Content |
The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.
(*1) 0 dB = 1 V Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | Power Consumption | 15 W or less | Receiving Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Receiver Sensitivity | S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation) | S/N Ratio | 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted) | Tone Squelch Frequency | 32.768 kHz | Infrared Receiver Input | 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals) | Output | Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output. | Frequency Response | 100 Hz - 12 kHz | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Case: ABS resin, black | Dimensions | 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“) | Weight | 630 g (1.39 lb) (unit only) | Accessory | AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4 | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together) |
|
Type of Receiver Dual independent receivers, automatic-switching diversity
RF Carrier Frequency Range Band C - 541.500 MHz to 566.375 MHz
Approx. Working Range 300 feet
Overall Frequency Response 70 Hz to 15 kHz
Signal-to-Noise Ratio 115 dB at 40 kHz deviation (IEC-weighted), maximum modulation 75 kHz
# Of Channels 200 Channels
Type of Output(s) Unbalanced: 1/4" TS (“mono“) phone jack
Balanced: XLRM-type
Headphone Monitoring 1/4" TRS Phone
Power Requirements 100-240V AC 50/60 Hz; 8W
Battery Type/Approx. Life AC Powered Only
Display Back-Lit LCD Display & Battery / Signal Status LED
Mounting Options Table Surface / Rack Mountable rack ears included
Antenna Type BNC Flexible UHF
Dimensions 8.31 x 1.74 x 9.26" (211.0 x 44.0 x 235.0mm) (WxHxD)
Weight 2.4 lbs (1.1 kg)
Mounting Options Table Surface / Rack Mountable rack ears included
Antenna Type BNC Flexible UHF
Dimensions 8.31 x 1.74 x 9.26" (211.0 x 44.0 x 235.0mm) (WxHxD)
Weight 2.4 lbs (1.1 kg)
Transmitter AEW-T3300 Handheld Transmitter
Type of Transmitter Frequency Agile Handheld
Type of Input Connector Not applicable
Type of Microphone Condenser
Polar Pattern Cardioid
Interchangeable Mic Heads No
Battery Type/Approx. Life (2) 1.5v AA Alkaline not included
Mute Switch Power / Mute switch dual function
Level Control No
Antenna Type Internal
Display Back-Lit LCD Display & Battery / Signal Status LED
Dimensions 9.41 x 1.97" (239 x 50mm)(Length x Diameter)
Weight 9.5 oz (270 grams) without batteries
|
The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.
(*1) 0 dB = 1 V Power Source | AC mains (supplied AC adapter must be used) | Power Consumption | 130 mA (12 V DC) | Receiving Frequency | 636 - 865 MHz(*2), UHF | Channel Selectable | 16 channels | Receiving System | Double super-heterodyne | Diversity System | Space diversity | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | Antenna | Rod antenna | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | Squelch Sensitivity | 18 - 40 dBμV variable | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | Tone Frequency | 32.768 kHz | Indicator | ANT A/B, Audio (peak), Battery alarm, Channel number | Channel Check | Usable frequencies scanning | S/N Ratio | 104 dB or more (A-weight, unbalanced output) | Harmonic Distortion | 1% or less (typical) | Frequency Response | 100 - 15,000 Hz, ±3 dB | Operating Temperature | -10℃ to +50℃ | Finish | Resin, black | Dimensions | 206 (W) × 40.6 (H) × 152.7 (D) mm (excluding antenna) | Weight | 590 g | Accessory | AC adapter(*3) …1 |
|
ER-1193
1 channel 193 Freq. PLL Receiver 822-846 MHz
2 Frequencies available:
790 - 814 MHz (Germany)
822 - 846 MHz
• 193 selectable UHF Frequencies.
• Available for 1 transmitter
• True diversity technology permits minimum dropouts in the RF link
• PLL synthesised technology for
multi-channels.
• Compact half-rack metal housing for
space saving
• "Lock-on" mode avoids accidental modification of frequency, sensitivity and power-off.
Frequency Preparation: PLL Synthesised Control
Carrier Freq. range: 600 MHz- 960 MHz
Frequency Stability: ±0.005%
S/N Ratio: >100 dB
Display: LCD
Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge
Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level
Audio Output Level: -12 dB
AF Output Impedance: 600 Ohm
Squelch: Pilot Tone & Noise Mute
Operation Voltage: 12-18 VDC, 500 mA
Output Connector: XRL Balanced/ 6,3 mm Unbalanced
Dimension: 211 x 152 x 40 mm (LxWxH) |
Δέκτης diversity 1 συχνότητας UHF (710-865mHz). Διαμόρφωση FM, εύρος 40-20kHz. Έξοδος MIC ή LINE level με XLR ή unbalanced jack 1/4. Κατάλληλος για όλους τους πομπούς της σειράς 40. |
Equipped with the same features as EM 2000 but designed as a twin receiver,EM 2050 makes it possible for the RF signal to be looped through with the help of an integrated active splitter. With this design, you can set up systems with up to 16 channels without using external splitters. An integrated equalizer and guitar tuning device complete the package.
Type: Stable Transmitter |
Reviews
There are no reviews yet.