output Level | Maximum 1v | AC Power Output 1 | Maximum 500W | AC Power Output 2 | Maximum 30 w | Data Preservation Time | 7 days and more | Melody Time (15 settings total - 247 seconds) | No.1 | 2 seconds | No.2 | 3 Seconds | No.3 | 3 Seconds | No.4 | 5 Seconds | No.5 | 5 Seconds | No.6 | 7 Seconds | No.7 | 7 Seconds | No.8 | 10 Seconds | No.9 | 10 Seconds | No.10 | 15 Seconds | No.11 | 20 Seconds | No.12 | 30 Seconds | No.13 | 30 Seconds | No.14 | 40 Seconds | No15 | 60 Seconds | Operation Temperature | -10°C ~+ 40°C | Power Source | 100- 120 VAC or 220 -240VAC; 50/60 Hz (Supplied AC mains transformer depends on country requirements) | Power Consumption | 10W | Weight(SET) | 5.7Kg/12.6Ib | Dimension(SET) | 482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in | ※ Specifications and design subject to change without notice. | | | |
|
The JBL MTC-300T150 150 Watt Transformer is intended for use with 70V or 100V distributed loudspeaker lines. It is ideally suited for the Control Series 300, especially the 300BB12 Backbox which includes a preinstalled mounting location. |
Music Program Selector 1-6 with Relay
Toa - 100V installation |
Reviews
There are no reviews yet.