| Content |
TOA HX-5 Array system
Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1
|
The SR-C8LWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 5゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 5゜ (vertical)
+ compression driver × 2 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft)“ |
Water Protection
| Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 296 (D) mm (20.73 × 11.54" × 11.65“)“ | | Weight | 17 kg (37.48 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
A very compact, active, two-way line array loudspeaker module that delivers extraordinary power handling, clarity, flexibility and great sound in a compact, easy to handle and affordable package.
The 750 Watt Class-D Digipro amplifier module accurately matches the high quality analogue signal input board with precise, complex filter response that result in the natural, detailed reproduction of the best radiating designs.
The NX L23-A is the ideal choice when line array performance is needed and a fast and easy set up is a must.
| Features |
|---|
| 750 Watt Digipro digital amplifier | | 133 dB max spl | | 100 x 15, Wide dispersion constant directivity angle | | 12" woofer, high power neodymium 3.5" voice coil | | 3 x 1" HF driver, titanium dome, neodymium 1.75" voice coil | | PFC power factor correction |
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 60 Hz | ÷ 20 kHz | | Max SPL: | 133 dB | | | Horizontal coverage angle: | 100° | | | Vertical coverage angle: | Max 15° | | | Compression Driver: | 3 x 1" neo, 1.75" v.c. | | | Woofer: | 12" neo, 3.5" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Combo xlr-jack | | | Output connectors: | xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1300 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, hf correction cluster size | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 750 Watts | | | High frequencies: | 250 Watts | | | Low frequencies: | 500 Watts | | | Cooling: | Convection / foced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | Arry side fittings | | | Handles: | 2 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 346 / 13.62 mm/inch | | | Width: | 659 / 25.94 mm/inch | | | Depth: | 415 / 16.33 mm/inch | | | Net Weight: | 28.5 / 62.83 Kg/Lbs |
|
The SR-S4SWP is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | | Operating Temperature | -10℃ to +50℃ | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | | Dimensions | 160 (W) × 892 (H) × 303 (D) mm (excluding connected cable) | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
The VT4880 Dual 18" Subwoofer Line Array Element is designed to deliver high quality sound reinforcement of sub-low frequencies for live music and a variety of applications.
| Features : | | Specifications : |
- Advanced Technology Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers.
| - Advanced Construction Techniques and Hybrid Materials provide exceptionally rigid, lightweight enclosure.
| - Rugged DuraFlex™ exterior finish; Weatherized components.
| - Integrated S.A.F.E.™ suspension system: premium heat-treated alloys provide high-strength, reliable hanging arrays.
| | |
| Frequency Range | : | 26 Hz - 160 Hz (-10dB) |
| | Frequency Response | : | 29 Hz - 120 Hz (± 3 dB) |
| | Continuous Power Rating | : | 2000W |
| | Sensitivity | : | 98 dB (1 W/m) |
| | Nominal Impedances | : | 2 x 8 ohms |
| | Dimensions (W x H x D) | : | 1229 x 493 x 860 mm
(48.4 x 19.4 x 33.9 in) |
| | | |
|
The SR-C15B Sub-woofer system is designed to be used in conjunction with the SR-C8L or SR-C8S Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 450 W | | Rated Impedance | 8 Ω | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | | Speaker Component | 38 cm (15“) cone-type | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48“)
and Neutrik NL4MP × 2 | | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | | Weight | 41 kg (90.39 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8
Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.