TOA F-2352SC Ceiling Speaker 6W

65.93 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA’s new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an […]

 

Read more

  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA’s new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker’s response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal “back can” enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C’s speaker response.
Specifications
Enclosure n/a
Rated Input 6W (high impedance)
Power Handling Capacity Continuous pink noise: 9W(8), 6W (16)
Continuous program 18W (8), 12W(16)
Impedance (100V Line) 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W), 20kΩ (0.5W)
Impedance (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W),10kΩ (0.5W), 20kΩ (0.25W)
Impedance (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W),10kΩ (0.06W), 20kΩ (0.03W)
Low (Adjustable) 16Ω, 8Ω
Sound Pressure Level 89dB (1W, 1m)
Frequency Response 80 – 20,000Hz (-10dB), 50 – 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: Balanced dome- type
Speaker Component Low frequency: 12cm cone-type
Mounting Hole ø200(maximum ceiling thickness: 37mm)
Input Terminal Push-in connector (Bridging terminal-2 branch type)
Usable Cable 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 – ø1.6mm (equivalent to AWG No.20 – 15)
7-core twisted copper wire:0.75 – 1.25mm² (equivalent to AWG No.18 – 17)
Finish Enclosure n/a
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag Artificial fiber, black
Dimensions ø230 x 154 (D)mm
Weight 1.5kg (including panel)
Accessories Panel 1
Ceiling reinforcement ring n/a
Safety wire n/a
Paper pattern 1
Option Anchor hanging bracket n/a
Back can HY- BC1
Tile bar bridge n/a
Trim ring n/a
Weight 1.50 kg

Reviews

There are no reviews yet.

Be the first to review “TOA F-2352SC Ceiling Speaker 6W”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA F-2352SC Ceiling Speaker 6W removeP.AUDIO PAC-810 Ceiling Speaker 20 Watts removeJBL CONTROL 226C/T-PL Ceiling Speaker, Coaxial 150W removeTOA F-2352C Ceiling Speaker 30W/100V 2-WAY removeJBL CONTROL 47C/T-PL Ceiling Speaker 75 Watts removeTOA F-2852C Ceiling Speaker 60W remove
NameTOA F-2352SC Ceiling Speaker 6W removeP.AUDIO PAC-810 Ceiling Speaker 20 Watts removeJBL CONTROL 226C/T-PL Ceiling Speaker, Coaxial 150W removeTOA F-2352C Ceiling Speaker 30W/100V 2-WAY removeJBL CONTROL 47C/T-PL Ceiling Speaker 75 Watts removeTOA F-2852C Ceiling Speaker 60W remove
Image
SKUF-2352SCPAC-810CONTROL 226C/T-PLF-2352CCONTROL 47C/T-PLF-2852C
Rating
Price 65.93 incl. GR VAT 24.80 incl. GR VAT 424.00 incl. GR VAT 202.00 incl. GR VAT 218.00 incl. GR VAT 252.00 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications
Enclosure n/a
Rated Input 6W (high impedance)
Power Handling Capacity Continuous pink noise: 9W(8), 6W (16)
Continuous program 18W (8), 12W(16)
Impedance (100V Line) 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W), 20kΩ (0.5W)
Impedance (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W),10kΩ (0.5W), 20kΩ (0.25W)
Impedance (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W),10kΩ (0.06W), 20kΩ (0.03W)
Low (Adjustable) 16Ω, 8Ω
Sound Pressure Level 89dB (1W, 1m)
Frequency Response 80 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: Balanced dome- type
Speaker Component Low frequency: 12cm cone-type
Mounting Hole ø200(maximum ceiling thickness: 37mm)
Input Terminal Push-in connector (Bridging terminal-2 branch type)
Usable Cable 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17)
Finish Enclosure n/a
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag Artificial fiber, black
Dimensions ø230 x 154 (D)mm
Weight 1.5kg (including panel)
Accessories Panel 1
Ceiling reinforcement ring n/a
Safety wire n/a
Paper pattern 1
Option Anchor hanging bracket n/a
Back can HY- BC1
Tile bar bridge n/a
Trim ring n/a

 


ΑΒS Plastic. White
Mettalic Grid, White.
8” Dual Cone
Max Power: 20W

The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 226C/T incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 226C/T features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for outstanding reliability and performance. The system is complete with a pre-attached back can and is designed for years of maintenance free use.

Easy to install, the Control 226C/T features JBL Professionalʼs proven C-Ring with Tile Rail suspension system. Installation can be accomplished from beneath the ceiling structure for instances when access above the ceiling tile is not possible. Additionally, the removable multi-pin locking connector, with secure screw-down terminals, allows for prewiring the input wires for easy clip-on convenience during installation.

