TOA IR-200M Infrared Wireless Microphone

279.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed […]

 

Read more

The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

Specification
Battery IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces).
Current Consumption Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H)

Infrared Emitter

Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Transmission Distance Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space)
Tone Signal 32.768 kHz
Modulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84 dB is input)
Maximum Input Sound Pressure 120 dB SPL
Microphone Unit Unidirectional electret condenser microphone
Frequency Response 100 Hz – 12 kHz
Preemphasis 300 μs
Battery Operation Time Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter
Dimensions φ37 × 241.8 (H) mm (φ1.46″ × 9.52“)
Weight 170 g (0.37 lb) (with battery)
Accessory Screw driver (for setting) …1, Color label (6 colors) …1

 

Weight 0.17 kg

Reviews

There are no reviews yet.

Be the first to review “TOA IR-200M Infrared Wireless Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA IR-200M Infrared Wireless Microphone removeDAP AUDIO D145282 EB-193 Wireless Beltpack Transmitter removeLD Systems LDWS1616BP Belt Pack for WS1616 Series removeLD SYSTEMS LDWS1000G2MC Wireless condenser handheld microphone removeSHURE UR2/BETA58 Handheld Wireless Microphone removeAUDIO TECHNICA AEW-T4100A WIRELESS DYNAMIC MICROPHONE remove
NameTOA IR-200M Infrared Wireless Microphone removeDAP AUDIO D145282 EB-193 Wireless Beltpack Transmitter removeLD Systems LDWS1616BP Belt Pack for WS1616 Series removeLD SYSTEMS LDWS1000G2MC Wireless condenser handheld microphone removeSHURE UR2/BETA58 Handheld Wireless Microphone removeAUDIO TECHNICA AEW-T4100A WIRELESS DYNAMIC MICROPHONE remove
Image
SKUIR-200MD145282LDWS1616BPLDWS1000G2MCUR2/BETA58AEW-T4100A
Rating
Price 279.00 incl. GR VAT 99.20 incl. GR VAT 116.70 incl. GR VAT 240.86 incl. GR VAT 999.00 incl. GR VAT 589.74 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

Specification
Battery IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces).
Current Consumption Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H)
Infrared Emitter
Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Transmission Distance Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space)
Tone Signal 32.768 kHz
Modulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84 dB is input)
Maximum Input Sound Pressure 120 dB SPL
Microphone Unit Unidirectional electret condenser microphone
Frequency Response 100 Hz - 12 kHz
Preemphasis 300 μs
Battery Operation Time Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter
Dimensions φ37 × 241.8 (H) mm (φ1.46" × 9.52“)
Weight 170 g (0.37 lb) (with battery)
Accessory Screw driver (for setting) …1, Color label (6 colors) …1

 

EB-193 Wireless PLL Beltpack Transmitter 193 freq 822-846 MHz • PLL synthesised 193 switchable
frequencies.
• Operation in the UHF range
• Compatible for lavalier or headset
microphones
• Powered by AA batteries
• Equipped with 4P mini XLR connector
• LCD Frequency Preparation: PL Synthesized Control
Carrier Frequency Range: 600-960 MHz
RF Output: 10 mW
Stability: ±0.005%
Frequency Deviation: ±48 kHz
LCD Display: Frequency, battery
fuel gauge
Controls: Power On/Off, AF level,
Frequency Up/Down, Lock-on mode
Spurious Rejection: Audio Freq. response: 50 Hz - 16 kHz
Battery: UM3, AA 1.5V x 2 

Product type Wireless Microphone System Accessories


Type Belt Packs
Transmission frequency range 863.000 - 865,000 MHz
Channels 16
Inputs Mini-XLR (3-pin) with phantom power (for headset)
Frequency response 60 - 16.000 Hz
Rated HF output power 10
Controls ASC , Mic / 0dB / -10 dB switch , Power
Indicators power/battery status low (LED)
Operating voltage 2 x AA battery
Operating time >10 h (with alkaline batteries)
Width 65 mm
Height 85 mm
Depth 24 mm
Weight 0,1 kg
Other features incl. batteries , IR frequency synchronisation

