| Content |
Integrated with a resin panel and speaker frame, the PC-658R is the ceiling mount speaker with a metal attached. It features spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer.
| Rated Input | 6 W (100 V line), 3 W (70 V line) | | Rated Impedance | 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) | | Sensitivity | 90 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise) | | Frequency Response | 65 - 18,000 Hz (peak -20 dB) | | Speaker Component | 16 cm (6“) cone-type | | Dimensions for Fixing Hole | Mounting hole: φ170±5 mm (φ6.69“±0.2“)
Ceiling thickness: 5 - 25 mm (0.2" - 0.98“) | | Speaker Mounting Method | Spring clamp | | Finish | Baffle: Polypropylene resin, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color),
paint | | Dimensions | φ192 × 73 (D) mm (φ7.56" × 2.87“) | | Weight | 500 g (1.1 lb) | | Accessory | Paper pattern …1 |
|
JBL CONTROL CONTRACTOR 40 SERIES C40CS/T-PL Direct Radiating In-Ceiling Subwoofer
The Control 40CS/T is a direct radiating, high impact, 8" subwoofer with a built-in passive crossover network enabling the Control 40CS/T to be used as part of a subwoofer-satellite system. When combined with the Control 42, the Control 40CS/T offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance with minimal visual impact. The system can also be used via an active crossover design with the rest of the Control Contractor in-ceiling line for superior bass response and can be operated off a 70V / 100V distributed line or in direct mode.
Features:
Extended Bass Response with Maximum Impact
Passive Crossover Network for Easy to Install Subwoofer-Satellite Systems
Switchable 70V/100V or Low-Z
Elegant design fits any décor
Specifications:
Component: 8" long-throw woofer
Frequency Range: 30 Hz - 280 Hz
Power Capacity: 200W program, 100W pink noise
Sensitivity: 95 dB (near corner), 89 dB (center of ceiling), 1W, 1m
Nominal Impedance: 8 ohms
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Termination: Screw-down removable locking clip-in connector
Satellite Outputs: Connectors for 2 or 4 Control 42C satellite speakers
Included Accessories: C-rings, tile rails, paint shield, cutout template, grille
Dimensions (Diameter x Depth): 13.6" x 13.6“
|
ΑΒS Plastic. White
Mettalic Grid, White.
8” Dual Cone
Max Power: 20W
|
The JBL Professional Control 227CT is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227CT incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 227CT features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 227CT enabling the system to be used on 70V or 100V distributed speaker lines.
The Control 227C and CT are easy to install and feature a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.
The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C and CT is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
To ensure long life and reliability, Control 227C and CT pass JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.
Features
- Consistent 120° broadband pattern control for exceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5" woofer; 1" compression driver
- Extraordinary clarity for speech and vocals with extended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille (sold separately)
Specifications
- Frequency Range (-10dB): 43Hz - 19kHz
- Frequency Response (-3dB): 75Hz - 17kHz
- Nominal Sensitivity: 90dB measured half-space; 95dB computed for competitive comparison
- Nominal Coverage Angle: 120 degrees conical, broadband
- Nominal Impedance: 8 ohms
- Low Frequency: 6.5" Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia.): 12" round baffle x depth from back of baffle of 5.8“
|
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | Bass reflex type | | Rated Input | 60W (high impedance) | | Power Handling Capacity | Continuous pink noise: 90W(8Ω), 60W (16Ω)
Continuous program: 180W(8Ω), 120W(16Ω) | | Impedance | (100V Line) 170Ω (60W), 330Ω (30W) 670Ω (15W), 3.3kΩ (3W) | | Impedance | (70V Line) 83Ω (60W),170Ω (30W) 330Ω (15W), 670Ω (7.5W) 3.3kΩ (1.5W) | | Impedance | (25V Line) 83Ω (7.5W),170Ω (3.7W) 330Ω (1.9W), 670Ω (0.9W) 3.3kΩ (0.2W) | | Low (Adjustable | 16Ω, 8Ω | | Sound Pressure Level | 91dB(1W, 1m) | | Frequency Response | 60 - 20,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component | High frequency: Dome- type | | Speaker Component | Low frequency: 16cm cone-type | | Mounting Hole | ø250(maximum ceiling thickness: 37mm) | | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | | Finish Enclosure | Steel plate, plating | | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | | Punched net | Steel plate, white, paint | | Dust-proof bag | n/a | | Dimensions | ø280 x 227 (D)mm | | Weight | 5.1kg (including mounting accessories) | | Accessories Panel | 1 | | Ceiling reinforcement ring | 1 | | Safety wire | 1 | | Paper pattern | 1 | | Option Anchor hanging bracket | HY- AH1 | | Back can | n/a | | Tile bar bridge | HY- TB1 | | Trim ring | n/a | | Electronic controller | n/a |
|
Reviews
There are no reviews yet.