A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 226C/T enabling the system to be used on 70V or 100V distributed speaker lines. The system can be used in either 8 ohm (low impedance) or transformer mode by selecting the desired function via the baffle mounted impedance switch.

The clean, contemporary look of the Control 226C/Tʼs grille is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

Features

  • Consistent 120° broadband pattern control forexceptional coverage
  • Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
  • Extraordinary clarity for speech and vocals withextended frequency response for music
  • 150 Watts Power Handling
  • Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
  • Integrated back can with clean, contemporary grille

Specifications

  • Frequency Response (-10dB): 47Hz to 19kHz
  • Sensitivity: 90 dB; 95 dB computed for competitivecomparison
  • Coverage Angle: 120 degrees conical, broadband
  • Impedance: 8 ohms (in bypass model)
  • Tap Settings: A) Common; B) 7.5W @ 70V, 15W @ 100V;C) 15 W @ 70V, 30 W @ 100V; D) 30 W @ 70V, 60 W @ 100V; E) 60 W @ 70V, n/c @100V
  • Low Frequency: 6.5" woofer Kevlar reinforced cone
  • High Frequency: 1" exit compression driver
  • Dimensions (H x Dia): 13" round baffle x depth fromback of baffle of 9.7“
  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications
Enclosure Bass reflex type
Rated Input 30W (high impedance)
Power Handling Capacity Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω)
Impedance (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W)
Impedance (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W)
Impedance (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W)
Low (Adjustable 16Ω, 8Ω
Sound Pressure Level 91dB (1W, 1m)
Frequency Response 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: Balanced dome- type
Speaker Component Low frequency: 12cm cone-type
Mounting Hole ø200(maximum ceiling thickness: 37mm)
Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14)
Finish Enclosure Steel plate, plating
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag n/a
Dimensions ø230 x 229 (D)mm
Weight 3.7kg (including mounting accessories)
Accessories Panel 1
Ceiling reinforcement ring 1
Safety wire 1
Paper pattern 1
Option Anchor hanging bracket HY- AH1
Back can HY- BC1
Tile bar bridge HY- TB1
Trim ring HY- TR1


The Control 47C/T features extended bass performance with a wide 120° of coverage that allows fewer speakers to cover a large space. Ideal for a wide variety of applications, the Control 47C/T is perfect for settings ranging from restaurant and retail to large casinos and beyond.

Features:
Proprietary Conical RBI® Technology Provides Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Large Backcan for Bass Response to 50 Hz
Elegant design fits any décor
Specifications:

Component: 6.5" woofer, 1" tweeter
Frequency Range: 50 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1 W 1M
Coverage: 120 degrees conical, consistent broadband
Nominal Impedance: 8 ohms
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield, cutout template, grille
Dimensions (Diameter x Depth): 12" x 10.2“
Suspension Tabs: 3 on top panel

  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.

Specifications
Enclosure Bass reflex type
Rated Input 60W (high impedance)
Power Handling Capacity Continuous pink noise: 90W(8Ω), 60W (16Ω)
Continuous program: 180W(8Ω), 120W(16Ω)
Impedance (100V Line) 170Ω (60W), 330Ω (30W) 670Ω (15W), 3.3kΩ (3W)
Impedance (70V Line) 83Ω (60W),170Ω (30W) 330Ω (15W), 670Ω (7.5W) 3.3kΩ (1.5W)
Impedance (25V Line) 83Ω (7.5W),170Ω (3.7W) 330Ω (1.9W), 670Ω (0.9W) 3.3kΩ (0.2W)
Low (Adjustable 16Ω, 8Ω
Sound Pressure Level 91dB(1W, 1m)
Frequency Response 60 - 20,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: Dome- type
Speaker Component Low frequency: 16cm cone-type
Mounting Hole ø250(maximum ceiling thickness: 37mm)
Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14)
Finish Enclosure Steel plate, plating
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag n/a
Dimensions ø280 x 227 (D)mm
Weight 5.1kg (including mounting accessories)
Accessories Panel 1
Ceiling reinforcement ring 1
Safety wire 1
Paper pattern 1
Option Anchor hanging bracket HY- AH1
Back can n/a
Tile bar bridge HY- TB1
Trim ring n/a
Electronic controller n/a

Weight1.50 kg0.10 kg7.00 kg3.70 kg0.50 kg5.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.50 kg
Weight 0.10 kg
Weight 7.00 kg
Weight 3.70 kg
Weight 0.50 kg
Weight 5.10 kg