TOA GS-302 GARDEN SPEAKER

168.28 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: GS-302 Category:
Stylish, attractively designed out door speaker Blends well into the suroundings of various locations Highly reliable performance Fully satisfies the IPX4 requirements Ideal for paging and Back Ground Music SPECIFICATION ENCLOSURE :BASS-REFLEX TYPE RATED INPUT :30W RATED IMPEDANCE :330ohms(30W), 670ohms(15W), 1kohms(10W), 2kohms(5W),3.3kohms(3W) IMPEDANCE SETTING :SCREW TERMINAL SOUND PRESSURE LEVEL :87dB(1m/1W) FREQUENCY RESPONSE :100-8000Hz SPEAKER UNIT […]

 

Read more

  • Stylish, attractively designed out door speaker
  • Blends well into the suroundings of various locations
  • Highly reliable performance
  • Fully satisfies the IPX4 requirements
  • Ideal for paging and Back Ground Music
SPECIFICATION
ENCLOSURE :BASS-REFLEX TYPE
RATED INPUT :30W
RATED IMPEDANCE :330ohms(30W), 670ohms(15W), 1kohms(10W), 2kohms(5W),3.3kohms(3W)
IMPEDANCE SETTING :SCREW TERMINAL
SOUND PRESSURE LEVEL :87dB(1m/1W)
FREQUENCY RESPONSE :100-8000Hz
SPEAKER UNIT :12cm CONE-TYPE
WATER RESISTANCE :IP-X4
INPUT CONNECTOR :PUSH-IN CONNECTOR or SCREW TERMINAL
APPLICABLE CABLE :SOLID COPPER WIRE 0.9-1.6mm TWISTED COPPER WIRE 0.75-2.5mm
FINISH :SPEAKER COVER, BASE/ FRP RESIN SPEAKER PANEL/ ABS RESIN
DIMENSIONS :270 x 335 mm
WEIGHT 2.4kg
Weight 2.40 kg

Reviews

There are no reviews yet.

Be the first to review “TOA GS-302 GARDEN SPEAKER”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA GS-302 GARDEN SPEAKER removeCROWN CDI-4000 Power amplifier 2X1200W/4ohm, 2Χ1000W/70V removeBITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER removeBIAMP ROCK-20 Speaker Rock removeCrown CDI-1000 2x700W-4Ω Power Amplifier removeAUDIEN BT-221TB 2.5" Speaker 8OHM 20W PEAK 100V PAIR remove
NameTOA GS-302 GARDEN SPEAKER removeCROWN CDI-4000 Power amplifier 2X1200W/4ohm, 2Χ1000W/70V removeBITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER removeBIAMP ROCK-20 Speaker Rock removeCrown CDI-1000 2x700W-4Ω Power Amplifier removeAUDIEN BT-221TB 2.5" Speaker 8OHM 20W PEAK 100V PAIR remove
Image
SKUGS-302CDI-4000XV200H00AP00053CDI-1000BT-221TW
Rating
Price 168.28 incl. GR VAT 2,215.00 incl. GR VAT 727.87 incl. GR VAT278.00 incl. GR VAT 1,235.00 incl. GR VAT44.70 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Stylish, attractively designed out door speaker
  • Blends well into the suroundings of various locations
  • Highly reliable performance
  • Fully satisfies the IPX4 requirements
  • Ideal for paging and Back Ground Music
SPECIFICATION
ENCLOSURE :BASS-REFLEX TYPE
RATED INPUT :30W
RATED IMPEDANCE :330ohms(30W), 670ohms(15W), 1kohms(10W), 2kohms(5W),3.3kohms(3W)
IMPEDANCE SETTING :SCREW TERMINAL
SOUND PRESSURE LEVEL :87dB(1m/1W)
FREQUENCY RESPONSE :100-8000Hz
SPEAKER UNIT :12cm CONE-TYPE
WATER RESISTANCE :IP-X4
INPUT CONNECTOR :PUSH-IN CONNECTOR or SCREW TERMINAL
APPLICABLE CABLE :SOLID COPPER WIRE 0.9-1.6mm TWISTED COPPER WIRE 0.75-2.5mm
FINISH :SPEAKER COVER, BASE/ FRP RESIN SPEAKER PANEL/ ABS RESIN
DIMENSIONS :270 x 335 mm
WEIGHT 2.4kg

Specifications

Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) 100 dB
Damping Factor (8 ohm): 20 Hz to 400 Hz > 500
Input Stage Input is electronically balanced and employs
precision 1% resistors
AC Line Current CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A
At idle: Draws no more than 45 watts.
Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB
Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Dual
Bridge mono
2–8 ohms
4–16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output) CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB
Sensitivity (at 8 ohm rated output) 1.4V
Maximum Input Signal +22 dBu typical
Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V-240V, 50/60 Hz
Ventilation Flow-through ventilation from front to back
Cooling Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D
Net Weight, Shipping Weight 19 lb (8.6kg), 22 lb (10.0 kg)

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 200:  2x 100 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  15 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

 

  • Speaker Rock 2way 6.5''
  • 60Hz-20KHz
  • ισχύς dynamic 32W@8Ω
  • 2.5,5,10,20W@100V
  • sens 98dB @1W/1m, max SPL 113dB
  • wall mount
  • IP64
  • 260x200x280mm
  • 3.6 Kg.

Crown CDi 1000 2x700W-4Ω Power Amplifier

The Crown? CDi 1000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply.
The outputs shall be usable as dual or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items and front panel lockout.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, illuminates when a very low-level
signal is present at input.
?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature
conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker. Dual connectors shall work with 2-8 ohm or
70V loads. Bridge-mono connectors shall work with 4-8 ohm or 140V loads.
HiQnet USB Connector: Type B, connects to a USB port on a PC.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Dual (per channel): 700W with 1% THD, 4 ohm Dual (per
channel): 500W, 8 ohm Dual (per channel) 275W, 4 ohm Bridge-Mono: 1,400W
with 1% THD, 8 ohm Bridge-Mono: 1,000W, 70V Dual (per channel): 500W.
Voltage Gain at 1kHz, 8 ohm rated output: 30.5 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity: 1.4V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 400 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.5A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be
bypassed.
Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24
dB per octave and Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB
bandpass gain and polarity control.
Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 20 presets. 19 are user-definable.
Protection shall include the following:
CDi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg).
The amplifier shall be designated the Crown CDi 1000.

Max Power :   20W Frequency Resp. :   200-20000Hz Sensitivity :    88dB Impedance :  100V / 8OHM SPEAKER :    2,5“ Dimensions (WHD) :     96x139x139mm
Weight2.40 kg10.00 kg15.00 kg3.60 kg10.00 kg1.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.40 kg
Weight 10.00 kg
Weight 15.00 kg
Weight 3.60 kg
Weight 10.00 kg
Weight 1.20 kg