Content |
Ψηφιακός μίκτης - επεξεργαστής matrix. Δέχεται έως 8 mic/line inputs και 8 εξόδους. Διαθέτει DSP και επιτρέπει τηλεφωνικό Paging. Υπάρχει δυνατότητα αυτόματου ελέγχου στάθμης εκπομπής σύμφωνα με τον θόρυβο περιβάλλοντος. Συναργάζεται με Η/Υ για τον προγραμματισμό και τη ρύθμισή του. Κατάλληλο για εγκαταστάσεις σε Meeting rooms, Εκκλησίες, συνεδριακές αίθουσες, restaurant κλπ. |
Analog Inputs Modular
Analog Outputs Modular
Audio Network CobraNet CM-1 Module (optional)
Cooling Left-to-right, 3-stage fan
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing
Digital Inputs Modular
Digital Outputs Modular
FIR-Drive Yes
GPIO Control Port 2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control) 3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact)3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing 2 DSPs Standard (150 MHz, 300 MIPS), DSP-2 Extension Module (3 dual core processors-1200 MIPS total) , 1 DSP per Audio Module (100 MHz, 100 MIPS) 1500 MIPS total without I/O cards
Network Control (IRIS-Net) Yes
Network Interface Ethernet-10/100 MBit/s, RJ-45
Power Consumption 90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply 100 - 240 VAC, 50/60 Hz
Sample Rate 48 kHz internal
Serial Interface 2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted) 115 dB
Total Harmonic Distortion 0.01 %
Height 2RU 88.1 mm (3.47“)
Width 483 mm (19.02“)
Depth 381 mm (15“)
Weight Net 7.37 kg (16.25 lbs)
|
Intelligent Control Panel, Wall-mountable.
The ICP1 intelligent control panel features controls virtually identical to those on the DME64N/DME24N
front panels, giving operators remote control capabilities for both DMEs. It offers unmatched ease of use
thanks to a large, easy-to-read backlit LCD display that shows names for scenes and function keys in 5
languages – Japanese, English, French, German and Spanish. The 6 function keys appearing at the top
and bottom of the LCD screen can be assigned to most parameters for easy remote control access.
These function keys are defined as a "function key set" or "page“. Up to 4 sets of "pages" are available –
for up to 24 parameters assignable to function keys. Users can change the "page" by pressing the
HOME key. A single function key can be used for simultaneous multiple parameter control by defining
parameter links. Function keys are defined with DME Designer software. |
- 8ch mic/line input and 8ch analog output
- 16ch YDIF digital I/O
- SD Card Slot for playback
| Although it can look quite simple, a small multi-zone installation is not always an easy or small job for the installer. He needs to install and connect many electronic units (sources, amplifiers, wall panels...) in order to provide the perfect audio solution for his customer. With Apartʼs AUDIOSYSTEM8.8 the installer now can propose a complete audio system to his customers that covers many small or medium sized applications... with just one unit! |
dbx 1261 Overview
The ZonePRO 1261 from dbx is a digital zone processor that features twelve-channels of input and six-outputs. The unit is suitable for installation in restaurants, fitness centers, nightclubs and any other situation that requires multiple-zone control of audio sources with paging features. The ZonePRO 1261 has no front panel control and requires a computer for initial set-up.
The processor provides two balanced inputs on Euroblock terminals that are selectable as line or microphone level (with phantom power) along with eight pairs of analog RCA line inputs, with each pair internally summed to mono. An RCA coaxial S/PDIF digital input is also available. Outputs are available via Euroblock terminals and can be configured as either stereo or mono. A DB-9 connector is located on the front panel for connecting to a computer.
The included Windows based control software communicates with the unit via RS-232 or Ethernet. Processor blocks can be switched in or out of a chain and include input gain, high-pass filtering, parametric EQ, compression, limiting, gating, AGC, ducking, de-essing, AFS (Advanced Feedback Suppression), notch filters, signal routing, band-pass filtering, delay and polarity. An AutoWarmth module provides gentle bass boost compensation as signal levels are lowered.
The ZonePRO 1261 really shines when utilized with optional remote wall-mount controllers that can be positioned within the various zones. The wall-mounts are able to provide local volume control or scene selection, dependent on the type of controller installed. A built-in real-time clock can provide programmable system changes throughout the day or week. All program memory is non-volatile, ensuring program security in the event of power failure or computer malfunction.
Note:
Stereo sources and stereo output can be configured using the control software, but input channels and number of zones available will be reduced correspondingly.
Twelve-channel input, six-output zone processor with no front panel control
Note:
Each pair of RCA inputs is internally summed to mono. To maintain a stereo source, two sets of inputs need to be used
Processing blocks available on both inputs and outputs
Up to six zones can receive independent audio sources, with paging priority
Note:
Number of zones available will depend on whether mono or stereo output channels are required, with zones available decreasing by two for every stereo channel
Local zone control is available utilizing the optional WC series of wall-mounted controllers
Microphone input can have AFS (Advanced Feedback Suppression) inserted with fixed or live filter response
“Autowarmth" module provides a bass-boost to low level signals
AGC (Automatic Gain Control) maintains even levels
Other dynamic DSP includes compression, limiting, noise gating and ducking
Includes band-pass and crossover filters, notch filtering and parametric EQ
Security lockout
Computer control via RS-232 and Ethernet
An analog input bus allows inputs from one unit to be sent to a another unit for application scalability
Frequency Response |
20Hz to 20kHz, +/-0.5dB |
Dynamic Range |
>110dB A-weighted, >107dB unweighted |
Inputs |
Balanced Microphone and Line on Euroblock 16 x RCA phono (analog) 1 x RCA coaxial S/PDIF (digital) |
Outputs |
Euroblock (6-outputs) |
Input Impedance |
Euroblock: >50kΩ balanced, >25kΩ unbalanced, RF filtered RCA: >25kΩ unbalanced, RF filtered |
Output Impedance |
Balanced: 120Ω Unbalanced: 60Ω |
Maximum Input Level |
Mic/Line: +20dBu RCA: +12dBu |
Maximum Output Level |
+20dBu |
Sample Rate |
48kHz |
Phantom Power |
+15V |
Crosstalk (Main Outputs) |
>80dB |
THD + N |
0.003% typical at +4dBu @ 1kHz, 0dB gain |
System Requirements |
For ZonePRO software: 1GHz or faster processor Windows 2000/XP 256MB RAM (512MB recommended) 1024 x 768 or higher screen resolution |
Dimensions (WxDxH) |
19 x 5.75 x 1.75" (483 x 146 x 45mm) |
Weight |
6.8 lbs (3.1 kg) |
In the Box
- dbx ZonePRO 1261 - 12-Input / 6-Output Digital Zone Processor without Front-Panel Control
|
Reviews
There are no reviews yet.