96 CHN UHF TRUE DIVERSITY WIRELESS SYSTEM

The LD Systems WS 1000 G2 is an advanced 96 channel true diversity UHF wireless microphone system delivering natural sound with a wide dynamic range, high S/N ratio and low THD in both the 823 - 832 and 863 - 865 MHz bands. The WS 1000 G2 allows the use of up to 5 systems simultaneously and ships in various configurations. You can choose between dynamic or condenser handheld microphones, a beltpack transmitter with either a headset, lavalier-microphone, clip-on wind instrument microphone or guitar adaptor cable. It provides consistent audio transmission from 60 Hz to 16 kHz. Handhelds and beltpack feature convenient LCD indication of channel, group and battery status. Automatic channel scanning and the backlit multifunction receiver display facilitate system setup and operation. The operating time ranges up to 13 hours with high quality AA batteries. All WS 1000 G2 systems come with a rugged ABS plastic carrying case.

  • Handheld with high-quality condenser capsule
  • Convenient handling and channel setting via ASC
  • LCD display of channel, group and battery status
  • 2 AA batteries for up to 13 hours of operation
  • Model name: LDWS1000G2MC
  • Product type: Handheld microphone transmitter
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Microphone type: condenser
  • Directional characteristic: cardioid
  • Audio frequency response: 60 Hz - 16 kHz
  • RF output: 10 mW
  • Controls: Power On/Off
  • Indicators: LC display
  • Power supply: 2 x 1.5 V AA
  • Operating time: up to 13 hrs., battery-dependent
  • Length: 252 mm
  • Diameter: 50 mm

    Switchable RF Power (10/50mW, Region Dependent)
    Frequency and Power Lockout
    Bit-mapped Backlit LCD Display
    2 AA Batteries - Up to 8 hours Continuous Use
    Automatic Transmitter Setup
    All Metal Die-cast Construction

The AEW-T4100a cardioid dynamic wireless handheld transmitter features the Artist Elite® AE4100 cardioid capsule created for live sound venues. The element includes internal shock mounts for low handling noise. An integral two-stage pop filter within the rugged steel headcase protects against "p” pops and other breath plosives. All transmitter setup functions are menu-driven via soft-touch controls. To prevent accidental changes, the controls are covered by the transmitterʼs handle case when not being used. A red operational status LED indicates power-on. A dual-colour power/mute indicator LED provides visual indication of transmitter status. Operating on two standard AA batteries the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including: battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided. Four nameable user presets allow for storage and recall of commonly used settings. The rugged ergonomic metal body housing with integral antenna will provide years of dependable operation. Each handheld transmitter includes a heavy-duty Quiet-Flex™ stand clamp.

Artist Elite® AE4100 cardioid dynamic capsule with integral shock mount
Available in the following frequency bands:
541.500 - 566.375 MHz (C Band)
655.500 - 680.375 MHz (D Band)
721.500 - 746.375 MHz (G Band)
25 kHz frequency spacing makes it easier to find a clear, open frequency in crowded RF environments
Two-stage pop filter to protect against "p” pops
Dual output power selection to optimize battery life
Digital Tone Lock™ squelch to identify the wireless transmitter to the receiver
High efficiency dual companding system for flawless audio
Function menu displayed in a backlit LCD window and controlled by internal touch switches
Four nameable user presets
Operates on two AA batteries
Battery fuel gauge LCD readout on the body of the microphone
Power/mute lock provision
Dual-colour power/mute status indictor
18 dB audio input level adjustment
Rugged metal housing with integral antenna
Supplied with a heavy-duty microphone stand clamp

RF Power Output: High: 35 mW; Low: 10 mW, nominal
Spurious Emissions: According to National Regulations
Dynamic Range: >=110 dB, A-weighted
Microphone Element: Cardioid Dynamic
Batteries: Two 1.5V AA alkaline (not included)
Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
Dimensions: 237mm long, 48mm diameter
Net Weight: 276g
Accessory Included: AT8456a Quiet-Flex™ stand clamp

Weight0.17 kg1.00 kg0.20 kg0.25 kg0.30 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.17 kg
Weight 1.00 kg
Weight 0.20 kg
Weight 0.25 kg
Weight 0.30 kg
Weight 0.30 kg