Content |
TOA HX-5 Array system
Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1
|
The SR-S4S is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | Dimensions | 160 (W) × 892 (H) × 303 (D) mm | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4,
Stand adapter: SR-SA4, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
The SR-C8L is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | Directivity Angle | Horizontal: 110゜, Vertical: 5゜ | Speaker Component | Low frequency: 20 cm (8“) cone-type
High frequency: Wave front control horn 110゜ (horizontal) × 5゜ (vertical)
+ compression driver × 2 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48“)
and Neutrik NL4MP × 2 | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | Dimensions | 526.6 (W) × 293 (H) × 296 (D) mm (20.73 × 11.54" × 11.65“) | Weight | 17 kg (37.48 lb) | Accessory | M8 connection bolt …4 | Option | Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206 |
|
The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34)
,conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft) | Water Protection | IPX4 | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“)“ | Weight | 16 kg (35.27 lb) | Accessory | M8 connection bolt …4 | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive? Woofer.
Specifications:
Frequency Range
|
:
|
57 Hz - 20 kHz(-10 dB)
|
Frequency Response
|
:
|
75 Hz - 20 Hz (+/-3db)
|
Coverage Pattern
|
:
|
100 x 15 nominal
|
Crossover Modes
|
:
|
4 Ohms Bi-amp / passive,
externally switchable
|
Crossover Frequency
|
:
|
132 dB SPL peak 1.2 kHz
|
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
|
System Maximum SPL
|
:
|
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
|
System Sensitivity (1w @ 1m
|
:
|
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
|
LF Driver
|
:
|
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps
|
HF Driver
|
|
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
|
Nominal Impedance
|
:
|
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
|
Active Tunings
|
:
|
Tunings available at www.jblpro.com
|
Enclosure
|
:
|
18 mm, 11-ply birch plywood
|
Suspension / Mounting
|
:
|
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
|
Finish
|
:
|
Black DuraFlex? finish
|
Grille
|
:
|
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
|
Input Connectors
|
:
|
Neutrik? Speakon? NL-4 (x2)
|
Dimensions (H x W x D)
|
:
|
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
|
Net Weight
|
:
|
21.8 kg (48 lb)
|
Optional Accessories
|
:
|
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
|
|
The SR-S4LWP is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Sealed type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 94 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | Operating Temperature | -10℃ to +50℃ | Water Protection | IPX4 | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | Dimensions | 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable) | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP,
Protection pad: SR-PP4, Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.